Regioselective Alkylation of Thiazolylsulfonamides: Direct and Efficient Synthesis of 3‐Alkylthiazolidene Derivatives

Various N‐3‐alkylated thiazolidenesulfonamide derivatives were efficiently prepared by the direct endo‐selective alkylation of thiazolylsulfonamides. The effects of different bases and solvents were investigated, and the NaH–THF combination was found to be the most effective at conferring high yields and endo‐selectivity.     

Nonylphenol Polyethoxylates Degraded by Three Different Wavelengths of UV and Their Genotoxic Change—Detected by Generation of γ‐H2AX

UV rays in sunlight are an important factor in the degradation of chemicals. In this study, we investigated the degradation of nonionic surfactants, nonylphenol polyethoxylates (NPEOs) with 10 or 70 ethylene oxide (EO) units using UVA, B and C, and their genotoxic change based on phosphorylation of histone H2AX (γ‐H2AX), a marker of DNA damage. NPEOs were degraded dependent on the energy of UV, that is, UVC having the highest energy was most effective, whereas UVA having the lowest energy caused little change. The EO side chain of NPEO(70) was broken near the benzene ring by UV, producing NPEOs with a shortened EO chain (around 10 units). The generation of γ‐H2AX reflected the pattern of degradation; shortening of the EO chain changed NPEO(70) into an inducer for γ‐H2AX, and degradation of NPEO(10) attenuated the genotoxicity. The γ‐H2AX generated by NPEO(10) and UV‐degraded NPEO(70) was independent of the cell cycle. The formation of DNA double strand breaks detected by gel electrophoresis was consistent with the results for γ‐H2AX. These results suggested that UV rays can make NPEOs harmless or genotoxic according to the degradation of the EO side chain, the effects being dependent on wavelength.     

Hemin-adsorbed carbon felt for sensitive and rapid flow-amperometric detection of dissolved oxygen

Hemin was physically adsorbed onto porous carbon felt (CF), a microelectrode ensemble of micro-carbon fiber (ca. 7 μm in diameter) and possessing a three-dimensional random structure. The hemin-CF exhibited a well-defined redox wave that is due to Fe(III)/Fe(II) redox process in hemin, with a formal potential of ?0.32 V (vs. Ag/AgCl) in deoxygenated buffer solution of pH 7.0. The surface coverage of the electroactive hemin molecules on the surface of the CF was calculated to be 5.0?×?10^?11 mol cm^?2, and the apparent heterogeneous electron transfer rate constant is 3.35 s^?1. The hemin-CF electrode displays excellent electrocatalytic activity for the reduction of dissolved oxygen (DO), and the magnitude of the cathodic current increases with increasing concentrations of DO in the sample solution. The electrode was used as a flow-through detector for sensitive and rapid consecutive determination of DO. Deoxygenated pH 7.0 solutions were analyzed at a flow rate of 8.0 mL min^?1 at an applied potential of ?0.2 V, and highly reproducible cathodic peak current responses to DO were observed in the 0.72 to 13.3 mg L^?1 concentration range. The maximum throughput is 170 samples h^?1. The hemin-CF-based amperometric flow-sensor was applied to determine the concentration of DO in environmental water samples.

Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene

A three-step synthesis of (R)-7-hydroxycarvone (1), which is anticipated to be a valuable building block for the versatile preparation of natural products, is described. Optimization of the reaction conditions for photooxygenation and migration of (S)-α-pinene 2, tetrapropylammonium perruthenate (TPAP) oxidation of the generated alcohol, and a subsequent ring-opening reaction in the presence of Cu(OTf)₂ led to the synthesis of 1 with good reproducibility. The desired product 1 was thus obtained in 46% yield over three steps.     

A Pd(II)-hydroxyporphycene: synthesis, characterization, and photoinduced proton-coupled electron transfer

A Pd(II) complex, Pd(TPrPc-OH) (1, TPrPc-OH = 9-hydroxy-2,7,12,17-tetrapropylporphycenato dianion), has been synthesized and characterized. ¹H NMR spectroscopy revealed that compound 1 exists as its enol form in solution. The H atom of the hydroxy group in 1 was exchanged with deuterium on addition of ethanol-d ₆. UV–visible spectra showed a red shift of the Q band of 1 in THF compared with that of the acetoxy derivative Pd(TPrPc-OAc) (2, TPrPc-OAc = 9-acetoxy-2,7,12,17-tetrapropylporphycenato dianion). The pK _a value of the hydroxy group in 1 was determined, by means of a UV–visible titration experiment, to be 10.56. A cyclic voltammogram of 1 in a mixture of THF and Britton–Robinson buffered aqueous solution revealed one-electron and one-proton coupled transfer in the oxidation process in the pH range from 2.7 to 10.5, which was identified by pH-varying experiments and the Pourbaix diagram. Transient absorption spectroscopy revealed that an electron-transfer reaction occurred from the triplet excited-state of 1 to 2,3,5,6-tetramethyl-1,4-benzoquinone (duroquinone, DQ) upon pulse laser irradiation at 532 nm. Such an intermolecular photoinduced electron-transfer reaction was not observed between the Ni analog, Ni(TPrPc-OH), and DQ. The reaction rate constant, k _q, was indicative of a kinetic isotope effect with k _q(H)/k _q(D) = 1.7, supporting the belief that the exited-state electron transfer from 1 to DQ is accompanied by proton transfer.     

Radical reaction of chlorophyll derivatives triggered by AIBN

Radical reactions of a C3-vinylated chlorophyll derivative, methyl pyropheophorbide-a, which were induced by thiols and the conventional initiator azobisisobutyronitrile (AIBN) were examined in vitro for the first time. Thiyl radicals attacked regioselectively at the sole C3-vinyl group, and the anti-Markovnikov sulfanyl adducts were obtained as major products. The other peripheral substituents, as well as the chlorin macrocycle, remained intact. The AIBN-induced radical reaction competed with co-oxidation that afforded the C3-formyl chlorin. This method can open new routes to derivatization of vinyl chlorins.     

Enhancement in the rate of conversion of peptide Cys-Pro esters to peptide thioesters by structural modification

We previously reported that the peptide containing a Cys-Pro ester (CPE) moiety is spontaneously transformed into a peptide thioester via an N to S acyl shift followed by diketopiperazine formation. In an attempt to identify more reactive structures for the formation of a peptide thioester, we modified the CPE structure, in which the Pro residue in the CPE moiety was replaced with N-substituted glycine derivatives. These peptides were transformed into a peptide thioester more rapidly. Alternatively, the addition of an amino acid residue at the C-terminus of the CPE moiety also accelerated thioester formation.     

Hyperpolarized 13C Magnetic Resonance Imaging of Fumarate Metabolism by Parahydrogen-induced Polarization: A Proof-of-Concept in vivo Study

Hyperpolarized [1-¹³C]fumarate is a promising magnetic resonance imaging (MRI) biomarker for cellular necrosis, which plays an important role in various disease and cancerous pathological processes. To demonstrate the feasibility of MRI of [1-¹³C]fumarate metabolism using parahydrogen-induced polarization (PHIP), a low-cost alternative to dissolution dynamic nuclear polarization (dDNP), a cost-effective and high-yield synthetic pathway of hydrogenation precursor [1-¹³C]acetylenedicarboxylate (ADC) was developed. The trans-selectivity of the hydrogenation reaction of ADC using a ruthenium-based catalyst was elucidated employing density functional theory (DFT) simulations. A simple PHIP set-up was used to generate hyperpolarized [1-¹³C]fumarate at sufficient ¹³C polarization for ex vivo detection of hyperpolarized ¹³C malate metabolized from fumarate in murine liver tissue homogenates, and in vivo ¹³C MR spectroscopy and imaging in a murine model of acetaminophen-induced hepatitis.     

Interrogation of fiber-Bragg-grating temperature and strain sensors with a temperature-stabilized VCSEL

The interrogation of fiber-Bragg-grating (FBG) sensors using a vertical-cavity surface-emitting laser (VCSEL) is discussed. A long-wavelength (1.54 μm) VCSEL was used as a wavelength-tunable source by variation in the current. Temperature stabilization was performed with a thermoelectric device. Characteristics of temperature and strain sensing were investigated. FBGs with different reflectivities were compared. For temperature sensing, the root-mean-square error in the measurement was reduced to 1/3 that without temperature stabilization. The dependence of the measurement error on the reflectivities of the FBGs was investigated. The measurement error was larger for FBGs with lower reflectivities in both temperature and strain sensing. Improvement on the sensing with low-reflectivity FBGs is discussed.