A general and efficient synthesis of sulfonylbenzotriazoles from N-chlorobenzotriazole and sulfinic acid salts

One-pot reactions of sulfinic acid salts (produced from organometallic reagents with SO2) with N-chlorobenzotriazole gave the corresponding N-alkane-, N-arene-, and N-heteroenesulfonylbenzotriazoles 3a-j in 41-93% yields. Reagents 3a-j are efficient sulfonylating agents, reacting at 20-80 degrees C with various primary and secondary aliphatic amines to yield the corresponding sulfonamides in 64-100% yields.     

Synthesis, characterization, photoluminescence and EPR investigations of Mn doped MgAl2O4 phosphors

MgAl₂O₄:Mn phosphors have been prepared at 500 °C by combustion route. Powder X-ray diffraction (XRD) indicated the presence of mono-MgAl₂O₄ phase. Scanning electron microscopy showed that the powder particle crystallites are mostly angular. Fourier transform infrared spectroscopy confirmed the presence of AlO₆ group which makes up the MgAl₂O₄ spinel. Photoluminescence studies showed green/red emission indicating that two independent luminescence channels in this phosphor. The green emission at 518 nm is due to ⁴T₁ → ⁶A₁ transition of Mn²⁺ ions. The emission at 650 nm is due to the charge-transfer deexcitation associated with the Mn ion. EPR spectrum exhibits allowed and forbidden hyperfine structure at g=2.003. The g≈2.00 is due to Mn²⁺ ion in an environment close to tetrahedral symmetry. It is observed that N and χ increase with decrease of temperature obeying the Boltzmann law. The variation of zero-field splitting parameter (D) with temperature is evaluated and discussed.     

Electric field gradients in various chemical environments of133Ba by the sum peak method

The sum peak at 437 keV (356+81 keV) has been measured in various chemical and physico-chemical environments. The fact that the intensity ratio of the sum peak to its single peak changes with the circumstances in which the radioactive source is placed is used to observe the effect of the chemical environment on directional correlation coefficients of 351–81 keV cascade in¹³³Ba−¹³³Cs decay and to detect the variations in the electric field gradient in different barium compounds. The sum peak method has been found to be useful in describing the chemical influences onG ₂₂ parameters and hence in the study of electric field gradients.     

Application of the sum peak method to study changes in the K-capture probability to the 1086 keV level and perturbed angular correlation parameters in the decay of152Eu

The sum peak method has been applied to electron capture probability changes to the 1086 keV level in the decay of¹⁵²Eu in the different environments, e.g. ethylenediaminetetraacetic acid (EDTA), bovine serum albumin (BSA) and hydrochloric acid (HCl). An attempt is also made to determine the effect of chemical environment on the directional correlation coefficient of the 1409–122 keV - cascade in¹⁵²Eu ¹⁵²Sm decay. A change of G₂₂ is found in the different chemical forms.     

An investigation of the properties of poly(dimethylsiloxane)-bioinspired silica hybrids

Elastomers typically require the incorporation of reinforcing fillers in order to improve their mechanical properties. For commercial silicone systems silica and titania are typically used as fillers. Fumed and precipitated silica are made on an industrial scale for many applications; however, we have shown recently that biological and synthetic macromolecules can generate new silica structures using a bioinspired route. Herein we have incorporated bioinspired silica fillers into poly(dimethylsiloxane) (PDMS) elastomers and investigated their mechanical, morphological and thermal properties as a function of filler loading. The equilibrium stress-strain characteristics of the PDMS-bioinspired silica hybrids were determined as a function of bioinspired filler loading and the Mooney-Rivlin constants (2C₁ and 2C₂) were calculated. The thermal characteristics, in particular glass transition temperatures (T_g) and melting points (T_m), of the PDMS-bioinspired silica hybrids were characterized using differential scanning calorimetry (DSC). The thermal stability of these hybrid materials were investigated using thermogravimetric analysis (TGA). The morphology of the samples was characterized using scanning electron microscopy (SEM), and the filler dispersion was characterized using ultra small angle X-ray scattering (USAXS) and scanning electron microscopy (SEM). Although spherical silica particles were used here, we have demonstrated elsewhere that this bioinspired synthetic route also enables highly asymmetric silica structures to be prepared such as fibres and sheets. This methodology therefore offers the interesting possibility of preparing new hybrid systems where the properties are highly anisotropic.     

Solvolytic behaviour and the solubilities of various inorganic compounds, lewis acids and bases in fused monobromo acetic acid solvent system—II

Solubilities and the solvolytic behaviour of various inorganic compounds, Lewis acids and bases in fused monobromoacetic acid at 60 ± 0.5°C are discussed. Ionic compounds are fairly soluble, iodides and thiocyanates being comparatively more soluble than chlorides and bromides. Tetraalkyl ammonium halides are highly soluble in this solvent. Conductometric and spectroscopic studies of various Lewis acids and bases in fused monobromoacetic acid indicate their solvolytic behaviour and their subsequent ionization. The solvolyses products BBr₃·CH₂BrCOOH and SbCl₅·CH₂BrCOOH have been observed to be the strongest Bronsted acids. Auto-ionization of this solvent has been supported by acid/base titrations.     

Nanoporous thermosetting polymers

Potential applications of nanoporous thermosetting polymers include polyelectrolytes in fuel cells, separation membranes, adsorption media, and sensors. Design of nanoporous polymers for such applications entails controlling permeability by tailoring pore size, structure, and interface chemistry. Nanoporous thermosetting polymers are often synthesized via free radical mechanisms using solvents that phase separate during polymerization. In this work, a novel technique for the synthesis of nanoporous thermosets is presented that is based on the reactive encapsulation of an inert solvent using step-growth cross-linking polymerization without micro/macroscopic phase separation. The criteria for selecting such a monomer-polymer-solvent system are discussed based on FTIR analysis, observed micro/macroscopic phase separation, and thermodynamics of swelling. Investigation of resulting network pore structures by scanning electron microscopy (SEM) and small-angle X-ray scattering following extraction and supercritical drying using carbon dioxide showed that nanoporous polymeric materials with pore sizes ranging from 1 to 50 nm can be synthesized by varying the solvent content. The differences in the porous morphology of these materials compared to more common free radically polymerized analogues that exhibit phase separation were evident from SEM imaging. Furthermore, it was demonstrated that the chemical activity of the nanoporous materials obtained by our method could be tailored by grafting appropriate functional groups at the pore interface.     

Ca(2.5)Sr(0.5)GaMn2O8: diamagnetic Ga in control of the structural and electronic properties of a bilayered manganate

The temperature dependence of the crystal structure and electronic properties of brownmillerite-like Ca(2.5)Sr(0.5)GaMn(2)O(8) has been studied by neutron powder diffraction and muSR spectroscopy. The results show that short-range 2D magnetic order begins to develop within the perovskite-like bilayers of MnO(6) octahedra approximately 50 K above the 3D Néel temperature of approximately 150 K. The bilayers show a structural response to the onset of magnetism throughout this temperature range whereas the GaO(4) layers that separate the bilayers only respond below the 3D ordering temperature. XANES spectroscopy shows that the sample contains Mn(3+) and Mn(4+) cations in a 1:1 ratio, and the behavior in the region of the Néel transition is interpreted as a local charge ordering. Electron diffraction and high-resolution electron microscopy have been used to show that the local microstructure is more complex than the average structure revealed by neutron diffraction, and that microdomains exist in which the GaO(4) tetrahedra show different orientations. It is argued that the bonding requirements of diamagnetic gallium control the electronic behavior within the perovskite-like bilayers.     

Efficient synthesis of [1,3]oxazino[2,3-a]quinoline derivatives by a novel 1,4-dipolar cycloaddition involving a quinoline-DMAD zwitterion and carbonyl compounds

An efficient synthesis of [1,3]oxazino[2,3-a]quinoline derivatives via a three-component reaction of quinoline, DMAD and carbonyl compounds is described.