Organic–Inorganic Hybrid Supermicroporous Iron(III) Phosphonate Nanoparticles as an Efficient Catalyst for the Synthesis of Biofuels

Here we report a novel family of crystalline, supermicroporous iron(III) phosphonate nanomaterials (HFeP‐1‐3, HFeP‐1‐2, and HFeP‐1‐4) with different Fe^III‐to‐organophosphonate ligand mole ratios. The materials were synthesized by using a hydrothermal reaction between benzene‐1,3,5‐triphosphonic acid and iron(III) chloride under acidic conditions (pH≈4.0). Powder X‐ray diffraction, N₂ sorption, transmission and scanning electron microscopy (TEM and SEM) image analysis, thermogravimetric and differential thermal analysis (TGA‐DTA), and FTIR spectroscopic tools were used to characterize the materials. The triclinic crystal phase [P$\bar 1$ (2) space group] of the hybrid iron phosphonate was established by a Rietveld refinement of the PXRD analysis of HFeP‐1‐3 by using the MAUD program. The unit cell parameters are a=8.749(1), b=8.578(1), c=17.725(3) Å; α=104.47(3), β=97.64(1), γ=113.56(3)°; and V=1013.41 ų. With these crystal parameters, we proposed an 24‐membered‐ring open framework structure for HFeP‐1. Compound HFeP‐1‐3, with an starting Fe/ligand molar ratio of 3.0, shows the highest Brunauer–Emmett–Telller (BET) surface area of 556 m²g^?1 and uniform supermicropores of approximately 1.1 nm. The acidic surface of the porous iron(III) phosphonate nanoparticles was used in a highly efficient and recyclable catalytic transesterification reaction for the synthesis of biofuels under mild reaction conditions.     

Sorption of iron(III)–alginate complexes on cellulose fibres

Multivalent ions take a significant role in the sorption of soluble polysaccharides on solid cellulose substrates and thus demonstrate an important principle in structural polysaccharide organisation. Sorption of Fe(III)–alginate complexes on lyocell fibres as model for the insoluble cellulose matrix has been studied between pH 3–13, at 30 and 60 °C. Sorption maximum of the Fe(III)–alginate complex was observed at pH 3 where the sorbed amounts of alginate and iron were 6,600 and 85 mg iron per kg cellulose respectively. Under the experimental conditions used, a concentration of 0.05 mM Fe(III) is sufficient to achieve surface sorption of Fe(III)–alginate complex. The alginate sorption exhibited minor dependence on molar ratio of Fe(III) to alginate. In environmental scanning electron microscopy no deposition of Fe-hydroxides on the fiber surface was detected. The thickness of the adsorbed Fe(III)–alginate layer on the fiber surface was estimated with 12–22 nm. Tensile strength and abrasion resistance of Fe(III)–alginate treated fibers were not reduced through the sorption treatment. Alginate modified cellulose is of interest as material for medical application, as sorbent and textile finish.     

Visible‐Light‐Induced Generation of H2 by Nanocomposites of Few‐Layer TiS2 and TaS2 with CdS Nanoparticles

Graphene analogues of TaS₂ and TiS₂ (3–4 layers), prepared by Li intercalation followed by exfoliation in water, were characterized. Nanocomposites of CdS with few‐layer TiS₂ and TaS₂ were employed for the visible‐light‐induced H₂ evolution reaction (HER). Benzyl alcohol was used as the sacrificial electron donor, which was oxidized to benzaldehyde during the reaction. Few‐layer TiS₂ is a semiconductor with a band gap of 0.7 eV, and its nanocomposite with CdS showed an activity of 1000 μmol h^?1 g^?1_. The nanocomposite of few‐layer TaS₂, in contrast, gave rise to higher activity of 2320 μmol h^?1 g^?1, which was attributed to the metallic nature of few‐layer TaS₂. The amount of hydrogen evolved after 20 and 16 h for the CdS/TiS₂ and CdS/TaS₂ nanocomposites was 14833 and 28132 μmol, respectively, with turnover frequencies of 0.24 and 0.57 h^?1, respectively.     

Planar Iron Hydride Nanoclusters: Combined Spectroscopic and Theoretical Insights into Structures and Building Principles

The controlled assembly of well-defined planar nanoclusters from molecular precursors is synthetically challenging and often plagued by the predominant formation of 3D-structures and nanoparticles. Herein, we report planar iron hydride nanoclusters from reactions of main group element hydrides with iron(II) bis(hexamethyldisilazide). The structures and properties of isolated Fe₄, Fe₆, and Fe₇ nanoplatelets and calculated intermediates enable an unprecedented insight into the underlying building principle and growth mechanism of iron clusters, metal monolayers, and nanoparticles.     

Allylic Functionalization of Unactivated Olefins with Grignard Reagents

New advances in the functionalization of unactivated olefins with carbon nucleophiles have provided more efficient and practical approaches to convert inexpensive starting materials into valuable products. Recent examples have been reported with stabilized carbon nucleophiles, tethered carbon nucleophiles, diazoesters, and trifluoromethane donors. A general method for functionalizing olefins with aromatic, aliphatic, and vinyl Grignard reagents was developed. In a one‐pot process, olefins are oxidized by a commercially available reagent to allylic electrophiles, which undergo selective copper‐catalyzed allylic alkylation with Grignard reagents. Products are formed in high yield and with high regioselectivity. This was utilized to synthesize a series of skipped dienes, a class of compounds that are prevalent in natural products and are difficult to synthesize by known allylic alkylation methods.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

para-Selective Arylation of Arenes: A Direct Route to Biaryls by Norbornene Relay Palladation

Biaryl compounds are extremely important structural motifs in natural products, biologically active components and pharmaceuticals. Selective synthesis of biaryls by distinguishing the subtle reactivity difference of distal arene C−H bonds are significantly challenging. Herein, we describe para-selective C−H arylation, which is acheived by a unique combination of a meta-directing group and norbornene as a transient mediator. Upon direct meta-C−H palladation, one-bond relay palladation occurs in presence of norbornene and subsequently para-C−H arylation is achieved for sulfonates, phosphonates and phenols bearing 2,6-disubstitution patterns. The protocol is amenable to electron-deficient aryl iodides. Multisubstituted arenes and phenols are obtained by postsynthetic modification of the products. The protocol allows the synthesis of hexa-substituted benzene by sequential selective distal C−H functionalization.     

Recent advances of lead-free metal halide perovskite single crystals and nanocrystals: synthesis,crystal structure,optical properties,and their diverse applications

Lead halide hybrid perovskites have received massive research attention because of their unique inherent photophysical properties that driven them for potential application in the fields of photovoltaics, light-emitting devices, lasing, X-ray detector, and so on. Perovskite single crystals and nanocrystals are generally synthesized via various low-cost solution-processed techniques. The emergence of simple growth approaches of perovskite structures enable to fabricate low-cost and highly efficient devices. However, toxicity of Pb atoms and instability of perovskite structures obstruct further commercialization of these technologies. Recent efforts have been shifted to discover novel, eco-friendly, and stable lead-free metal halide perovskite (LFHP) materials and exploring their different growth processes for various device applications. This review aims to provide an up-to-date analysis of recent progress report on LFHPs and will mainly focus on their growth processes in the single crystalline and nanocrystalline forms. This review also tries to understand how the perovskite crystal structure impacts on their fundamental properties. In addition, we discuss the current progress in various field of applications and their future aspects.     

Mixed ionic and electronic conductivity study of charge transfer complexes of some substituted pyridines with iodine monochloride (ICl) by AC impedance spectroscopy

Mixed ionic and electronic conductivity of three solid charge transfer (CT) complexes of pyridine, 4-methylpyridine (γ-picoline) and 3,5-dimethylpyridine (3,5-lutidine) with ICl (iodine monochloride) are reported. Electrical parameters of the prepared complexes in the pellet form are evaluated at various temperatures and at wide frequency range by employing AC complex impedance spectroscopic technique. Suitable equivalent circuits for the Nyquist plots, which provide the most realistic model of the electrical properties of the CT complexes, have been suggested. Both transport number measurements and impedance spectra reveal that the conduction in γ-picoline-ICl complex is mainly due to ions, in 3,5-dimethylpyridine-ICl complex, it is due to both ions and electrons and in pyridine-ICl complex, it is predominantly due to electrons. The a.c. conductivity measurements of the CT complexes have been carried out in the frequency range of 10–10⁵ Hz within the temperature range of 303–353 K. The variation of a.c. conductivity with frequency follows the Jonscher’s universal power law. The temperature dependence of electrical conductivity suggests the semiconducting behaviour of the materials.