Interaction forces between poly(amidoamine) (PAMAM) dendrimers adsorbed on gold surfaces

Interaction forces between two gold surfaces with adsorbed poly(amidoamine) (PAMAM) dendrimers (generations G3.0 and G5.0) have been investigated using colloidal probe atomic force microscopy (AFM). In the absence of dendrimers or at their low concentrations, an attractive force derived from the van der Waals interaction was observed. On the other hand, this attractive interaction changed to repulsion with increasing dendrimer concentration. The origin of the repulsion can be attributed to either an electric double layer interaction or a steric effect of the adsorbed dendrimers, depending on the concentration of dendrimer. The steric hindrance was also influenced by the generation of the dendrimer; the force-detectable distance in the presence of PAMAM G5.0 dendrimer was slightly longer than that in the presence of G3.0 dendrimer. In order to estimate the occupied area of each dendrimer adsorbed on gold, quartz crystal microbalance (QCM) measurement was also carried out.     

Efficient construction of biaryls and macrocyclic cyclophanes via electron-transfer oxidation of Lipshutz cuprates

An efficient method for the homocoupling of aryl halides by electron-transfer oxidation of Lipshutz cuprates (Ar2Cu(CN)Li2) with organic electron acceptors is disclosed. Thus, various types of Lipshutz cuprates are prepared by successive treatment of aryl or heteroaryl bromides with tert-butyllithium and CuCN. The electron-transfer oxidation of Lipshutz cuprates with p-benzoquinones proceeds smoothly to afford the corresponding homocoupling products in moderate to good yields. Furthermore, it can be applied to the construction of either thiophene- or benzene-fused 10-membered ring cyclophanes. For the synthesis of 10-membered cyclophanes, the linear C-Cu-C structure of Lipshutz cuprates should be maintained in the dimetallacyclic intermediates, producing the large ring cyclophanes efficiently. The X-ray analysis of the cyclophanes reveals that the difference in the bridging atoms results in the different conformations of the macrocyclic rings. Thus, the silicon-bridged cyclophane 5a adopts a D2-symmetric structure with a twisted rhombic arrangement of four thiophene rings, whereas the methylene- and oxygen-bridged cyclophanes 5b and 5c possess C2h- and C2-symmetric structures with chair- and boatlike conformations, respectively. The 1H NMR spectrum of C2-symmetric 5c is temperature-dependent, and the activation energy (DeltaG) for the conformational change is 10.1 kcal/mol.     

Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells

Establishing the 3D microscale organization of cells has numerous practical applications, such as in determining cell fate (e.g., proliferation, migration, differentiation, and apoptosis) and in making functional tissue constructs. One approach to spatially pattern cells is by dielectrophoresis (DEP). DEP has characteristics that are important for cell manipulation, such as high accuracy, speed, scalability, and the ability to handle both adherent and non-adherent cells. However, widespread application of this method is largely restricted because there is a limited number of suitable hydrogels for cell encapsulation. To date, polyethylene glycol-diacrylate (PEG-DA) and agarose have been used extensively for dielectric patterning of cells. In this study, we propose gelatin methacrylate (GelMA) as a promising hydrogel for use in cell dielectropatterning because of its biocompatibility and low viscosity. Compared to PEG hydrogels, GelMA hydrogels showed superior performance when making cell patterns for myoblast (C2C12) and endothelial (HUVEC) cells as well as in maintaining cell viability and growth. We also developed a simple and robust protocol for co-culture of these cells. Combined application of the GelMA hydrogels and the DEP technique is suitable for creating highly complex microscale tissues with important applications in fundamental cell biology and regenerative medicine in a rapid, accurate, and scalable manner.     

Star-shaped trimeric quaternary ammonium bromide surfactants: adsorption and aggregation properties

Novel star-shaped trimeric surfactants consisting of three quaternary ammonium surfactants linked to a tris(2-aminoethyl)amine core were synthesized. Each ammonium had two methyls and a straight alkyl chain of 8, 10, 12, or 14 carbons. The adsorption and aggregation properties of these tris(N-alkyl-N,N-dimethyl-2-ammoniumethyl)amine bromides (3C(n)trisQ, in which n represents alkyl chain carbon number) were characterized by equilibrium and dynamic surface tension, rheology, small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) techniques. 3C(n)trisQ showed critical micelle concentrations (CMC) 1 order of magnitude lower than that of the corresponding gemini surfactants with an ethylene spacer and the corresponding monomeric surfactants. The logarithm of the CMC decreased linearly with increasing hydrocarbon chain length for 3C(n)trisQ. The slope of the line, which is well-known as Klevens equation, was larger than those of the monomeric and gemini surfactants; however, considering the total carbon number in the chains, the slope was shallower than the monomeric and was close to the gemini. Through the results such as surface tensions at the CMC (32-34 mN m(-1)) and the parameters of standard free energy, CMC/C(20) and pC(20), it was found that 3C(n)trisQ could adsorb densely at the air/water interface despite the strong electrostatic repulsion between multiple quaternary ammonium headgroups. Moreover, dynamic surface tension measurements showed that the kinetics of adsorption for 3C(n)trisQ to the air/water interface was slow because of their bulky structures. Furthermore, the results of rheology, SANS, and cryo-TEM determined that 3C(n)trisQ with n = 10 and 12 formed ellipsoidal micelles at low concentrations in solution and the structures transformed to threadlike micelles with very few branches for n = 12 as the concentration increased, but for n = 14 threadlike micelles formed at relatively low concentrations.     

Self-assembling porphyrins and phthalocyanines for photoinduced charge separation and charge transport

Large π-conjugated compounds are promising building blocks for organic thin-film electronics such as organic light-emitting diodes, organic field-effect transistors, and organic photovoltaics. Utilization of porphyrins and phthalocyanines for this purpose is highly fascinating because of their excellent electric, photophysical, and electrochemical properties as well as intense self-assembling abilities arising from π-π stacking interactions. This paper focuses on fundamental aspects of self-assembled structures that have been obtained from porphyrin and phthalocyanine building blocks and more complex composites for photoinduced charge separation and charge transport toward the potential applications to organic thin-film electronics.     

Synthesis and evaluation of biodegradable copolyesters of octadecane-1,18-dicarboxylic acid and poly(ε-caprolactone) diol

Copolyesters of poly(ε-caprolactone) diol and 1,18-octadecane dicarboxylic acid were synthesized by polyaddition. The copolymers have a "mixed" structure of ’polyester-polyethylene’. Characterization was carried out by using ¹H and ¹³C NMR, FT-IR, viscosities, DSC, and GPC. The tensile strength varied from 11.9 to 19.9 MPa, and elongation at break varied from 370 to 660 %, respectively. Biodegradability was evaluated by enzymatic hydrolysis (lipases from Rhizopus arrhizus and Candida cylindracea and an esterase form hog liver) and by soil burial test. Both tests showed that the copolyesters were characterized by enhanced biodegradability.     

Magnetooptical Property of Sodium Borosilicate Gel-Glass Containing Bi-YIG Fine Particles

Composite materials which consist of ferro- or ferrimagnetic fine particles in a glass matrix are expected to have a large residual magnetization and coercive force because of their fine magnetic domain structure, and has potential for superior magneto-optical properties compared with single or polycrystalline materials. In this study, the sodium borosilicate (NBS) glass containing Bi-substituted yttrium iron garnet (Bi _x Y_3–x Fe₅O₁₂: BiYIG) fine particles, which show a superior magneto-optical effect, was prepared by the sol-gel method. BiYIG fine particles were stable in NBS gel-glass matrix during densification because the sintering temperature (580°C) of NBS gel was low enough to avoid pyrolysis of BiYIG and the reaction between BiYIG fine particles and the matrix. The Faraday rotation angle spectrum of the composite after deducting the contribution of the NBS glass matrix was intermediate between the reported ones of YIG and Bi_0.25YIG polycrystalline thin films. The change of the Faraday rotation angles of the composite with imposing magnetic field showed a hysteresis loop. It was in good agreement with that of the magnetization curve of the composite.     

Novel Wormlike Nanostructures Self‐Assembled in a Well Defined Liquid Crystalline Diblock Copolymer with Azobenzene Moieties

Novel wormlike nanostructures were self‐assembled in bulk films of a well defined diblock copolymer with azobenzene moieties, which was prepared by atom transfer radical polymerization (ATRP). For comparison, a homopolymer with almost the same repeat units of azobenzene as those in the copolymer was also prepared. They both had well defined structures and exhibited a smectic liquid crystalline phase. Upon annealing the copolymer films, poly(methyl methacrylate) formed a matrix with excellent optical properties, and the azobenzene segment in the minority phase self‐assembled into a wormlike mesogenic domain in the bulk films. Such block copolymer films exhibited stability and transparency by eliminating the scattering of visible light, indicating their potential application as photoresponsive functional materials. Although wormlike morphologies have been obtained in micelles from block copolymer solutions, to the best of our knowledge, such wormlike nanostructures have never been explored in bulk films.