TG and DSC analyses of eucalyptus black liquor as alternative methods to estimate solids content

As a consequence of the continuous increase in the production rate of pulp and paper mills around the world, a great quantity of black liquor, a by-product of the wood digestion process, is produced. This by-product has a great potential as biomass, but needs to be concentrated to higher solids content to be burned as fuel in a recovery boiler. This is necessary to make the pulping process economically feasible, incinerating black liquor to produce high pressure steam, recycling inorganic chemicals to the process. The greater the solids content in black liquor, the better the combustion process in the boiler. Nevertheless, concentration of solids in black liquor above 75 mass/%, causes scaling formation on the heat transfer surfaces of evaporators and concentrators, due to the precipitation of sodium salts, reducing the overall efficiency of this equipment. The aim of this work is to evaluate the use of thermal analyses techniques, TG and DSC, as alternative methods to estimate solids content in eucalyptus black liquor samples since this information is essential to understand scaling formation process, allowing actions to reduce this industrial problem. Traditional techniques applied to determine solids content use gravimetric methods, which are simple, fine, but take a lot of time to be executed. Thermal analyses have proved to be very accurate and have the advantage to be faster than the traditional techniques. On the other hand, the cost-benefit relationship of the traditional technique is much greater and the final decision which one should be used depends on the conditions available.     

Determination of long-lived radionuclides in radioactive wastes from the IEA-R1 nuclear research reactor

Ion-exchange resins and activated charcoal beds are employed for purification of the cooling water that is pumped through the core of pool type nuclear research reactors. Once expended, these media are replaced and become radioactive wastes that contain low concentrations of long-lived fission and activation products, uranium isotopes and transuranium elements. Determination of the radioactive inventory is of paramount importance in the management of such radioactive wastes, which, besides high-energy photon emitters that can be identified and quantified directly by gamma-ray spectrometry, also contain pure alpha, pure beta and low-energy photon emitters whose quantitative determination require radiochemical separation. These later are collectively known as difficult to measure (DTM) radionuclides. A characterization program embracing the DTM radionuclides is currently in progress for spent ion-exchange resins and activated charcoal beds that were definitively withdrawn from the water cleanup system of the IEA-R1 nuclear research reactor. Radiochemical methods used in the characterization program include separations with specific anionic resins, chromatographic extractions and co-precipitation, which enabled the measurement of the activity concentrations of ⁹⁰Sr, ²³⁴U, ²³⁵U, ²³⁸U, ²³⁸Pu, ^239+240Pu, ²⁴¹Pu, ²⁴¹Am and ²⁴⁴Cm. An enhanced retention of uranium and transuranium elements was observed in the activated charcoal compared to the ion-exchange resins as a result of the tendency of actinides to undergo hydrolysis in aqueous solutions.     

Synthesis and Transformations of 5‐Chloro‐2,2′‐Dipyrrins and Their Boron Complexes, 8‐Chloro‐BODIPYs

Symmetric dipyrrylketones 1 a , b were synthesized in two steps from the corresponding α‐free pyrroles, by reaction with thiophosgene followed by oxidative hydrolysis under basic conditions. The dipyrrylketones produced the corresponding 5‐chloro‐dipyrrinium salts or 5‐ethoxy‐dipyrrins on reaction with phosgene or Meerwein’s salt, respectively. Boron complexation of the dipyrrins afforded the corresponding 8‐functionalized BODIPYs (borondipyrromethenes) in high yields. The 5‐chloro‐dipyrrinium salts reacted with methoxide or ethoxide ions to produce monopyrrole esters, presumably via a 5,5‐dialkoxy‐dipyrromethane intermediate. In contrast, 8‐chloro‐BODIPYs underwent a variety of nucleophilic substitutions of the chloro group in the presence of alkoxide ions, Grignard reagents, and thiols. In the presence of excess alkoxide or Grignard reagent, at room temperature or above, substitution at the boron center also occurred. The 8‐chloro‐BODIPY was a particularly useful reagent for the preparation of 8‐aryl‐, 8‐alkyl‐, and 8‐vinyl‐substituted BODIPYs in very high yields, using Pd⁰‐catalyzed Stille cross‐coupling reactions. The X‐ray structures of eleven BODIPYs and two pyrroles are presented, and the spectroscopic properties of the synthesized BODIPYs are discussed.     

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

This work aims to determine the influence of fused deposition modeling (FDM) printing parameters on the mechanical properties of parts fabricated on an Ultimaker2 printer with acrylonitrile butadiene styrene (ABS). The effect of several parameters such as interlayer cooling time (ILCT), nozzle diameter, infill density, raster angle and layer thickness on the ultimate tensile strength, yield strength, and elastic modulus of produced parts was evaluated. Two independent studies were conducted: a first study dedicated to the ILCT and a second study where the influence of other parameters was evaluated through a design of experiments (DoE) approach. Both studies were carried out through the execution of standard tensile tests. The statistical analysis of tensile tests results was processed with the ANOVA methodology. The obtained results indicate that a reduced ILCT improves the tensile strength of parts. It is shown that nozzle diameter and infill density are the parameters that most influence the mechanical properties of ABS, with the upper range selected values improving the studied mechanical properties. The raster angle configuration of (?45^o/45^o) benefits UTS and yield strength of ABS samples. Interactions of nozzle diameter on layer thickness were detected. It was observed that smaller layer thickness promotes a higher elastic modulus and UTS; however, for thinner layers (0.06‐0.10 mm), no significant differences were found on strength of samples due to potential high distortion levels.     

Nickel Supported on Alkaline Earth Metal–Doped γ-Al2O3–La2O3 as Catalysts for Dry Reforming of Methane

Russian Journal of Applied Chemistry - Nickel catalysts supported on γ–Al2O3 doped with La2O3 and alkaline earth oxides (MgO, CaO, and SrO) were investigated in the dry reforming of...     

Probing the Brønsted Acidity of the External Surface of Faujasite-Type Zeolites

We outline two methodologies to selectively characterize the Brønsted acidity of the external surface of FAU-type zeolites by IR and NMR spectroscopy of adsorbed basic probe molecules. The challenge and goal are to develop reliable and quantitative IR and NMR methodologies to investigate the accessibility of acidic sites in the large pore FAU-type zeolite Y and its mesoporous derivatives often referred to as ultra-stable Y (USY). The accessibility of their Brønsted acid sites to probe molecules (n-alkylamines, n-alkylpyridines, n-alkylphosphine- and phenylphosphine-oxides) of different molecular sizes is quantitatively monitored either by IR or ³¹P NMR spectroscopy. It is now possible, for the first time to quantitatively discriminate between the Brønsted acidity located in the microporosity and on the external surface of large pore zeolites. For instance, the number of external acid sites on a Y (LZY-64) zeolite represents 2 % of its total acid sites while that of a USY (CBV760) represents 4 % while the latter has a much lower framework Si/Al ratio.     

The concept of proof in the light of mathematical work

ZDM – Mathematics Education - Our article aims to show how illuminating mathematical work as a concept from didactics of mathematics is useful in understanding issues relating to proving and...     

A method for the estimation of the film thickness and plate tilt angle in thin film misaligned plate–plate rheometry

This communication describes a general procedure for the estimation of the true gap and tilt angle in commercially available torsional flow plate–plate rheometers by simply measuring the torque and normal force acting on the plates when shearing a Newtonian fluid.     

Another Proof for the Presentation of the Quantum Cohomology of the Moduli of Bundles over a Riemann Surface

The presentation of the quantum cohomology of the moduli spaceof stable vector bundles of rank two and odd degree with fixeddeterminant over a Riemann surface of genus g > 2 is obtained.The argument avoids the use of gauge theory, providing an alternativeproof to that given by the author in Duke Math. J. 98 (1999)525–540. 2000 Mathematics Subject Classification 14N35(primary); 14H60, 53D45 (secondary).