Application of Ionic Liquids in Electrochemistry—Recent Advances

In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.     

Selective Oxidation of Ethane to Acetic Acid Catalyzed by a C-Scorpionate Iron(II) Complex: A Homogeneous vs. Heterogeneous Comparison

The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe₃O₄/TiO₂/[FeCl₂{κ³-HC(pz)₃}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the “greeness” of the new ethane oxidation procedure.     

Probing Substrate/Catalyst Effects Using QSPR Analysis on Friedel-Crafts Acylation Reactions over Hierarchical BEA Zeolites

Attempts to optimize heterogeneous catalysis often lack quantitative comparative analysis. The use of kinetic modelling leads to rate (k) and relative sorption equilibrium constants (K), which can be further rationalized using Quantitative Structure-Property Relationships (QSPR) based on Multiple Linear Regressions (MLR). Friedel-Crafts acylation using commercial and hierarchical BEA zeolites as heterogeneous catalysts, acetic anhydride as the acylating agent, and a set of seven substrates with different sizes and chemical functionalities were herein studied. Catalytic results were correlated with the physicochemical properties of substrates and catalysts. From this analysis, a robust set of equations was obtained allowing inferences about the dominant factors governing the processes. Not entirely surprising, the rate and sorption equilibrium constants were found to be explained in part by common factors but of opposite signs: higher and stronger adsorption forces increase reaction rates, but they also make the zeolite active sites less accessible to new reactant molecules. The most relevant parameters are related to the substrates’ molecular size, which can be associated with different reaction steps, namely accessibility to micropores, diffusion capacity, and polarizability of molecules. The relatively large set of substrates used here reinforces previous findings and brings further insights into the factors that hamper/speed up Friedel-Crafts reactions in heterogeneous media.     

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

This work aims to determine the influence of fused deposition modeling (FDM) printing parameters on the mechanical properties of parts fabricated on an Ultimaker2 printer with acrylonitrile butadiene styrene (ABS). The effect of several parameters such as interlayer cooling time (ILCT), nozzle diameter, infill density, raster angle and layer thickness on the ultimate tensile strength, yield strength, and elastic modulus of produced parts was evaluated. Two independent studies were conducted: a first study dedicated to the ILCT and a second study where the influence of other parameters was evaluated through a design of experiments (DoE) approach. Both studies were carried out through the execution of standard tensile tests. The statistical analysis of tensile tests results was processed with the ANOVA methodology. The obtained results indicate that a reduced ILCT improves the tensile strength of parts. It is shown that nozzle diameter and infill density are the parameters that most influence the mechanical properties of ABS, with the upper range selected values improving the studied mechanical properties. The raster angle configuration of (?45^o/45^o) benefits UTS and yield strength of ABS samples. Interactions of nozzle diameter on layer thickness were detected. It was observed that smaller layer thickness promotes a higher elastic modulus and UTS; however, for thinner layers (0.06‐0.10 mm), no significant differences were found on strength of samples due to potential high distortion levels.     

Determination of phenolic compounds,in vitro antioxidant activity and characterization of secondary metabolites in different parts of Passiflora cincinnata by HPLC-DAD-MS/MS analysis

Abstract

Ethanol extracts of different parts of Passiflora cincinnata were obtained by maceration. The total phenolic and flavonoid contents were evaluated. The antioxidant activities were determined by β-carotene-linoleic acid bleaching test, 2,2-diphenyl-1-picrylhydrazil (DPPH), and 2,2’-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging. The crude ethanol stem extract showed the highest amount of total polyphenols (45.53?mg gallic acid equivalent/g) while the highest total flavonoid contents (1.42?mg of quercetin equivalent/g) were observed in the leaf extract. The lowest IC₅₀ (25.65?μg/ml) by the DPPH method was observed for the stem extract. The ABTS method showed a significant antioxidant activity for all investigated extracts. The secondary metabolite composition of ethanol extracts was assessed by HPLC-DAD-MS/MS analysis, leading to the identification of fourteen secondary metabolites in P. cincinnata extracts. These results showed the potentiality of this species as a source of phenolic compounds and antioxidants.     

Mountain pass theorems without Palais–Smale conditions

Using nonstandard analysis, we will prove two new mountain pass theorems which cannot be obtained from the well known classical mountain pass theorem of Ambrosetti–Rabinowitz.     

Local variation of the dielectric properties of poly(vinylidene fluoride) during the α- to β-phase transformation

The phase transformation from the non-polar α-phase to the polar electroactive β-phase of polyvinylidene fluoride (PVDF) has been investigated using the fluorescence from Nile red. Films of α-PVDF doped with Nile red were stretched at controlled rates at a temperature of 80 °C to produce the α- to β-phase transition. The thermo/mechanical dependent changes in the crystalline structure are related to the physical rotation of the polar (CH₂-CF₂) group, which can be monitored by steady state fluorescence techniques. The degree of phase transformation is related to variation in the fluorescence, which in turn is linked to local dielectric constant of the polymer. The variation of the refractive index is more associated to the alignment of the polymeric chains than to the phase transformation. Thus, fluorescence is a suitable technique to monitor phase transitions coupled to a variation in the polarity of the dielectric medium.