Ion-pair reversed-phase high-performance liquid chromatography analysis of oligonucleotides: retention prediction

An ion-pair reversed-phase HPLC method was evaluated for the separation of synthetic oligonucleotides. Mass transfer in the stationary phase was found to be a major factor contributing to peak broadening on porous C18 stationary phases. A small sorbent particle size (2.5 microm), elevated temperature and a relatively slow flow-rate were utilized to enhance mass transfer. A short 50 mm column allows for an efficient separation up to 30mer oligonucleotides. The separation strategy consists of a shallow linear gradient of organic modifier, optimal initial gradient strength, and the use of an ion-pairing buffer. The triethylammonium acetate ion-pairing mobile phases have been traditionally used for oligonucleotide separations with good result. However, the oligonucleotide retention is affected by its nucleotide composition. We developed a mathematical model for the prediction of oligonucleotide retention from sequence and length. We used the model successfully to select the optimal initial gradient strength for fast HPLC purification of synthetic oligonucleotides. We also utilized ion-pairing mobile phases comprised of triethylamine (TEA) buffered by hexafluoroisopropanol (HFIP). The TEA-HFIP aqueous buffers are useful for a highly efficient and less sequence-dependent separation of heterooligonucleotides.     

Cyclotetrasilazane als precursor für cyclotrisilazane und bis(cyclodisilazan-1-yl)silane

Di-lithiated octamethylcyclotetrasilazane (OMCTS, 1) reacts with halosilanes in different ways. Ring contraction with formation of the isomeric cyclodisilazanes 2, 3 occurs in the reaction with chloro- and fluorotrimethylsilanes. Substitution (6) and ring contraction with formation of the isomeric six-membered ring 7 occurs with chlorodimethylsilane. 2, 3, 6 and 7 are excellent precursors of silyl-bridged, SiH-functional, four-membered ring systems (4, 5, 9–11). The mechanism of the isomerization reactions are discussed.     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Nonspecific interactions of a carboxylate-substituted PPE with proteins. A cautionary tale for biosensor applications

Two carboxylate-substituted, fluorescent (Phi = 0.08), water-soluble poly(p-phenyleneethynylene)s (PPE) and a water-soluble model compound were exposed to a series of proteins and bovine serum. While the anionic PPEs do not have any specific binding sites, they form stable complexes with histone, lysozyme, myoglobin, and hemoglobin. The complex formation was evidenced by fluorescence quenching. Bovine serum albumin does not quench the fluorescence of the PPEs but enhances it, probably due to its surfactant character. These results imply that the use of charged conjugated polymers as biosensors, while an attractive proposition, has to take into account strong nonspecific interactions between conjugated polymers and the host of proteins that is found in cells and complex biological fluids.     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

Zur Reaktion von Hydrazinen mit Fluorsilanen und lithiierten Aminen

Lithium salts of hydrazines react with fluorosilanes under formation of fluorosilylhydrazines and LiF. Five membered rings are obtained in the reaction of bis(fluorosilyl)-hydrazines with lithiated amines. The mass,¹H-and¹⁹F-nmr spectra of the compounds are reported.

     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

Determination of telmisartan in human blood plasma: Part I: Immunoassay development

Telmisartan is an angiotensin II receptor antagonist and a known drug against high blood pressure. In this report, the development of a new and rapid analytical technique, an enzyme-linked immunosorbent assay (ELISA) for the determination of telmisartan in human blood plasma is described. The immunoassay is based on a conversion of 4-(N-methylhydrazino)-7-nitro-2,1,3-benzooxadiazole (MNBDH) to 4-(N-methylamino)-7-nitro-2,1,3-benzooxadiazole (MNBDA), which is detected by fluorescence spectroscopy. The limit of detection was 0.1 ng/mL, the limit of quantification was 0.3 ng/mL and the working range extended from 0.3 ng/mL to 300 ng/mL.     

2,2‐Dichloro‐1,3‐bis(trimethylsilyl)‐1,3‐diaza‐2‐silacyclopentane

In the title compound, C₈H₂₂Cl₂N₂Si₃, the central Si atom is tetrahedrally coordinated by two Cl and two N atoms in a molecule that has crystallographically imposed C₂ symmetry. Comparison is made with the isomorphous structure having titanium instead of silicon at the central position in the diazacyclopentane ring [Tinkler, Deeth, Duncalf & McCamley (1996). Chem. Commun. pp. 2623–2624].