A Divergent Polyene Cyclization for the Total Synthesis of Greenwayodendrines,Greenwaylactams, Polysin and Polyveoline

We present a concise asymmetric total synthesis (5–8 steps) of nine sesquiterpenoid alkaloids featuring four different tetra-/pentacyclic scaffolds. To this end, a novel, bioinspired indole N-terminated cationic tricyclization has been developed, enabling the divergent synthesis of greenwayodendrines and polysin. Subtle variation of the C2-substituted indole cyclization precursor allowed switching between indole N- and C-termination. For the latter, a subsequent Witkop oxidation enabled conversion of the cyclopentene-fused indole into the eight-membered benzolactam to directly furnish the family of greenwaylactams. In addition, a diastereomeric C-termination product has been elaborated to provide access to polyveoline.     

Analysis of size-classified fine and ultrafine particulate matter on substrates with laser-induced breakdown spectroscopy

Airborne particulate matter in the fine (0.1 µm–2.5 µm) and ultrafine (≤ 0.1 µm) size range is supposed to affect human health significantly. Smaller particles intrude more deeply into the lungs, so that an organism directly absorbs toxic compounds. Therefore, knowledge of the size-dependent composition of airborne particles is required to determine their health hazard. In this paper, we demonstrate the application of laser-induced breakdown spectroscopy to directly analyze size-classified particulate matter samples without any sample preparation. Samples analyzed are collected on filter substrates using a cascade impactor. Greased aluminum foils are used as filter substrate. To reduce ablation of the substrate material, low pulse energies of 0.6 mJ are used for plasma excitation. The plasma light is observed using an Echelle spectrometer. The effect of ambient gas and pressure on the line intensities is studied. Calibration samples for 14 elements relevant for human health were produced, and the system was calibrated for concentration ranges up to four orders of magnitude. Finally, the collected samples of particulate originating from steel-making processes were analyzed. The measurements show that the composition of these particles depends strongly on their size. For example, the elements lead, cadmium and copper are enriched within particles of about 200 nm diameter.     

Microsurface potential measurements: repulsive forces between polyelectrolyte brushes in the presence of multivalent counterions

We propose a new way to determine weak repulsive forces operative between colloidal particles by measuring the rate of slow coagulation. The rate of slow coagulation is directly related to the competition of the repulsion with thermal motion. Since the thermal forces are weak, measurements of the coagulation rate can lead to precise information on repulsive potentials having a magnitude of just a few kT. We demonstrate this novel way by studying colloidal spherical polyelectrolyte brush (SPB) particles in aqueous solution containing trivalent La3+ counterions. The particles consist of a monodisperse polystyrene core of 121 nm radius from which linear sodium poly(styrenesulfonate) (PSS) chains are densely grafted (contour length 48 nm). We determine the rate of coagulation by time-resolved simultaneous static and dynamic light scattering in the presence of LaCl3 (0.2 to 150 mM). Direct measurements of the repulsive force between macroscopic brush layers demonstrate that the potential is decaying exponentially with distance. This is in good agreement with a simple theoretical treatment that furthermore leads to the effective surface potential Psi0. The good agreement of data obtained by the novel microscopic method with direct macroscopic measurements underscores the general validity of our approach.     

Correlation between the molecular structure and photoresponse in aliphatic self-assembled monolayers with azobenzene tailgroups

We have compared the structural and photoisomerization properties of self-assembled monolayers (SAMs) comprising either the trans or cis isomers of azobenzene terminated dithiolane with in-chain amide unit, viz., 4-(phenyldiazenyl)phenyl-4-(1,2-dithiolane-3-yl)-butylcarboxamide ( 1). These films were prepared on Au(111) from solutions of both isomers. Structure and composition of the SAMs were studied by X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy. The photoresponse of the films was monitored in real time by ellipsometry. SAMs fabricated from the trans isomer were found to be densely packed and highly ordered. These films did not show any discernible photoresponse upon irradiation with UV light, which, under favorable conditions, triggers the trans- cis isomerization. In contrast, films prepared from solutions containing predominantly the cis isomer were loosely packed and mostly disordered but exhibited reversible photoreactivity. The results confirm that steric effects, i.e., available free volume, play a dominant role for the photoresponse of aliphatic SAMs bearing the photoactive azobenzene group. The crystal structure of 1 ( trans isomer) exhibits a row-like aggregation of neighboring molecules by weak hydrogen bonds and can be taken as a model for the arrangement of 1 in the monolayer films. Further, in addition to the surface coordination behavior, we have also mimicked the chemisorption of the 1,2-dithiolane moiety onto the gold substrate in molecular coordination chemistry in oxidative addition reactions with the zero-valent platinum complex [Pt(PPh 3) 4].     

Nucleophilic additions to alkylidene bis(sulfoxides): stereoelectronic effects in vinyl sulfoxides

Conjugate additions of nucleophiles (e.g. enolates, amines and malonate anions) to bis(p-tolylsulfinyl)alkenes, alkylidene-1,3-dithiane-1,3-dioxides and alkylidene-1,3-dithiolane-1,3-dioxides have recently been published. Reasons for different selectivities and reaction rates will be discussed by consideration of steric and electronic effects. The preferred mode of attack can be explained by stereoelectronic effects (hyperconjugation) in the primarily carbanion, which is stabilized by n-->S-O-sigma* interaction with an antiperiplanar S=O group. Calculation of the transition states [BP86/aug-TZVP] for the addition of acetone enolate to the dithiane-derived alkylidene bis(sulfoxide) revealed that 6.6-7.3 kJ mol(-1) more energy is needed for an attack leading to a less-stabilized carbanion. Two axial S=O groups in dithiolane-derived alkylidene bis(sulfoxides) lead to a higher reactivity towards nucleophiles.     

omega-(Bis(trifluoromethyl)amino)alkane-1-sulfonates: synthesis and mass spectrometric study of the biotransformation products

In search of fluorinated functional groups which could undergo defluorination, and therefore be included in novel non-polluting fluorinated surfactants, omega-(bis(trifluoromethyl)amino)alkane-1-sulfonates (BTFMA-AS) with a homologue distribution from seven to thirteen methylene groups were synthesized and investigated for aerobic biodegradation applying both a standardized test and a fixed-bed bioreactor (FBBR). These compounds were prepared as part of a screening study for potentially mineralizable fluorinated endgroups.Application of hybrid triple quadrupole-linear ion trap mass spectrometry (QqQ(LIT)-MS) coupled to high-performance liquid chromatography (HPLC) allowed the tracking of primary degradation as well as the detection and structural elucidation of biotransformation intermediates. An understanding of the fragmentation pathway of the test compounds allowed selective precursor ion scans to reveal the presence of stable fluorinated metabolites. Structures were confirmed by enhanced product ion scans and MS(3) scans in the linear ion trap mode.The primary biodegradation rate and the extent of biodegradation were found to be chain-length dependent, with higher homologues being completely primarily degraded within 10 days. For the first time, two simultaneous metabolic pathways for substituted linear alkane-1-sulfonates were discovered: Desulfonation, oxidation to a carboxylic acid and subsequent chain-length shortening by beta-oxidation dominated the metabolism. This pathway resulted in the formation of 3-(bis(trifluoromethyl)amino)propionic acid and bis(trifluoromethyl)aminoacetic acid, which showed recalcitrance in this experiment. Oxidation of the alkyl chain to the respective carbonyl derivative represents the minor pathway. Only the long-chain homologues of these oxidized species were partially degraded; the short-chain homologues were not attacked.     

Solid-state NMR spectroscopy applied to a chimeric potassium channel in lipid bilayers

We show that solid-state NMR can be used to investigate the structure and dynamics of a chimeric potassium channel, KcsA-Kv1.3, in lipid bilayers. Sequential resonance assignments were obtained using a combination of (15)N- (13)C and (13)C- (13)C correlation experiments conducted on fully labeled and reverse-labeled as well as C-terminally truncated samples. Comparison of our results with those from X-ray crystallography and solution-state NMR in micelles on the closely related KcsA K (+) channel provides insight into the mechanism of ion channel selectivity and underlines the important role of the lipid environment for membrane protein structure and function.     

Catalytic use of indium(0) for carbon-carbon bond transformations in water: general catalytic allylations of ketones with allylboronates

We have discovered the unprecedented catalytic use of In(0) for catalytic C-C bond transformations. Remarkably, these general catalytic allylations of ketones proceeded smoothly in water as a sole solvent under mild conditions, and water proved to be essential for these reactions. Both the displayed substrate scope and the functional group tolerance were excellent. Importantly, the In metal catalyst could be easily recovered and reused without loss of catalytic activity. Moreover, when an alpha-substituted allylboronate was used, an unusual constitutional selectivity was observed providing exclusively the formal alpha-adduct. Additionally, the resulting tertiary homoallylic alcohols were obtained with exceptionally high diastereoselectivities. The applicability of this concept to asymmetric catalysis in water by using In(0) combined with a chiral bis(oxazoline) ligand was demonstrated as well.     

Quantitative analysis by microchip capillary electrophoresis: current limitations and problem-solving strategies

Obstacles and possible solutions for the application of microchip capillary electrophoresis in quantitative analysis are described and critically discussed. Differences between the phenomena occurring during conventional capillary electrophoresis and microchip-based capillary electrophoresis are pointed out, with particular focus on electrolysis, bubble formation, clogging, surface interactions, injection and aspects related to the power supply. Current drawbacks are specified and improvements for successful quantitative microchip capillary electrophoresis are suggested.     

Strong intra- and intermolecular aurophilic interactions in a new series of brilliantly luminescent dinuclear cationic and neutral au(I) benzimidazolethiolate complexes

The structural and photophysical properties of a new series of cationic and neutral Au(I) dinuclear compounds (1 and 2, respectively) bridged by bis(diphenylphosphino)methane (dppm) and substituted benzimidazolethiolate (X-BIT) ligands, where X = H (a), Me (b), OMe (c), and Cl (d), have been studied. Monocationic complexes, [A(u2)(micro-X-BIT)(micro-dppm)](CF(3)CO(2)), were prepared by the reaction of [A(u2)(micro-dppm)](CF(3)CO(2))(2) with 1 equiv of X-BIT in excellent yields. The cations 1a-1d possess similar molecular structures, each with a linear coordination geometry around the Au(I) nuclei, as well as relatively short intramolecular Au(I)...Au(I) separations ranging between 2.88907(6) A for 1d and 2.90607(16) A for 1a indicative of strong aurophilic interactions. The cations are violet luminescent in CH(2)Cl(2) solution with a lambda(em)(max) of ca. 365 nm, assigned as ligand-based or metal-centered (MC) transitions. Three of the cationic complexes, 1a, 1b, and 1d, exhibit unusual luminescence tribochromism in the solid-state, in which the photoemission is shifted significantly to higher energy upon gentle grinding of microcrystalline samples with DeltaE = 1130 cm(-1) for 1a, 670 cm(-1) (1b), and 870 cm(-1) (1d). The neutral dinuclear complexes, [A(u2)(micro-X-BIT)(micro-dppm)] (2a-2d) were formed in good yields by the treatment of a CH(2)Cl(2) solution of cationic compounds (1) with NEt(3). 2a-2d aggregate to form dimers having substantial intra- and intermolecular aurophilic interactions with unsupported Au(I)...Au(I) intermolecular distances in the range of 2.8793(4)-2.9822(8) A, compared with intramolecular bridge-supported separations of 2.8597(3)-2.9162(3) A. 2a-2d exhibit brilliant luminescence in the solid-state and in DMSO solution with red-shifted lambda(em)(max) energies in the range of 485-545 nm that are dependent on X-BIT and assigned as ligand-to-metal-metal charge transfer (LMMCT) states based in part on the extended Au...Au...Au...Au interactions.