Preparation of Polylactide Microspheres Having Positively or Negatively Charged Surfaces

The syntheses of polylactides (PLAs) with branched peptide end groups containing reactive (ionic) moieties such as amino or carboxyl groups are described and were used to prepare PLA‐based microspheres (MSs) with positively or negatively charged surfaces. Branched peptides with hydroxyl end groups and four protected amino or carboxyl groups, Boc₄‐K₃‐OH or Bn₄‐E₃‐OH, were synthesized, and the hydroxyl group converted to an alkoxide and was used as the initiation site for the ring‐opening polymerization of L ‐lactide. Subsequent deprotection gave PLAs end‐capped with branched peptides having four amino or carboxyl groups, respectively (K₃‐PLA and E₃‐PLA). K₃‐PLA and E₃‐PLA were converted to K₃⁴⁺‐PLA and E₃^4?‐PLA by acid or base treatment, respectively. MSs with charged surfaces were then prepared using K₃⁴⁺‐PLA or E₃^4?‐PLA as a surfactant [MS(K₃⁴⁺‐PLA) or MS(E₃^4?‐PLA)]. The ionic surface state of the MSs was confirmed by colloidal titration and zeta potential analysis.

SEM image of MSs: MS(K₃⁴⁺‐PLA).     

Real-time imaging of radioisotope labeled compounds in a living plant

We developed a quantitative, real-time imaging system of labeled compounds in a living plant. The system was composed of CsI scintillator to convert β-rays to visible light and an image intensifier unit (composed of GaAsP semiconductor and MCP; micro channel plate) to detect extremely weak light. When the sensitivity and resolution of the image of our system was compared with that of an imaging plate (IP), the sensitivity of our system (with 20 minutes) was higher than that of an IP, with similar quality to that of an IP. Using this system, the translocation of ³²P in a soybean plant tissue was shown in successive images. Shared first authors.     

Ice/Salt-Assisted Synthesis of Ultrathin Two-Dimensional Micro/Mesoporous Iron and Nitrogen Co-Doped Carbon as an Efficient Electrocatalyst for Oxygen Reduction

An ice/salt-assisted strategy has been developed to achieve the green and efficient synthesis of ultrathin two-dimensional (2D) micro/mesoporous carbon nanosheets (CNS) with the dominant active moieties of Fe−N₄ (Fe-N-CNS) as high-performance electrocatalysts for the oxygen reduction reaction (ORR). The strategy involves freeze-drying a mixture of iron porphyrin and KCl salt using ice as template followed by a confined pyrolysis with KCl as an independent sealed nanoreactor to facilitate the formation of 2D carbon nanosheets, N incorporation, and porosity creation. The well-defined assembly of ultrathin 2D carbon nanosheets ensures high utilization of D1 and D3 Fe−N₄ active sites, and effectively promotes the mass transport of ORR reactants by virtue of the pronounced mesoporous structure. The resulting Fe-N-CNS electrocatalyst was shown to exhibit superior ORR activity, better electrochemical durability, and methanol tolerance towards ORR in alkaline electrolyte relative to the commercial Pt/C electrocatalyst.     

Improved synthetic routes to methylene-bridged P-chiral diphosphine ligands via secondary phosphine–boranes

Improved methods for the preparation of methylene-bridged diphosphine ligands are described. Both enantiomers of the key intermediate tert-butylmethylphosphine–borane were prepared via resolution or by the conversion of one enantiomer into the opposite enantiomer. The precursor borane complexes of bis(tert-butylmethylphosphino)methane (t-Bu-MiniPHOS), bis((1,1,3,3-tetramethylbutyl)methylphosphino)methane (t-Oct-MiniPHOS), and (tert-butylmethylphosphino)(di-tert-butylphosphino)methane (trichickenfootphos) were prepared in good yields and enantiopure form.     

Transition-metal-free controlled polymerization for poly(p-aryleneethynylene)s

A transition-metal-free controlled polymerization for the attainment of poly(p-aryleneethynylene)s is developed. The polymerization of 1-pentafluorophenyl-4-[(trimethylsilyl)ethynyl]benzene with a catalytic amount of fluoride anions proceeds in a chain-growth-like manner to afford polymers with controlled molecular weights and low polydispersity indexes. The mechanism involves a pentacoordinated fluorosilicate as a key intermediate. The anionic “living” nature of this process is applied to block copolymerization and also surface-terminated polymerization.     

Synthesis and spectral properties of polymethine-cyanine dye-nitroxide radical hybrid compounds for use as fluorescence probes to monitor reducing species and radicals

Various hybrid compounds comprised of two types of nitroxide radicals and either a pentamethine (Cy5) or trimethine cyanine (Cy3) were synthesized. The nitroxide radicals were linked either via an ester-bond to one or two N-alkyl carboxyl-terminated groups of Cy5, or via two amido-bonds (aminocarbonyl or carbonylamino group) to the 5-position of the indolenine moieties of Cy5 and Cy3. Changes in fluorescence and ESR intensities of the hybrid compounds were measured before and after addition of Na ascorbate in PBS (pH 7.0) to reduce the radicals. Among the hybrid compounds synthesized, those that linked the nitroxide radicals via an aminocarbonyl residue at the 5-position of the indolenine moieties on Cy5 and Cy3 exhibited a 1.8- and 5.1-fold increase in fluorescence intensity with the reduction of the nitroxide segment by the addition of Na ascorbate, respectively. In contrast, fluorescence intensity was not enhanced in the other hybrid compounds. Thus, the hybrid compounds which exhibited an increase in fluorescent intensity with radical reduction can be used in the quantitative measurement of reducing species such as Fe(2+) and ascorbic acid, and hydroxyl radicals. Because these hybrid compounds have the advantage of fluorescing at longer wavelengths-661 (Cy5) or 568 (Cy3)nm, respectively, they can be used to measure radical-reducing species or radicals either in solution or in vivo.     

Topographic, electrochemical, and optical images captured using standing approach mode scanning electrochemical/optical microscopy

We developed a high-resolution scanning electrochemical microscope (SECM) for the characterization of various biological materials. Electrode probes were fabricated by Ti/Pt sputtering followed by parylene C-vapor deposition polymerization on the pulled optical fiber or glass capillary. The effective electrode radius estimated from the cyclic voltammogram of ferrocyanide was found to be 35 nm. The optical aperture size was less than 170 nm, which was confirmed from the cross section of the near-field scanning optical microscope (NSOM) image of the quantum dot (QD) particles with diameters in the range of 10-15 nm. The feedback mechanism controlling the probe-sample distance was improved by vertically moving the probe by 0.1-3 microm to reduce the damage to the samples. This feedback mode, defined as "standing approach (STA) mode" (Yamada, H.; Fukumoto, H.; Yokoyama, T.; Koike, T. Anal. Chem. 2005, 77, 1785-1790), has allowed the simultaneous electrochemical and topographic imaging of the axons and cell body of a single PC12 cell under physiological conditions for the first time. STA-mode feedback imaging functions better than tip-sample regulation by the conventionally available AFM. For example, polystyrene beads (diameter approximately 6 microm) was imaged using the STA-mode SECM, whereas imaging was not possible using a conventional AFM instrument.     

Adsorption and aggregation properties of heterogemini surfactants containing a quaternary ammonium salt and a sugar moiety

A novel heterogemini surfactant comprising two hydrocarbon chains and two different hydrophilic groups such as a quaternary ammonium cation and gluconamide nonion N,N-dimethyl-N-[2-(N'-alkyl-N'-gluconamide)ethyl]-1-alkylammonium bromides (2CnAmGlu, where n represents hydrocarbon chain lengths of 8, 10, 12, and 14) was synthesized by reacting N,N-dimethylethylenediamine with alkyl bromide, followed by a reaction with 1,5-D(+)-gluconolactone. The adsorption properties of 2CnAmGlu were characterized by surface tension measurements made using the Wilhelmy plate method, and their aggregation properties were investigated by dynamic light scattering and cryogenic transmission electron microscopy techniques. The relationship between the hydrocarbon chain length and the logarithm of the critical micelle concentration (cmc) for 2CnAmGlu exhibited a linear decrease when the chain length was increased up to 12 and then a departure from linearity at n=14. The surface tension reached 24-26 mN m-1 at each cmc, indicating high efficiency in lowering the surface tension of water. Furthermore, it was found that the structure of the aggregate formed for 2CnAmGlu in solution was influenced by the hydrocarbon chain length; that is, for n=10 and 12, micelles with a hydrodynamic radius of 2-5 nm were formed, whereas vesicles were also observed for n=14.     

Adsolubilization of 2-naphthol into adsorbed layer of PEO-PPO-PEO triblock copolymers on hydrophilic silica

Adsolubilization of 2-naphthol into an adsorbed layer of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers (Pluronics) on hydrophilic silica has been investigated. Four kinds of Pluronics (P103, P105, P123, and F108) were used in order to understand the effect of the hydrophobicity of surfactant on the adsolubilization. The order of the adsorption in the saturation level was found to be P123 approximately P103 > P105 > F108, meaning that Pluronics with higher hydrophobicity can adsorb preferentially to the silica surface. Indeed, this order was parallel to the order of the adsolubilization amount of 2-naphthol. In the case of co-addition of the Pluronics and 2-naphthol, the adsolubilization amount increased gradually at lower surfactant concentration regions, reached a maximum, and then decreased with increasing concentration of the Pluronics. The maximum amount appeared at critical polymolecular micelle concentration of each Pluronics. On the other hand, the final decrement was not observed when 2-naphthol was added after replacement of the Pluronics supernatant by the Pluronics free solution. These results suggest that adsolubilization behavior is influenced by the existence of the polymolecular micellar aggregates in the solution phase.