Measurement of the rate coefficient for collisional removal of O2(X3Sigma- g, upsilon=1) by O(3P)

We report a laboratory measurement of the rate coefficient for the collisional removal of O(2)(X(3)Sigma(g) (-),upsilon=1) by O((3)P) atoms. In the experiments, 266-nm laser light photodissociates ozone in a mixture of molecular oxygen and ozone. The photolysis step produces vibrationally excited O(2)(a(1)Delta(g)) that is rapidly converted to O(2)(X(3)Sigma(g) (-),upsilon=1-3) in a near-resonant electronic energy-transfer process with ground-state O(2). In parallel, a large amount of O((1)D) atoms is generated that promptly relaxes to O((3)P). Under the conditions of the experiments, only collisions with the photolytically produced O((3)P) atoms control the lifetime of O(2)(X(3)Sigma(g) (-),upsilon=1), because its removal by molecular oxygen at room temperature is extremely slow. Tunable 193-nm laser light monitors the temporal evolution of the O(2)(X(3)Sigma(g) (-),upsilon=1) population by detection of laser-induced fluorescence near 360 nm. The removal rate coefficient for O(2)(X(3)Sigma(g) (-),upsilon=1) by O((3)P) atoms is (3.2+/-1.0)x10(-12) cm(3) s(-1) (2sigma) at a temperature of 315+/-15 K (2sigma). This result is essential for the analysis and correct interpretation of the 6.3-mum H(2)O(nu(2)) band emission in the Earth's mesosphere and indicates that the deactivation of O(2)(X (3)Sigma(g) (-),upsilon=1) by O((3)P) atoms is significantly faster than the nominal values recently used in atmospheric models.     

Viscoelastic measurements of single molecules on a millisecond time scale by magnetically driven oscillation of an atomic force microscope cantilever

The dynamical nature of biomolecular systems means that knowledge of their viscoelastic behavior is important in fully understanding function. The linear viscoelastic response can be derived from an analysis of Brownian motion. However, this is a slow measurement and technically demanding for many molecular systems of interest. To address this issue, we have developed a simple method for measuring the full linear viscoelastic response of single molecules based on magnetically driven oscillations of an atomic force microscope cantilever. The cantilever oscillation frequency is periodically swept through the system resonance in less than 200 ms allowing the power spectrum to be obtained rapidly and analyzed with a suitable model. The technique has been evaluated using dextran, a polysaccharide commonly used as a test system for single molecule mechanical manipulation experiments. The monomer stiffness and friction constants were compared with those derived from other methods. Excellent agreement is obtained indicating that the new method accurately and, most importantly, rapidly provides the viscoelastic response of a single molecule between the tip and substrate. The method will be a useful tool for studying systems that change their structure and dynamic response on a time scale of 100-200 ms, such as protein folding and unfolding under applied force.     

From cyclopentanone oximes to bis[1,2,3]dithiazolo-s-indacenes, cyclopenta[c][1,2]thiazine, pentathiepino-, tetrathiino-, and thienocyclopenta[1,2,3]dithiazoles as a rich source of new materials

[Structure: see text]. The 1,5- and 1,7-s-hydrindacenedione dioximes reacted with S2Cl2 and iBu3N to give the first examples of bis[1,2,3]dithiazolo-s-indacenes; one of them was a near-infrared dye. In contrast, the silylated bicyclo[3.3.0]octan-2,6-dione dioxime reacted with S2Cl2 and Et3N to give a bicyclic 4-cyanoethylcyclopenta[1,2,3]dithiazole or, after addition of Li2S, a tricyclic 4-cyanoethyl-5,6-pentathiepinocyclopenta[1,2,3]dithiazole, also obtained from 2-cyanoethylcyclopentanone oxime, S2Cl2, and Hünig's base. In related reactions, 2-oxocyclopentylpropionate oxime gave the expected cyclopenta[1,2,3]dithiazole, in addition to an unexpected cyclopenta[c][1,2]thiazine that showed a reversible reduction wave in its CV at -0.95 V. Ethyl 2-oxocyclopentanecarboxylate oxime reacted with S2Cl2, Hünig's base, and Li2S to give a 5,6-tetrathiinocyclopenta[1,2,3]dithiazole derivative. Cyclopentathiophen-4-one oximes reacted with S2Cl2 and iBu3N to give thienocyclopenta[1,2,3]dithiazoles that showed UV-vis spectral bands that depended on the positions of the ring fusion.     

Yield of I(2Psol:12) in the photodissociation of CH2I2

The production of I(²P_{$\text{1}\text{2}$}) in the photolysis of CH₂I₂ has been studied optoacoustically at excitation wavelengths between 365.5 and 247.5 nm. Bands found at 32200 and 47000 cm^?1 correlate with I(²P_{$\text{3}\text{2}$}) whilst those at 34700 and 40100 cm^?1, which correlate with I(²P_{$\text{1}\text{2}$}), give final ²P_{$\text{3}\text{2}$}/²P_{$\text{1}\text{2}$} ratios of 1.75 and 1.1, respectively, after curve crossing.     

The complete characterization of a rhodium Lewis acid-dipolarophile complex as an intermediate for the enantioselective catalytic 1,3-dipolar cycloaddition of C,N-diphenylnitrone to methacrolein

The 1,3-dipolar cycloaddition reaction of C,N-diphenylnitrone with methacrolein is efficiently catalyzed by the rhodium diphosphine compound (SRh,RC)-[(eta5-C5Me5)Rh(R-Prophos)(H2O)](SbF6)2 [R-Prophos = (R)-(+)-1,2-bis(diphenylphosphino)-propane, 1.SbF6]; the asymmetric catalytic process occurs with reversal of regioselectivity, perfect endo selectivity, and up to 92% ee. The complete (NMR and X-ray analysis) characterization of the involved intermediate (SRh,RC)-[(eta5-C5Me5)Rh(R-Prophos)(methacrolein)](SbF6)2 (7.SbF6) allows us to interpret the observed selectivity.     

Metal effect on the supramolecular structure, photophysics, and acid-base character of trinuclear pyrazolato coinage metal complexes

Varying the coinage metal in cyclic trinuclear pyrazolate complexes is found to significantly affect the solid-state packing, photophysics, and acid-base properties. The three isoleptic compounds used in this study are [[3,5-(CF3)2Pz]M]3 with M = Cu, Ag, and Au (i.e., Cu3, Ag3, and Au3, respectively). They form isomorphous crystals and exist as trimers featuring nine-membered M3N6 rings with linear two-coordinate metal sites. On the basis of the M-N distances, the covalent radii of two-coordinate Cu(I), Ag(I), and Au(I) were estimated as 1.11, 1.34, and 1.25 angstroms, respectively. The cyclic [[3,5-(CF3)2Pz]M]3 complexes pack as infinite chains of trimers with a greater number of pairwise intertrimer M...M interactions upon proceeding to heavier coinage metals. However, the intertrimer distances are conspicuously short in Ag3 (3.204 angstroms) versus Au3 (3.885 angstroms) or Cu3 (3.813 angstroms) despite the significantly larger covalent radius of Ag(I). Remarkable luminescence properties are found for the three M3 complexes, as manifested by the appearance of multiple unstructured phosphorescence bands whose colors and lifetimes change qualitatively upon varying the coinage metal and temperature. The multiple emissions are assigned to different phosphorescent excimeric states that exhibit enhanced M...M bonding relative to the ground state. The startling luminescence thermochromic changes in crystals of each compound are related to relaxation between the different phosphorescent excimers. The trend in the lowest energy phosphorescence band follows the relative triplet energy of the three M(I) atomic ions. DFT calculations indicate that [[3,5-(R)2Pz]M]3 trimers with R = H or Me are bases with the relative basicity order Ag < Cu < Au while fluorination (R = CF3) renders even the Au trimer acidic. These predictions were substantiated experimentally by the isolation of the first acid-base adduct, [[Au3]2:toluene]infinity, in which a trinuclear Au(I) complex acts as an acid.     

New Fischer carbene complexes of rhodium(i): preparation and 2-cyclopentenone ring synthesis by annelation to alkynes

A new type of metal carbene complexes of group 9, specifically a cationic Fischer carbene of rhodium(I), has been synthesized from chromium carbene complexes via double transfer of carbene and CO ligands. These complexes reveal a different reactivity than other transition metal carbenes, including their chromium precursors, toward neutral and electron-poor alkynes, giving selectively polysubstituted cyclopentenones.     

Mechanism of the oxidation of sulfides by dioxiranes: conformational mobility and transannular interaction in the oxidation of thianthrene 5-oxide

The detailed study of the oxidation of thianthrene 5-oxide (1) with methyl(trifluoromethyl)dioxirane (5b) in different solvents and in the presence of (18)O isotopic tracers is reported. Thianthrene 5-oxide (1) is a flexible molecule in solution, and this property allows for transannular interaction of the sulfoxide group with the expected zwitterionic 7 and hypervalent 10-S-4 sulfurane 9 intermediates formed in the oxidation and biases the course of the reaction toward the monooxygenation pathway.     

Determination of potential degradation products of piroxicam by HPTLC densiometry and HPLC

Summary HPTLC densitometry and HPLC are considered for the simultaneous determination of the degradation products of piroxicam (2-aminopyridine, DP-I and DP-II). The substances were separated on silica gel with fluorescence indicator in ethylacetate — toluene — diethylamine (10∶10∶5) and toluene — absolute ethanol — glacial acetic acid (8∶1.2∶0.5) systems. The measuring absorbance (detection of reflectance) of the separated substances was carried out “in situ” at 296 nm using 4-level calibration (external standard, nonlinear regresson function) in the concentration range 600–1200 ng 2-aminopyridine/spot and 300–600 ng DP-I and DP-II/spot. The HPLC method was carried out using RP-8 stationary phase and methanol + phosphate-citrate buffer, pH 3 mobile phase with addition of sodium pentanesulfonate (40+60, v/v). 2-aminopyridine wass detected at 300 nm, DP-I at 280 nm and DP-II at 248 nm. The concentration range for 2-aminopyridine is 2–40 μg/ml, for DP-I and DP-II 2–20 μg/ml (for an injection volume of 10 μl). The results were evaluated by linear regression analysis.     

Alkane/Alcohol mixed monolayers at the solid/liquid interface

In this work, we present the behavior of solid monolayers of binary mixtures of alkanes and alcohols adsorbed on the surface of graphite from their liquid mixtures. We demonstrate that solid monolayers form for all the combinations investigated here. Differential scanning calorimetry (DSC) is used to identify the surface phase behavior of these mixtures, and elastic neutron incoherent scattering has been used to determine the composition of the mixed monolayers inferred by the calorimetry. The mixing behavior of the alcohol/alkane monolayer mixtures is compared quantitatively with alkane/alkane and alcohol/alcohol mixtures using a regular solution approach to model the incomplete mixing in the solid monolayer with preferential adsorption determining the surface composition. This analysis indicates the preferential adsorption of alcohols over alkanes of comparable alkyl chain length and even preferential adsorption of shorter alcohols over longer alkanes, which contrasts strongly with mixtures of alkane/alkane and alcohol/alcohol of different alkyl chain lengths where the longer homologue is always found to preferentially adsorb over the shorter. The alcohol/alkane mixtures are all found to phase separate to a significant extent in the adsorbed layer mixtures even when molecules are of a similar size. Again, this contrasts strongly with alkane/alkane and alcohol/alcohol mixtures where, although phase separation is found for molecules of significantly different size, good mixing is found for similar size species.