High-brightness 138-W green laser based on an intracavity-frequency-doubled diode-side-pumped Q-switched Nd:YAG laser

Green power of 138 W was generated at an estimated beam quality of M(2) = 11 by intracavity frequency doubling of a diode-pumped Nd:YAG laser. The laser employs a diffusive close-coupled diode-pumping design and a bifocusing-compensation resonator design to ensure stable operation.     

Highly refractive polymer resin derived from sulfur‐containing aromatic acrylate

New sulfur‐containing polymers with high‐refractive indices and low birefringences have been developed as UV‐curable high‐refractive polymer resins. The polymers derived from 2,7‐bis[(2‐acryloylethyl)sulfanyl]thianthrene (2,7‐BAST) and 4,4′‐bis[(acryloyloxyethylthio)diphenylsulfide (4,4′‐BADS) were prepared by photopolymerization under UV irradiation. Transparent UV‐cured films were obtained in both cases. Both polymers showed good thermal stability, such as a 5% weight‐loss temperature at 355 °C under nitrogen and glass transition temperatures (T_g) in the range of 94–143 °C. They also showed high‐refractive indices of 1.6531 and 1.6645 at 632.8 nm and low birefringences of 0.0039 and 0.0069 in addition to high transparency in the visible region. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2604–2609, 2010     

Direct patterning of poly(amic acid) and low‐temperature imidization using a crosslinker,a photoacid generator,and a thermobase generator

A positive‐type photosensitive polyimide (PSPI) based on poly(amic acid) (PAA), a crosslinker 1,1,1‐tris{4‐[2‐(vinyloxy)ethoxy]phenyl}ethane (TVPE), a photoacid generator (PAG) (5‐propylsulfonyloxyimino‐5H‐thiophen‐2‐ylidene)‐2‐(methylphenyl)acetonitrile (PTMA), and a thermobase generator (TBG) t‐butyl 2,6‐dimethylpiperidine‐1‐carboxylate (BDPC) has been developed as a promising material in microelectronics. The PAA was prepared from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐oxydianiline (ODA) in dimethyl sulfoxide (DMSO). The PSPI, consisting of PAA (69 wt %), TPVE (21 wt %), PTMA (3 wt %), and BDPC (7 wt %), showed high sensitivity of 21 mJ/cm² and a high contrast of 6.8 when it was exposed to a 436‐nm line (g‐line), postbaked at 90 °C for 5 min, and developed with 1.69 wt % TMAHaq. A clear positive image of 8 μm line and space pattern was printed on film, which was exposed to 50 mJ/cm² of g‐line by a contact printing mode and fully converted to the corresponding polyimide (PI) pattern on heating at 200 °C, confirmed by FTIR spectroscopy. Thus, this system will be a good candidate for next generation PSPIs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3362–3369, 2009     

Effect of controlling optical wavelength by spectacle lenses on visual quality

Optical Review - In this study, the effects of selectively yellow-cut lenses on contrast sensitivity were investigated in healthy young and middle-aged individuals and elderly patients with...     

Experimental investigation on reversal of secondary Bjerknes force between two bubbles in ultrasonic standing wave

The direction of the secondary Bjerknes force between a free bubble and an attached bubble was experimentally investigated. The behavior of the two bubbles in an ultrasonic standing wave of 27 kHz was observed using an imaging system with a high-speed video camera. It was demonstrated experimentally that the direction of the force reversed at a specific separation distance between the two bubbles, which was defined as the threshold distance. The threshold distance changed with the radius of the attached bubble. In addition, a theoretical calculation was performed using a previously derived model that coupled the vibrations of two free bubbles [Ida, Phys. Lett. A 297, 210-217 (2002)]. The experiment data for the threshold distance qualitatively agreed with the theoretical predictions, except when the separation distance was very small. Then, it was discovered that the free bubble became trapped near the attached bubble when the separation distance between the two bubbles was very small. This indicated that a stable equilibrium point for the separation distance exists that cannot be predicted by the theoretical model.     

Effects of the acceptor conjugation length and composition on the electrical memory characteristics of random copolyimides

Resistive‐switching memories based on copolyimides (coPIs), PI‐NTCDIX and PI‐BTCDIX , with different compositions of 4,4′‐diamino‐4″‐methyltriphenylamine ( AMTPA ), 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, and N,N′‐bis‐(4‐aminophenyl)‐1,8:4,5‐naphthalenetetracarboxydiimide ( NTCDI ) or N,N′‐bis‐(4‐aminophenyl)‐1,2:4,5‐benzenetetracarboxydiimide ( BTCDI ) have been developed. By varying the feed ratio of monomers, PI‐NTCDIX and PI‐BTCDIX showed tunable optical and electronic properties through the charge transfer (CT) between AMTPA and NTCDI or BTCDI . The memory devices based on PI‐NTCDIX exhibited the tunable electrical bistability from the volatile dynamic random access memory to nonvolatile write once read many memory characteristics as the NTCDI composition increased. The OFF/ON electrical switching transition was mainly attributed to the CT mechanism for the charge separated high conductance, based on the analysis of model compounds and density functional theory calculation. Also, the volatility of the memory device depended on the stability of CT complex. The long conjugation and high electron affinity of the NTCDI moiety stabilized the radical anion generated in the CT complex and prevented the recombination of segregated radical species even through applying the high positive or negative voltage. On the other hand, the memory devices based on PI‐BTCDIX showed a rather unique behavior compared with those based on PI‐NTCDIX . At the low BTCDI composition, the device exhibited volatile memory property. However, no switching behavior was observed at the high BTCDI composition due to the low highest occupied molecular orbital energy level of BTCDI . Combining these results and our previous study on perylenebisimide ( PBI ), we concluded that memory characteristics could be tailored by changing the conjugation length ( PBI > NTCDI > BTCDI ) and the acceptor composition in random coPIs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013