PtBr2-catalyzed consecutive enyne metathesis-aromatization of 1-(1-methoxy-but-3-enyl)-2-(1-alkynyl)benzenes: dual role of the Pt catalyst

1,7-Enynes 1, connected through an aromatic ring and bearing a leaving methoxy group at the 4-position, underwent the PtBr(2)-catalyzed enyne metathesis followed by aromatization in one pot to afford vinyl naphthalenes 3 in good to acceptable yields. The cyclobutene intermediate 11a and another intermediate 2a were isolated, indicating that PtBr(2) acts as a dual role catalyst: (1) as a transition metal catalyst, it induces the enyne metathesis to produce 11a starting from 1a, and (2) as a Lewis acid catalyst, it facilitates elimination of MeOH from 2a to give the aromatized product 3a.     

New organosols of nickel sulfides,palladium sulfides,manganese sulfide,and mixed metal sulfides and their use in preparation of semiconducting polymer-metal sulfide composites

Organosols of NiS, PdS, and MnS in N,N-dimethylformamide were prepared by reaction of the metal acetate with H₂S. Organosols of mixed-metal sulfides (Zn _x Cd_1–x S, Hg _x Cd_1–x S, Hg _x Cu_1–x S, Cd _x Mn_1–x S, Hg _x Mn_1–x S, Hg _x Cd_1–x S, and Mn _x Zn_1–x S) were similarly obtained by reaction of mixtures of the metal salts with H₂S. The organosol of Zn_0.5Cd_0.5S contained particle with two particle size distributions centered at 6.5 nm and 29 nm, as revealed by Ar laser-scattering analysis. The metal sulfides are recovered by addition of Et₂O to the organosols. Zn _x Cd_1–x S thus obtained shows magnetic susceptibility in the range 0.5×10^–6–2.3×10^–6 emug^–1 depending on thex value. Addition of polymers to the organosols affords semiconducting films of metal sulfide-polymer composites.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

Elucidation of solid-state complexation in ground mixtures of cholic acid and guest compounds

The solid-state complexation between cholic acid (CA) and either methyl p-hydroxybenzoate (MPB) or ibuprofen (IBP) was investigated. Powder X-ray diffractometry, IR spectroscopy and thermal analysis suggested the complex formation between CA and MPB as well as between CA and IBP by co-grinding method. The stoichiometry of CA-MPB was 1 : 1 while that of CA-IBP was 2 : 1, reflecting the effect of guest size on complex formation. The guest compounds were assumed to be included in the channel of complexes formed by hydrogen bonds among CA molecules.     

Classical trajectory calculations of intramolecular vibrational energy redistribution. I. Methanol-water complex

Intramolecular vibrational energy redistributions of the O-H stretching (nuOH) vibration for the methanol monomer and its water complex, the methanol-water dimer, are investigated by using ab initio full-dimensional classical trajectory calculations. For the methanol monomer, in the high-energy regime of the 5nuOH overtone, the time dependence of the normal-mode energies indicates that energy flowed from the initial excited O-H stretching mode to the C-H stretching mode. This result confirms the experimental observation of energy redistribution between the O-H and C-H stretching vibrations [L. Lubich et al., Faraday Discuss. 102, 167 (1995)]. Furthermore, a lot of dynamical information in the time domain is contained in the power spectra, whose density is given by the Fourier transformation of the total momentum obtained from trajectory calculations. For the methanol-water hydrogen-bonded complex, at the high-energy level of the 5nuOH overtone, the calculated power spectrum shows considerable splitting and broadening, indicating significant energy redistribution through strong coupling between the O-H stretching vibration and other vibrations. It is thus clear that the A-H...B hydrogen-bond formation facilitates energy redistribution subsequent to the vibrational excitation of the hydrogen-bonded A-H stretching mode.     

Some partially fluorinated cyclic and acyclic compounds of sulphur (II) and (IV) and partially fluorinated cyclic compounds of phosphorus (III) and (V)

Sulfinyl fluoride and N-(F-isoprophyl)iminosulfur difluoride form the compounds, O$\text{SN(CH}{}_3\text{)CH}{}_2\text{CH}{}_2\text{N}$(CH₃) and i-C₃F₇N$\text{SN(CH}{}_3\text{CH}{}_2\text{CH}{}_2\text{N}$(CH₃ with symdimethylethylenediamine (1). In contrast, CF₃C(O)NSF₂ and (R_f)₂SF₂ (R_f = CF₃, i-C₃F₇ form only acyclic compounds, CF₃C(O)N(CH₃)CH₂CH₂N(CH₃)C(O)CF₃ and R_fSN(CH₃)CH₂CH₂N(CH₃)SR_f with (1). With PF₃, PF₅ and OPF₃, cyclic compounds $\text{N(CH}{}_3\text{)CH}{}_2\text{CH}{}_2\text{N(CH}{}_3\text{)P}$F, $\text{N(CH}{}_3\text{)CH}{}_2\text{CH}{}_2\text{N(CH}{}_3\text{)P}$F₃, and $\text{N(CH}{}_3\text{)CH}{}_2\text{CH}{}_2\text{N(CH}{}_3\text{)P}$-(O)F result. When the latter two compounds are reacted further with LiNC(CF₃)₂, N(CH₃)CH₂CH₂N(CH₃)PF₂NC(CF₃)₂ and $\text{N(CH}{}_3\text{CH}{}_2\text{CH}{}_2\text{N(CH}{}_3\text{)P}$(O)NC(CF₃)₂) form.     

Cu(I) catalyst in DMF: an efficient catalytic system for the synthesis of furans from 2-(1-alkynyl)-2-alken-1-ones

The cyclization of 2-(1-alkynyl)-2-alken-1-ones 1 proceeded very smoothly in the presence of alcohols 2 with a catalytic amount of Cu(I)Br in DMF at 80 degrees C, leading to the formation of highly substituted furans 3. The catalytic system reported herein is easy to handle, compared to the previously known system wherein the reaction between 1 and 2 needed to use moisture sensitive gold(III) chloride.     

Stereoselective syntheses of 4-hydroxy 4-substituted glutamic acids

The 4-hydroxy 4-substituted glutamic acid moiety is a common substructure of biologically important natural products such as monatin [(2S,4S)-2], lycoperdic acid (3), and dysiherbaine (4). To develop methodology for syntheses of these natural products, cycloadditions of nitrone 5 with 2-substituted 2-propen-1-ols 6 and 2-substituted acrylates 8 were investigated. Reactions of nitrone 5 with alcohols 6 in the presence of MgBr2OEt2 gave cycloadducts 7 in a highly stereoselective manner, whereas noncatalyzed reactions of 5 with acrylates 8 afforded adducts 9. Using the former reaction, syntheses of monatin [(2S,4S)-2], monatin derivative 18, and lycoperdic acid (3) were accomplished. The C4-epimer of monatin [(2S,4R)-2)] was also synthesized by employing the latter cycloaddition.     

A novel thin-layer amperometric detector based on chemically modified ring-disc electrode and its application for simultaneous measurements of nitric oxide and nitrite in rat brain combined with in vivo microdialysis

A novel thin-layer amperometric detector (TLAD) based on chemically modified ring-disc electrode and its application for simultaneous measurements of nitric oxide (NO) and nitrite (NO₂⁻) in rat brain were demonstrated in this work. The ring-disc electrode was simultaneously sensitive to nitric oxide (NO) and nitrite (NO₂⁻) by modifying its inner disc with electropolymerized film of cobalt(II) tetraaminophthalocyanine (polyCoTAPc)/Nafion and its outer ring with poly(vinylpyridine) (PVP), respectively. The ring-disc electrode was used to constitute a novel TLAD in radial flow cell for simultaneous measurements of NO and NO₂⁻ in rat brain combined with techniques of high performance liquid chromatography (HPLC) and in vivo microdialysis. It was found that the basal concentration of NO in the caudate nucleus of rat brain is lower than 1.0×10⁻⁷ mol l⁻¹, NO₂⁻ concentration is 5.0×10⁻⁷ mol l⁻¹ and NO exists in brain maybe mainly in the form of its decomposed product.