Adsorption and preconcentration of divalent metal ions in fossil fuels and biofuels: gasoline, diesel, biodiesel, diesel-like and ethanol by using chitosan microspheres and thermodynamic approach

Biodiesel and diesel-like have been obtained from soybean oil by transesterification and thermal cracking process, respectively. These biofuels were characterized as according to ANP standards by using specific ASTM methods. Ethanol, gasoline, and diesel were purchased from a gas station. Deacetylation degree of chitosan was determined by three distinct methods (conductimetry, FTIR and NMR), and the average degree was 78.95%. The chitosan microspheres were prepared from chitosan by split-coating and these spheres were crosslinked using glutaraldehyde. The surface area of microspheres was determined by BET method, and the surface area of crosslinked microspheres was 9.2 m² g⁻¹. The adsorption isotherms of cooper, nickel and zinc on microspheres of chitosan were determined in petroleum derivatives (gasoline and diesel oil), as well as in biofuels (alcohol, biodiesel and diesel-like). The adsorption order in all fuels was: Cu > Ni > Zn. The elution tests presented the following preconcentration degrees: >4.5 to ethanol, >4.4 to gasoline, >4.0 to diesel, >3.8 to biodiesel and >3.6 to diesel-like. The application of chitosan microspheres in the metal ions preconcentration showed the potential of this biopolymer to enrich fuel sample in order to be analyzed by flame atomic absorption spectrometry.     

Spectrophotometric flow injection monitoring of sulfide during sugar fermentation

A spectrophotometric flow injection procedure involving N,N-dimethyl-p-phenylenediamine (DMPD) is applied to the sulfide monitoring of a sugar fermentation by Saccharomyces cerevisiae under laboratory conditions. The gaseous chemical species evolving from the fermentative process, mainly CO₂, are trapped allowing a cleaned sample aliquot to be collected and introduced into the flow injection analyzer. Measurement rate, signal repeatability, detection limit and reagent consumption per measurement were estimated as 150 h⁻¹, 0.36% (n = 20), 0.014 mg L⁻¹ S and 120 μg DMPD, respectively. The main characteristics of the monitoring record are discussed. The strategy is worthwhile for selecting yeast strain, increasing the industrial ethanol production and improving the quality of wines.     

Quantitative analysis by comprehensive two-dimensional gas chromatography using interval Multi-way Partial Least Squares calibration

A new approach for target quantitative analysis for comprehensive two-dimensional gas chromatography (GC × GC), interval Multi-way Partial Least Square (iNPLS) is presented and evaluated in this paper. In iNPLS, the two-dimensional chromatogram is split in small sections; each of these pieces is treated as an independent new chromatogram. Separated conventional NPLS calibration models for the concentration of the target analyte are built for each of the pieces of the whole chromatogram, and the best model is selected for quantitative analysis. An algorithm for iNPLS running on MatLab platform was written, preliminarily evaluated with using solutions of model compounds with different chemical properties and subsequently applied to quantify some allergens in perfume samples. The results were found to be adequate, and good precision and accuracy was obtained even for poorly resolved peaks.     

Molecular cloning and transgenic expression of a synthetic human erythropoietin gene in tobacco

Erythropoietin (EPO) is a hormone belonging to a group of hematopoietic growth factors that control the proliferation and differentiation of bone marrow cells. It induces the production of erythrocytes, thereby increasing the amount of circulating hemoglobin and oxygen. Previous attempts to transgenically express human EPO in plants failed to succeed because the plants exhibited abnormal morphology and infertility. In the present work, we describe the generation of fertile transgenic tobacco plants able to express a synthetic version of human EPO. A 582-bp fragment of the human EPO gene was synthesized using a PCR-based method and ligated into pCR-Blunt. After sequencing, the human EPO fragment was transferred to pWUbi.tm1 and the expression cassette was then transferred to the binary vector pWBVec4a. After Agrobacterium-mediated transformation of Nicotiana tabacum SR1 plants, integration of the transgene into T₀ and T₁ plant genomes was confirmed by PCR. The human EPO gene was found to be expressed in tobacco leaves at the mRNA and protein levels. Self-crossing allowed us to obtain T₁ plants exhibiting Mendelian segregation of the transgene. None of the plants presented any kind of malformation or deformity.     

Phase behavior of (CO2 + methanol + lauric acid) system

In this study the phase equilibrium behaviors of the binary system (CO₂ + lauric acid) and the ternary system (CO₂ + methanol + lauric acid) were determined. The static synthetic method, using a variable-volume view cell, was employed to obtain the experimental data in the temperature range of (293 to 343) K and pressures up to 24 MPa. The mole fractions of carbon dioxide were varied according to the systems as follows: (0.7524 to 0.9955) for the binary system (CO₂ + lauric acid); (0.4616 to 0.9895) for the ternary system (CO₂ + methanol + lauric acid) with a methanol to lauric acid molar ratio of (2:1); and (0.3414 to 0.9182) for the system (CO₂ + methanol + lauric acid) with a methanol to lauric acid molar ratio of (6:1). For these systems (vapor + liquid), (liquid + liquid), (vapor + liquid + liquid), and (solid + fluid) transitions were observed. The phase equilibrium data obtained for the systems were modeled using the Peng–Robinson equation of state with the classical van der Waals mixing rule with a satisfactory correlation between experimental and calculated values.     

Room temperature, metal-free synthesis of diaryl ethers with use of diaryliodonium salts

A fast, high-yielding synthesis of diaryl ethers with use of mild and metal-free conditions has been developed. The scope includes bulky ortho-substituted diaryl ethers, which are difficult to obtain by metal-catalyzed protocols. Halo-substituents, racemization-prone amino acid derivatives, and heteroaromatics are also tolerated. The methodology is expected to be of high utility in the synthesis of complex molecules and in the pharmaceutical industry.     

On a refinement of Craig’s lattices

Let p be an odd prime. A family of (p−1)-dimensional over-lattices yielding new record packings for several values of p in the interval [149…3001] is presented. The result is obtained by modifying Craig’s construction and considering conveniently chosen Z-submodules of Q(ζ), where ζ is a primitive pth root of unity. For p≥59, it is shown that the center density of the (p−1)-dimensional lattice in the new family is at least twice the center density of the (p−1)-dimensional Craig lattice.     

A hybrid shuffled complex evolution approach based on differential evolution for unconstrained optimization

Numerous optimization methods have been proposed for the solution of the unconstrained optimization problems, such as mathematical programming methods, stochastic global optimization approaches, and metaheuristics. In this paper, a metaheuristic algorithm called Modified Shuffled Complex Evolution (MSCE) is proposed, where an adaptation of the Downhill Simplex search strategy combined with the differential evolution method is proposed. The efficiency of the new method is analyzed in terms of the mean performance and computational time, in comparison with the genetic algorithm using floating-point representation (GAF) and the classical shuffled complex evolution (SCE-UA) algorithm using six benchmark optimization functions. Simulation results and the comparisons with SCE-UA and GAF indicate that the MSCE improves the search performance on the five benchmark functions of six tested functions.     

Synthesis and application of imprinted polyvinylimidazole-silica hybrid copolymer for Pb determination by flow-injection thermospray flame furnace atomic absorption spectrometry

A novel ion imprinted polyvinylimidazole-silica hybrid copolymer (IIHC) was synthesized and used as a selective solid sorbent for Pb²⁺ ions preconcentration using an on-line solid phase extraction (SPE) system coupled to TS-FF-AAS. The ionic hybrid sorbent was prepared using 1-vinylimidazole and 3-(trimethoxysilyl)propylmethacrylate as monomers, Pb²⁺ ions as template, tetraethoxysilane as reticulating agent and 2,2′-azobis-isobutyronitrile as initiator. The best on-line SPE conditions concerning sorption behavior, including sample pH (6.46), buffer concentration (9.0 mmol L⁻¹), eluent (HNO₃) concentration (0.5 mol L⁻¹) and preconcentration flow rate (4.0 mL min⁻¹), were optimized by means of full factorial design and Doehlert matrix. The analytical curve ranged from 2.5 to 65.0 μg L⁻¹ (r = 0.999) with limit of detection of 0.75 μg L⁻¹; the precision (repeatability) calculated as relative standard deviation (n = 10) was 5.0 and 3.6% for Pb²⁺ concentration of 10.0 and 60.0 μg L⁻¹, respectively. From on-line breakthrough curve, column capacity was 3.5 mg g⁻¹. Preconcentration factor (PF), consumptive index (CI) and concentration efficiency (CE) were 128.0, 0.16 mL and 25.6 min⁻¹, respectively. The selective performance of the sorbent, based on relative selectivity coefficient, was compared to NIC (non imprinted copolymer) for the binary mixture Pb²⁺/Cd²⁺, Pb²⁺/Cu²⁺ and Pb²⁺/Zn²⁺. The results showed that ion imprinted polyvinylimidazole-silica hybrid polymer had higher selectivity for Pb²⁺ than NIC at 64.9, 16.0 and 8.8 folds. The developed method was successfully applied for highly sensitive and selective Pb²⁺ determination in different kinds of water samples, parenteral solutions and urine. Accuracy was also assessed by analyzing certified reference fish protein (DORM-3) and marine sediment (MESS-3 and PACS-2) with satisfactory results.