A Validated RP–LC Method for Simultaneous Determination of Losartan Potassium and Amlodipine Besilate in Pharmaceutical Preparations

A simple RP–LC method for simultaneous quantification of losartan and amlodipine and separation of their degradation products has been developed. For this purpose we tested appropriated mobile phase pH range, flow rate, temperature and different columns. The method was validated with an ODS column. A gradient of acetonitrile and phosphate pH 3.0 buffer was utilized as mobile phase. The linearity was determined at 50–150% level. Individual recoveries at 70–130% level ranged from 98.8 to 100.5% for losartan and 96.4–101.2% for amlodipine. The robustness was also evaluated. Although losartan has much higher quantities than amlodipine in commercial tablets, this method allowed simultaneous quantification for both drugs.     

Sensitive Determination of Water Insoluble Dyes Used as Marking of Commercial Petroleum Products Using High‐Performance Liquid Chromatography with Electrochemical Detection

This paper describes an analytical method using high‐performance liquid chromatographic (HPLC) separation coupled with electrochemical detection to detect three dyes, Solvent Blue 14 (SB‐14), Solvent Blue 35 (SB‐35) and Solvent Red 24 (SR‐24). The dyes were eluted and separated using a reversed‐phase column (C‐8) under isocratic elution with the mobile phase containing a mixture of acetonitrile/ammonium acetate (5.0 mmol L^?1) at the ratio of 75 : 25 (v/v). Two sample pretreatment methods were tested and successfully applied to quantify SB14, SB‐35 and SR‐24 dyes in gasoline samples. The proposed method was simple, fast and suitable to detect and quantify marker dyes in gasoline sample at low concentration.     

Nitric oxide-dependent pigment migration induced by ultraviolet radiation in retinal pigment cells of the crab Neohelice granulata

The purpose of this study was to verify the occurrence of pigment dispersion in retinal pigment cells exposed to UVA and UVB radiation, and to investigate the possible participation of a nitric oxide (NO) pathway. Retinal pigment cells from Neohelice granulata were obtained by cellular dissociation. Cells were analyzed for 30 min in the dark (control) and then exposed to 1.1 and 3.3 J cm⁻² UVA, 0.07 and 0.9 J cm⁻² UVB, 20 n m β-PDH (pigment dispersing hormone) or 10 μ m SIN-1 (NO donor). Histological analyses were performed to verify the UV effect in vivo . Cultured cells were exposed to 250 μ m L-NAME (NO synthase blocker) and afterwards were treated with UVA, UVB or β-PDH. The retinal cells in culture displayed significant pigment dispersion in response to UVA, UVB and β-PDH. The same responses to UVA and UVB were observed in vivo . SIN-1 did not induce pigment dispersion in the cell cultures. l-NAME significantly decreased the pigment dispersion induced by UVA and UVB but not by β-PDH. All retinal cells showed an immunopositive reaction against neuronal nitric oxide synthases. Therefore, UVA and UVB radiation are capable of inducing pigment dispersion in retinal pigment cells of Neohelice granulata and this dispersion may be nitric oxide synthase dependent.     

Histopathological Analysis of UVB and IR Interaction in Rat Skin

To determine the chronic skin effects caused by the interaction of infrared and ultraviolet B radiations, male Rattus norvegicus (Wistar) (2 months old) were exposed for 15 days to infrared radiation (600–1500 nm, with a peak at 1000 nm, n = 12) for 30 min (1080 J cm^?2) (IRo); to ultraviolet B radiation (peak emission at 313 nm, n = 9) for 90 min (55.08 J cm^?2) (UVB); to infrared radiation followed after 90 min by ultraviolet B (n = 6) (IRUVB) and to ultraviolet B followed after 90 min by infrared radiation (n = 9) (UVBIR). Skin samples were collected and histopathological analysis showed the presence of acanthosis, parakeratotic and orthokeratotic hyperkeratosis, intraepidermal pustules, keratin pearls, detachment of epidermis, collagen necrosis, inflammatory infiltrate, vasodilation, basal cell vacuolization and superficial dermis degeneration both in UVB and UVBIR treatments. IRUVB animals showed the same characteristics as above except for parakeratotic hyperkeratosis, keratin pearls and superficial dermis degeneration. To conclude, infrared radiation exposure after ultraviolet B irradiation increases skin damage without protecting the tissue, while infrared radiation exposure before ultraviolet B irradiation showed a protective effect against ultraviolet skin damage.     

Chemiluminescence as a PDT light source for microbial control

The photodynamic therapy (PDT) is a combination of using a photosensitizer agent, light and oxygen that can cause oxidative cellular damage. This technique is applied in several cases, including for microbial control. The most extensively studied light sources for this purpose are lasers and LED-based systems. Few studies treat alternative light sources based PDT. Sources which present flexibility, portability and economic advantages are of great interest. In this study, we evaluated the in vitro feasibility for the use of chemiluminescence as a PDT light source to induce Staphylococcus aureus reduction. The Photogem? concentration varied from 0 to 75 μg/ml and the illumination time varied from 60 min to 240 min.The long exposure time was necessary due to the low irradiance achieved with chemiluminescence reaction at μW/cm2 level. The results demonstrated an effective microbial reduction of around 98% for the highest photosensitizer concentration and light dose. These data suggest the potential use of chemiluminescence as a light source for PDT microbial control, with advantages in terms of flexibility, when compared with conventional sources.     

Monitoring process for attributes with quality deterioration and diagnosis errors

The aim of this paper is to present an online economical quality-control procedure for attributes in a process subject to quality deterioration after random shift and misclassification errors during inspections. The process starts in control (State I) and, in a random time, it shifts to out of control (State II). Once at State II, the non-conforming fraction increases according to a non-decreasing function ψ(z), where z is the number of items produced after a shift. The monitoring procedure consists of inspecting a single item at every m produced items, which is examined r times independently to decide its condition. Once an inspected item is declared non-conforming, the process is stopped and adjusted. A direct search technique is used to find the optimum parameters which minimize the expected cost function. The proposed model is illustrated by a numerical example. Copyright © 2007 John Wiley & Sons, Ltd.     

Antiferromagnetically coupled multilayers of (Co90Fe10 tF/Ru tRu)×N and (Ni81Fe19 tF/Ru tRu)×N prepared by ion beam deposition

This work describes multilayers of Co₉₀Fe₁₀ t_F/Ru t_Ru/Co₉₀Fe₁₀ t_F and Ni₈₁Fe₁₉ t_F/Ru t_Ru/Ni₈₁Fe₁₉ t_F (20 Åt_F200 Å) prepared at ambient temperature by ion beam deposition on Si/SiO₂ 3 kÅ substrates. The samples exhibited a maximum antiferromagnetic coupling with t_Ru=3.2 Å and M–H curves characterized by zero remanent magnetic moment and enhanced saturation field. Antiferromagnetic peaks were present with t_Ru17 and 30 Å.