Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Synthesis and structural, electronic, and optical properties of oligo(thienylfuran)s in comparison with oligothiophenes and oligofurans

[structure: see text] Alternate thiophene/furan oligomers having four and six heterocycles, i.e., oligo(thienylfuran) dimer and trimer 2 (n = 4 and 6), were newly synthesized by repetitive Stille coupling reactions. The structural, electronic, and optical properties of these oligomers were investigated by X-ray crystallography (for n = 4), cyclic voltammetry (CV), UV-vis and fluorescence spectroscopy, and DFT calculations, and the results were compared with those of corresponding oligothiophenes (1) and oligofurans (3). The inter-ring torsional energy profiles calculated for bithiophene 1 (n = 2), thienylfuran 2 (n = 2), and bifuran 3 (n = 2) at the B3LYP/6-31G(d) level indicated that the most stable conformers of 2 (n = 2) and 3 (n = 2) are fully coplanar with transoid structure while that of 1 (n = 2) is twisted with a dihedral angle of 158 degrees . In accord with this, X-ray crystallographic analysis of 2 (n = 4) revealed that the pi-conjugated system is nearly planar with the inter-ring C=C-C=C dihedral angles between the thiophene and furan rings of 173.6(7) degrees , -177.0(7) degrees , and 172.6(6) degrees . In the packing structure, these nearly planar molecules are arranged in a herringbone pattern. The CV on a series of oligo(thienylfuran)s 2 showed irreversible oxidation peaks at +0.90, +0.42, and +0.29 V vs Fc/Fc(+) for n = 2, 4, and 6, which were 0.15-0.18 V lower than those for corresponding oligothiophenes 1 and were closer to those for oligofurans 3. On the other hand, the UV-vis spectra of 2 showed the longest wavelength absorption to be almost identical with those of the corresponding 1, and more bathochromically shifted than those of the corresponding 3. The results of CV and UV-vis measurements were supported by DFT calculations (B3LYP/ 6-311+G(2d,p)//B3LYP/6-31G(d)). Thus, oligo(thienylfuran)s 2 have HOMOs which are higher than those of oligothiophenes 1 and close to those of 3, and HOMO-LUMO gaps which are close to those of 1 and smaller than those of 3. In fluorescence spectra, the quantum yield of 2 increased with elongation of the pi-system (n = 2 (3.5%), 4 (19%), 6 (24%)).     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Preparation and Optical Properties of Gold-Dispersed BaTiO3, PGO (Pb5Ge3O11) and PLT (Pb1-1.5xLaxTiO3) Thin Films by Sol-Gel Process

Gold-dispersed BaTiO₃, PGO and PLT thin films, which will be used for third-order nonlinear optical devices, were prepared by sol-gel process with spin-coating using HAuCl₄4H₂O, Ba(CH₃COO)₂, Ti[O(CH₂)₃CH₃]₄, Pb(CH₃COO)₂3H₂O, Ge[O-n-C₄H₉]₄, La(CH₃COO)₃1.5 H₂O as starting materials. The thin films were heat-treated in air at temperatures ranging from 400 to 800 for 1 h. The nonlinear optical property of these thin films was measured by the degenerate four-wave mixing (DFWM) method using a frequency-doubled Nd: YAG laser with 20 ps pulse duration. Third-order nonlinear susceptibility χ⁽³⁾ of gold-dispersed BaTiO₃, PGO and PLT thin films with 5 vol% of gold were 1.410⁻⁶ esu, 3.510⁻⁷ esu respectively. The large χ⁽³⁾ may be ascribed to the high dielectric constant of the films.     

A characteristic CH band in VCD of methyl glycosidic carbohydrates

Novel vibrational circular dichroism (VCD) studies in the CH region of a series of methyl glycosidic carbohydrates were examined. The specific CH stretching VCD band predicts absolute stereochemistries of their anomeric positions. The C-1 chiral information was extracted to the methoxy substituent as a probe. The concept of the vibrational chirality probe from a single chiral center in the presence of numerous such centers might be useful in determining the absolute configuration, when a multiplicity of chiral centers is present in a molecule such as a carbohydrate.     

The reactions of benzofuroxan with carbonyl compounds on the surface of solid catalysts

The cyclocondensations of benzofuroxan 1a with carbonyl compounds were smoothly and efficiently carried out by the adsorption of the components on the surface of silica gel or a molecular sieve to form a 2,3-disubstituted quinoxaline 1,4-dioxide. When the reactions using a molecular sieve 3A (powder) were carried out at 90°, the actual reaction times were reduced to 0.5-2 hours. Although Duerckheimer has reported the isolation of only the 7-substituted quinoxaline 1,4-dioxide when 5-methoxybenzofuroxan 1e was allowed to react with ethyl acetoacetate 2j , it produced only the 6-methoxy isomer as the reaction product by our method. 5-Carboxybenzofuroxan 1f did not react with the carbonyl compound.     

Site-specific cleavage of glycated human serum albumin in the presence of iron.

Nonenzymatically glycated human serum albumin was incubated with ferric ion at 37 degrees C in 0.2 M phosphate buffer, pH 7.4, up to 30 days. In the incubation mixture, amino acids, tyrosine and phenylalanine, were detected, suggesting site specific cleavage of glycated human serum albumin.     

Epitaxial Growth of Sr x Ba1 − x Nb2O6 Thin Films Prepared from Sol-Gel Process

In this study, we prepared Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO₃ (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO₃ (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO₃ were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr _x Ba_{1 – x} Nb₂O₆ and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr _x Ba_{1 – x} Nb₂O₆ thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO₃ (110) single crystal substrate.     

Effect of pressure on the solubility of naphthalene in water at 25°C

Solubility of naphthalene in water was measured at 25°C and pressures up to 200 MPa. The solubility decreased with increasing pressure. From the pressure coefficient of the solubility, the volume change V accompanying the dissolution was estimated as 13.8±0.4 cm ³ -mol ^–1 . Further we estimated the volume change V _CH accompanying hydrophobic hydration as –0.1±0.6 cm ³ -mol ^–1 using the V value, the molar volume of crystalline naphthalene, and the partial molar volume of naphthalene in n-heptane. This V _CH is much larger (i.e., less negative) than that for hydrophobic hydration of alkyl-chain compounds and suggests that the hydration structure of naphthalene differs from that of alkyl-chain compounds.