A model for high temperature creep of single crystal superalloys based on nonlocal damage and viscoplastic material behavior

A model for high temperature creep of single crystal superalloys is developed, which includes constitutive laws for nonlocal damage and viscoplasticity. It is based on a variational formulation, employing potentials for free energy, and dissipation originating from plasticity and damage. Evolution equations for plastic strain and damage variables are derived from the well-established minimum principle for the dissipation potential. The model is capable of describing the different stages of creep in a unified way. Plastic deformation in superalloys incorporates the evolution of dislocation densities of the different phases present. It results in a time dependence of the creep rate in primary and secondary creep. Tertiary creep is taken into account by introducing local and nonlocal damage. Herein, the nonlocal one is included in order to model strain localization as well as to remove mesh dependence of finite element calculations. Numerical results and comparisons with experimental data of the single crystal superalloy LEK94 are shown.     

Enhancement of electrical stability of a-IGZO TFTs by improving the surface morphology and packing density of active channel

a-IGZO films were deposited on Si substrates by d.c sputtering technique with various working power densities (p_d) in the range of 0.74–2.22 W/cm². The correlation between material properties and their effects on electrical stability of a-IGZO thin-film transistor (TFTs) was studied as a function of p_d. At a p_d of 1.72 W/cm² a-IGZO film had smoothest surface roughness (0.309 nm) with In-rich and Ga-poor cation compositions as a channel. This structurally ordered TFTs exhibited a high field effect mobility of 9.14 cm²/Vs, a sub-threshold swing (S.S.) of 0.566 V/dec, and an on–off ratio of 10⁷. Additionally, the V_th shift in hysteresis loop is almost eliminated. It was shown that the densification of the a-IGZO film resulted in the reduction of its interface trap density (1.83 × 10¹² cm^?2), which contributes for the improvement in the electrical and thermal stability.     

Hand-held syringe as a portable plastic pump for on-chip continuous-flow PCR: miniaturization of sample injection device

On-chip continuous-flow polymerase chain reactions (PCRs) generally require peripheral apparatus such as a pump for injecting a sample liquid into the fluidic channel. This makes the overall instrumentation bulky, limiting integration. In this study, we propose a new scheme for injecting a sample employing a hand-held syringe as a portable plastic pump, and apply it to an on-chip continuous-flow PCR. In the proposed injection scheme, sample actuation was realized inside a highly gas-permeable and blunt-ended fluidic conduit connected to a hand-held plastic syringe filled with compressed air. In this system, the degree of air diffusion via the walls of the gas-permeable conduit becomes greater in the anterior (closer to the outlet) end of the sample plug than the posterior (closer to the inlet) end, because a relatively larger quantity of air is retained inside the syringe at the posterior end of the sample plug. This creates a pressure gradient at the inlet and outlet of the fluidic conduit and propels the sample forward toward the outlet. Preliminary experiments were performed for the quantitative analyses and evaluation of the proposed sample injection scheme using gas-permeable silicone tubes. As practical applications, a 230 bp gene fragment from a plasmid vector and the first 282 bp of the interferon-beta (IFN-β) promoter from a human genomic DNA were successfully amplified on a microdevice coupled with a hand-held syringe as a portable sample actuation device, greatly enhancing device portability for on-site analyses.     

Exponential Convergence of Time-Delay Systems in the Presence of Bounded Disturbances

In this paper, the problem of control design for exponential convergence of state/input delay systems with bounded disturbances is considered. Based on the Lyapunov–Krasovskii method combining with the delay-decomposition technique, a new sufficient condition is proposed for the existence of a state feedback controller, which guarantees that all solutions of the closed-loop system converge exponentially (with a pre-specified convergence rate) within a ball whose radius is minimized. The obtained condition is given in terms of matrix inequalities with one parameter needing to be tuned, which can be solved by using a one-dimensional search method with Matlab’s LMI Toolbox to minimize the radius of the ball. Two numerical examples are given to illustrate the superiority of the proposed method.     

Output feedback guaranteed cost control of uncertain linear discrete systems with interval time-varying delays

This paper deals with output feedback guaranteed cost control problem for a general class of uncertain linear discrete delay systems, where the state and the observation output are subjected to interval time-varying delay. The proposed output feedback controller uses the observation measurement to exponentially stabilize the closed-loop system and guarantee an adequate level of system performance. By constructing a set of augmented Lyapunov–Krasovskii functionals, a delay-dependent condition for the robust output feedback guaranteed cost control is established in terms of linear matrix inequalities (LMIs). Three numerical examples are provided to demonstrate the efficiency of the proposed method.     

Study on mechanism of ultrasonic fluorescence modulation in light scattering medium based on diffusion approximation with varying refractive index

In this study, we propose a model to describe the mechanism of ultrasonic fluorescence modulation based on the application of a modified diffusion approximation, which is derived from the radiative transfer equation with consideration of the varying refractive index. The model was evaluated by computation with finite element method (FEM) to simulate the physical phenomena of our previous experiments. The simulation shows that the measured power of the modulated fluorescence signal at the boundary of 40-mm-thick light scattering medium (scattering coefficient and anisotropy factor of 1.36mm^?1 and 0.67, respectively) with the fluorophore located at the center was 10^?20 of the incident laser power. The analysis based on the simulation results indicates the significant property of the modulation in which the modulated signal is combination including two processes generated from the variation of the refractive index and fluorophore concentration (the contributions of these are equivalent), whereas the contribution of the variation of the scattering coefficient is negligibly small. The profile of the fluorescence image and the characteristics of the quadratic relationship between the modulated intensity signal and the sound pressure are consistent with our previous experimental results.     

“Printing” DNA Strand Patterns on Small Molecules with Control of Valency,Directionality, and Sequence

The incorporation of synthetic molecules as corner units in DNA structures has been of interest over the last two decades. In this work, we present a facile method for generating branched small molecule‐DNA hybrids with controllable valency, different sequences, and directionalities (5′–3′) using a “printing” process from a simple 3‐way junction structure. We also show that the DNA‐imprinted small molecule can be extended asymmetrically using polymerase chain reaction (PCR) and can be replicated chemically. This strategy provides opportunities to achieve new structural motifs in DNA nanotechnology and introduce new functionalities to DNA nanostructures.     

Results on MeV-scale dark matter from a gram-scale cryogenic calorimeter operated above ground

Models for light dark matter particles with masses below 1 GeV/c\(^2\) are a natural and well-motivated alternative to so-far unobserved weakly interacting massive particles. Gram-scale cryogenic calorimeters provide the required detector performance to detect these particles and extend the direct dark matter search program of CRESST. A prototype 0.5 g sapphire detector developed for the \(\nu \)-cleus experiment has achieved an energy threshold of \(E_{th}=(19.7\pm 0.9)\) eV. This is one order of magnitude lower than for previous devices and independent of the type of particle interaction. The result presented here is obtained in a setup above ground without significant shielding against ambient and cosmogenic radiation. Although operated in a high-background environment, the detector probes a new range of light-mass dark matter particles previously not accessible by direct searches. We report the first limit on the spin-independent dark matter particle-nucleon cross section for masses between 140 and 500 MeV/c\(^2\).     

Antioxidant Properties of Hydrogen Gas Attenuates Oxidative Stress in Airway Epithelial Cells

Oxidative stress plays a crucial role in the development of airway diseases. Recently, hydrogen (H₂) gas has been explored for its antioxidant properties. This study investigated the role of H₂ gas in oxidative stress-induced alveolar and bronchial airway injury, where A549 and NCI-H292 cells were stimulated with hydrogen peroxide (H₂O₂) and lipopolysaccharide (LPS) in vitro. Results show that time-dependent administration of 2% H₂ gas recovered the cells from oxidative stress. Various indicators including reactive oxygen species (ROS), nitric oxide (NO), antioxidant enzymes (catalase, glutathione peroxidase), intracellular calcium, and mitogen-activated protein kinase (MAPK) signaling pathway were examined to analyze the redox profile. The viability of A549 and NCI-H292 cells and the activity of antioxidant enzymes were reduced following induction by H₂O₂ and LPS but were later recovered using H₂ gas. Additionally, the levels of oxidative stress markers, including ROS and NO, were elevated upon induction but were attenuated after treatment with H₂ gas. Furthermore, H₂ gas suppressed oxidative stress-induced MAPK activation and maintained calcium homeostasis. This study suggests that H₂ gas can rescue airway epithelial cells from H₂O₂ and LPS-induced oxidative stress and may be a potential intervention for airway diseases.     

Investigation characteristics of polyvinyl alcohol film dyed methylene blue and irradiated by gamma source

Journal of Radioanalytical and Nuclear Chemistry - The polyvinyl alcohol (PVA) films dyed methylene blue containing different masses of boric acid and PVA powder were investigated. The dyed PVA...