Tetrahydrofuran–water extraction,in-line clean-up and selective liquid chromatography/tandem mass spectrometry for the quantitation of perfluorinated compounds in food at the low picogram per gram level

A new solvent extraction system was developed for extraction of PFCs from food. The extraction is carried out with 75:25 (v/v) tetrahydrofuran:water, a solvent mixture that provides an appropriate balance of hydrogen bonding, dispersion and dipole–dipole interactions to efficiently extract PFCs with chains containing 4–14 carbon atoms from foods. This mixture provided recoveries above 85% from foods including vegetables, fruits, fish, meat and bread; and above 75% from cheese. Clean-up with a weak anion exchange resin and Envi-carb SPE, which were coupled in line for simplicity, was found to minimize matrix effects (viz. enhancement or suppression of electrospray ionization). The target analytes (PFCs) were resolved on a perfluorooctyl phase column that proved effective in separating mass interferences for perfluorooctane sulfonate (PFOS) in fish and meat samples. The mass spectrometer was operated in the negative electrospray ionization mode and used to record two transitions per analyte and one per mass-labeled method internal standard. The target PFCs were quantified from solvent based calibration curves. The limits of detection (LODs) were as low as 1–5 pg analyte g⁻¹ food; by exception, those for C₄ and C₅ PFCs were somewhat higher (25–30 pg g⁻¹) owing to their less favourable mass response. To the best of our knowledge these are among the best LODs for PFCs in foods reported to date. The analysis of a variety of foods revealed contamination with PFCs at levels from 4.5 to 75 pg g⁻¹ in 25% of samples (fish and packaged spinach). C₁₀–C₁₄ PFCs were found in fish, which testifies to the need to control long-chain PFCs in this type of food. The proposed method is a useful tool for the development of a large-scale database for the presence of PFCs in foods.     

Impurity profiling of acetylspiramycin by liquid chromatography–ion trap mass spectrometry

Investigation of acetylspiramycin (ASPM) and its related substances was carried out using a reversed-phase liquid chromatography/tandem mass spectrometry method. The identification of impurities in the ASPM complex was performed with a quadrupole ion trap mass spectrometer, with an electrospray ionization (ESI) source in the positive ion mode which provides MSⁿ capability. A total of 83 compounds were characterized in commercial samples, among which 31 impurities that had never been reported and 31 partially characterized impurities were deduced using the collision-induced dissociation (CID) spectra of major ASPM components as templates. Most of the major impurities arise from the starting materials and the synthesis process. This work provides very useful information for quality control of ASPM and evaluation of its synthesis process.     

Accurate particle size distribution determination by nanoparticle tracking analysis based on 2-D Brownian dynamics simulation

A physical model is presented to simulate the average step length distribution during nanoparticle tracking analysis experiments as a function of the particle size distribution and the distribution of the number of steps within the tracks. Considering only tracks of at least five steps, numerical simulation could be replaced by a normal distribution approximation. Based on this model, simulation of a step length distribution allows obtaining a much more reliable estimation of the particle size distribution, thereby reducing the artificial broadening of the distribution, as is typically observed by direct conversion of step length to particle size data. As this fitting procedure also allowed including data from particles that were followed for a relatively low number of steps, the measurement time could be reduced for particles that are known to be monodisperse. Whereas the inversion is less sensitive towards the particle size distribution width, still similar values were obtained for both the average diameter and standard deviation of a polystyrene latex sample irrespective of the track length, provided that the latter included at least five steps.     

Distortion of the Poisson Bracket by the Noncommutative Planck Constants

In this paper we introduce a kind of “noncommutative neighbourhood” of a semiclassical parameter corresponding to the Planck constant. This construction is defined as a certain filtered and graded algebra with an infinite number of generators indexed by planar binary leaf-labelled trees. The associated graded algebra (the classical shadow) is interpreted as a “distortion” of the algebra of classical observables of a physical system. It is proven that there exists a q-analogue of the Weyl quantization, where q is a matrix of formal variables, which induces a nontrivial noncommutative analogue of a Poisson bracket on the classical shadow.     

Measurement of the B(+) production cross section in pp collisions at sqrt[s]=7 TeV

Measurements of the total and differential cross sections dσ/dp(T)(B) and dσ/dy(B) for B(+) mesons produced in pp collisions at sqrt[s]=7 TeV are presented. The data correspond to an integrated luminosity of 5.8 pb(-1) collected by the CMS experiment operating at the LHC. The exclusive decay B(+)→J/ψK(+), with J/ψ→μ(+)μ(-), is used to detect B(+) mesons and to measure the production cross section as a function of p(T)(B) and y(B). The total cross section for p(T)(B)>5 GeV and |y(B)|<2.4 is measured to be 28.1±2.4±2.0±3.1 μb, where the first uncertainty is statistical, the second is systematic, and the last is from the luminosity measurement.     

Measurement of the t-channel single top quark production cross section in pp collisions at √s=7 TeV

Electroweak production of the top quark is measured for the first time in pp collisions at √=7 TeV, using a data set collected with the CMS detector at the LHC and corresponding to an integrated luminosity of 36 pb?1. With an event selection optimized for t-channel production, two complementary analyses are performed. The first one exploits the special angular properties of the signal, together with background estimates from the data. The second approach uses a multivariate analysis technique to probe the compatibility with signal topology expected from electroweak top-quark production. The combined measurement of the cross section is 83.6±29.8(stat+syst)±3.3(lumi) pb, consistent with the standard model expectation.     

Loss reduction in silicon nanophotonic waveguide micro-bends through etch profile improvement

Single mode silicon photonic wire waveguides allow low-loss sharp micro-bends, which enables compact photonic devices and circuits. The circuit compactness is achieved at the cost of loss induced by micro-bends, which can seriously affect the device performance. The bend loss strongly depends on the bend radius, polarization, waveguide dimension and profile. In this paper, we present the effect of waveguide profile on the bend loss. We present waveguide profile improvement with optimized etch chemistry and the role of etch chemistry in adapting the etch profile of silicon is investigated. We experimentally demonstrate that by making the waveguide sidewalls vertical, the bend loss can be reduced up to 25% without affecting the propagation loss of the photonic wires. The bend loss of a 2 μm bend has been reduced from 0.039dB/90° bend to 0.028dB/90° bend by changing the sidewall angle from 81° to 90°, respectively. The propagation loss of 2.7 ± 0.1dB/cm and 3 ± 0.09dB/cm was observed for sloped and vertical photonic wires respectively was obtained.     

Search for stopped Gluinos in pp collisions at square root s=7 TeV

The results of the first search for long-lived gluinos produced in 7 TeV pp collisions at the CERN Large Hadron Collider are presented. The search looks for evidence of long-lived particles that stop in the CMS detector and decay in the quiescent periods between beam crossings. In a dataset with a peak instantaneous luminosity of 1×10(32) cm-2 s-1, an integrated luminosity of 10 pb-1, and a search interval corresponding to 62 hours of LHC operation, no significant excess above background was observed. Limits at the 95% confidence level on gluino pair production over 13 orders of magnitude of gluino lifetime are set. For a mass difference mg - mχ1(0) >100 GeV/c2, and assuming BR(g→gχ1(0))=100%, mg < 370 GeV/c2 are excluded for lifetimes from 10 μs to 1000 s.