Preparation,spectroscopic and magnetic characterization of Cu(cyclam)M(CN)<Subscript>4</Subscript> complexes exhibiting one-dimensional crystal structures (cyclam = 1,4,8,11-tetraazacyclotetradecane,M = Ni,Pd, Pt)

From the systems Cu(II)–cyclam–[M(CN)₄]^2? (cyclam = 1,4,8,11-tetraazacyclotetradecane; M = Ni, Pd, Pt), three cyanidocomplexes Cu(cyclam)M(CN)₄ [M = Ni (1), Pd (2), Pt (3)] were isolated and characterized by chemical analysis, IR and UV–VIS spectroscopy. The three compounds are isostructural, and their crystal structures are formed by quasi-linear chains exhibiting [–Cu(cyclam)–μ–NC–M(CN)₂–μ–CN–]_n composition. The Cu(II) atoms reside on centres of symmetry and are coordinated in the form of an elongated octahedron with mean equatorial Cu–N bonds of 2.015(12), 2.017(13) and 2.011(11) Å in (1), (2) and (3), respectively, and weakly N-bonded bridging cyanido ligands in the axial positions [2.5321(9) Å in (1), 2.518(2) Å in (2) and 2.549(3) Å in (3)]. Hydrogen bonds of the N–H···N_cyanido···H–N type link neighbouring chains, and a topologically square network of paramagnetic Cu(II) atoms is formed. The magnetic susceptibilities of all three complexes follow the Curie-Weiss law with a weak antiferromagnetic exchange coupling below 5 K.     

Mechanical properties of silica hydrogels prepared and aged at physiological conditions: testing in the compression mode

The mechanical properties for silica hydrogel prepared at physiological conditions are reported in this paper. The mechanical testing was performed in the compression mode determining the mechanical characteristics as a function of aging time in TRIS buffer up to 14 days. In addition to a typically used gradient method for Young’s modulus determination from the stress–strain curves, a new phenomenological model was proposed to describe the experimental data. The mechanical properties were stabilized after 2 days of aging, which was concluded from an increase in Young’s modulus between 90 and 400 kPa, an increase in stress at break between 50 and 100 kPa and by a decrease in relative deformation at break from 0.26 to 0.16. The height of samples was constant in the first three days of aging followed by a decrease by ~20%. Dissolving of silica hydrogel characterized through determination of silica content in TRIS buffer employing the molybdenum method was not found to be responsible for this phenomenon. The phenomenological model is proposed to be used for a reliable evaluation of mechanical properties of silica as well as other hydrogels exhibiting low Young’s modulus.     

Down-regulation of Bcl-2 and Akt induced by combination of photoactivated hypericin and genistein in human breast cancer cells

Presented experiment considers combination of genistein and photodynamic therapy with hypericin with a view to achieve higher therapeutic outcome in human breast adenocarcinoma cell lines MCF-7 and MDA-MB-231, both identified in our conditions as photodynamic therapy resistant. Since genistein is known to suppress Bcl-2 expression, we predicted that photodynamic therapy with hypericin might benefit from mutual therapeutic combination. In line with our expectations, combined treatment led to down-regulation of Bcl-2 and up-regulation of Bax in both cell lines as well as to suppression of Akt and Erk1/2 phosphorylation induced by photoactivated hypericin in MCF-7 cells. Although Akt and Erk1/2 phosphorylation was not stimulated by photodynamic therapy with hypericin in MDA-MB-231 cells, it was effectively suppressed in combination. Variations in cell death signaling favoring apoptosis were indeed accompanied by cell cycle arrest in G₂/M-phase, activation of caspase-7, PARP cleavage and increased occurrence of cells with apoptotic morphology of nucleus. All these events corresponded with suppression of proliferation and significantly lowered clonogenic ability of treated cells. In conclusion, our results indicate that pre-treatment with tyrosine kinase inhibitor genistein may significantly improve the effectiveness of photodynamic therapy with hypericin in MCF-7 and MDA-MB-231 breast cancer cells.     

Picture change error correction of radon atom electron density

The importance of the picture change error (PCE) correction in the quasirelativistic electron density of radon atom is presented. PCE correction is considered for the infinite order two-component (IOTC) and second order Douglas-Kroll-Hess (DKH2) wave functions. Implementation details of PCE correction of electron density are outlined. The result section presents the radial distributions of electron density ρ(r) and the 4πr(2)ρ(r) function of the radon atom in the nuclear region. The PCE corrected and contaminated DKH2, IOTC electron densities are presented and compared with the Dirac-Coulomb Hamiltonian and nonrelativistic electron densities. Besides, some additional effects in electron density and SCF energy are considered, such as spin-orbit coupling, the inclusion of the Gaunt term, and the finite nucleus model effects. The effects of p(2)Vp(2) and p(2)ρ(r)p(2) analytic integral classes within IOTC Hamiltonian and PCE correction of IOTC electron density are considered.     

Communication: Experimental proof of symmetry breaking in tilted smectics composed of molecules with axial chirality

For the first time, domains with twisted structures have been established in planar samples of achiral compounds in tilted smectic C phase. This evidences separation of molecular conformers differing in the sense of axial chirality and confirms polar C(2) symmetry of these domains. A simple model considering polar surface anchoring energy and bulk energy of the twist can account for this finding. Conditions for coexistence of twisted and homogeneous domains are discussed.     

Al3+, Ca2+, Mg2+, and Li+ in aqueous solution: calculated first-shell anharmonic OH vibrations at 300 K

The anharmonic OH stretching vibrational frequencies, ν(OH), for the first-shell water molecules around the Li(+), Ca(2+), Mg(2+), and Al(3+) ions in dilute aqueous solutions have been calculated based on classical molecular dynamics (MD) simulations and quantum-mechanical (QM) calculations. For Li(+)(aq), Ca(2+)(aq), Mg(2+)(aq), and Al(3+)(aq), our calculated IR frequency shifts, Δν(OH), with respect to the gas-phase water frequency, are about -300, -350, -450, and -750?cm(-1), compared to -290, -290, -420, and -830?cm(-1) from experimental infrared (IR) studies. The agreement is thus quite good, except for the order between Li(+) and Ca(2+). Given that the polarizing field from the Ca(2+) ion ought to be larger than that from Li(+)(aq), our calculated result seems reasonable. Also the absolute OH frequencies agree well with experiment. The method we used is a sequential four-step procedure: QM(electronic) to make a force field+MD simulation+QM(electronic) for point-charge-embedded M(n+) (H(2)O)(y) (second?shell) (H(2)O)(z) (third?shell) clusters+QM(vibrational) to yield the OH spectrum. The many-body Ca(2+)-water force-field presented in this paper is new. IR intensity-weighting of the density-of-states frequency distributions was carried out by means of the squared dipole moment derivatives.     

Nickel(II) N‐Benzyl‐N‐methyldithiocarbamato Complexes as Precursors for the Preparation of Graphite Oxidation Accelerators

The nickel(II) N‐benzyl‐N‐methyldithiocarbamato (BzMedtc) complexes [Ni(BzMedtc)(PPh₃)Cl] ( 1 ), [Ni(BzMedtc)(PPh₃)Br] ( 2 ), [Ni(BzMedtc)(PPh₃)I] ( 3 ), and [Ni(BzMedtc)(PPh₃)(NCS)] ( 4 ) were synthesized using the reaction of [Ni(BzMedtc)₂] and [NiX₂(PPh₃)₂] (X = Cl, Br, I and NCS). Subsequently, complex 1 was used for the preparation of [Ni(BzMedtc)(PPh₃)₂]ClO₄ ( 5 ), [Ni(BzMedtc)(PPh₃)₂]BPh₄ ( 6 ), and [Ni(BzMedtc)(PPh₃)₂]PF₆ ( 7 ). The obtained complexes 1 – 7 were characterized by elemental analysis, thermal analysis and spectroscopic methods (IR, UV/Vis, ³¹P{¹H} NMR). The results of the magnetochemical and molar conductivity measurements proved the complexes as diamagnetic non‐electrolytes ( 1 – 4 ) or 1:1 electrolytes ( 5 – 7 ). The molecular structures of 4 and 5· H₂O were determined by a single‐crystal X‐ray analysis. In all cases, the Ni^II atom is tetracoordinated in a distorted square‐planar arrangement with the S₂PX, and S₂P₂ donor set, respectively. The catalytic influence of selected complexes 1 , 3 , 5 , and 6 on graphite oxidation was studied. The results clearly indicated that the presence of the products of thermal degradation processes of the mentioned complexes has impact on the course of graphite oxidation. A decrease in the oxidation start temperatures by about 60–100 °C was observed in the cases of all the tested complexes in comparison with pure graphite.     

Life cycle assessment and sustainability analysis of products, materials and technologies. Toward a scientific framework for sustainability life cycle analysis

There are many approaches to study the environmental and sustainability aspects of production and consumption. Some of these reside at the level of concepts, e.g., industrial ecology, design for environment, and cleaner production. Other approaches are based on the use of quantitative models, e.g., life cycle assessment, material flow accounting and strategic environmental assessment. This paper focuses on the development of a framework that is able to incorporate different models for environmental analysis, with the option of a broader scope that also includes economic and social aspects, thus covering the three pillars of sustainability. This framework builds on the ISO-framework for life cycle assessment, but takes a broader view, and allows us to move from micro questions on specific products, via meso questions on life styles up to macro questions in which the entire societal structure is part of the analysis.     

Antimony-Carbon bond activation in a Pt(II) complex: The crystal structure of [Pt(9S3)(SbPh3)(Ph)](PF6)·CH3NO2

The complex [Pt(9S3)(SbPh₃)(Ph)](PF₆) forms directly from [Pt(9S3)(SbPh₃)₂](PF₆)₂ during the room temperature crystallization of the latter in nitromethane. The crystal structure shows a five-coordinate Pt(II) center containing the tridentate thiacrown ligand, a Sb donor from the triphenylstibine ligand, and a σ-coordinating phenyl group. The phenyl group forms via Sb-C bond cleavage from one of the SbPh₃ ligands in the bis complex.