Precise chelatometric titrations of zinc, cadmium, and lead with molecular spectroscopy.

Spectral data during a chelatometric titration were utilized for determining an equivalence point of the titration. Three-dimensional titration data were analyzed by fitting to a theoretical equation that was derived from equilibrium equations among a metal ion, an indicator and EDTA. The equation with optimized parameters successfully explained the three-dimensional titration data. This method was applied to EDTA titration systems of zinc, cadmium and lead with xylenol orange (XO) as an indicator. These systems were analyzed while taking the formation of 1:1 and 2:1 metal-indicator complexes into account. By this method, an accurate equivalence point was determined as well as stability constants and molar absorption spectra of metal-indicator complexes in each titration system. Moreover, the comparability among the concentrations of the metal standard solutions prepared from pure metals (Zn, Pb, and Cd) was also confirmed by the proposed evaluation method.     

A simple and sensitive analytical method for the determination of antimony in environmental and biological samples.

The results of a study and application of leucocrystal violet for the determination of antimony in parts per million levels is described here. The proposed method is based on the reaction of antimony(III) with acidified potassium iodate to liberate iodine. The liberated iodine selectively oxidizes leucocrystal violet to crystal violet dye. The formed dye shows maximum absorbance at 590 nm. The color system obeys Beer's law in the concentration range from 0.4 - 3.6 microg antimony per 25 ml of final solution. The molar absorptivity and Sandell's sensitivity were found to be 7.32 x 10(5) l mol(-1) cm(-1) and 0.0016 microg cm(-2), respectively. All variables were studied in order to optimize the reaction. The proposed method is satisfactorily applicable for the analysis of antimony in various environmental and biological samples. The method is simple, highly sensitive, accurate and reliable.     

Spectrophotometric determination of thiourea in microgram quantities

Summary Copper(II) forms a stable colourless complex with thiourea. This property has been utilized to develop a Spectrophotometric method for the determination ofg quantities of thiourea. The complex absorbs in ultraviolet region and the determinations are carried out at 250 nm. The method permits the determination of thiourea from 10–60g with error not exceeding ± 1.0%.

---

Zusammenfassung Kupfer(II) bildet mit Thioharnstoff eine farblosa Komplexverbindung, die sich auf Grund ihrer Absorption bei 250 nm zur spektrophotometrischen Bestimmung von Mikrogrammengen Thioharnstoff eignet. 10 bis 60g Thioharnstoff lassen sieh mit einem Fehler von höchstens ± 1,0% bestimmen.

     

Thermal characterization of bismaleimide blends

4,4-bismaleimidophenyl methane (BM) and 3,3-bismaleimidophenyl sulfone (BS) were blended in solution using weight ratios 31 (MS31), 21 (MS21), 11 (MS11), 12 (MS12) and 13 (MS13). Chain extended bismaleimide resins were also prepared by treating BS/BM with 4,4-diaminodiphenyl ether in molar ratios of 10.3 (BM-E and BS-E resins). These resins were also blended with bismaleimides and the curing characteristics were evaluated by differential scanning calorimetry. Increase in BM content in BMBS blends or increase in chain extended bismaleimide content in BM-EBS or BS-E BM blends resulted in a reduction of melting and curing temperatures. Indication about the extent of cross-linking was obtained from solubility measurements (in DMF) of isothermally cured resins (180 °C, lh and 220 °C, lh in an air oven). Thermogravimetric analysis of samples isothermally cured at 180 °C and 220 °C (lh each) was carried out in nitrogen atmosphere. Improvement in thermal stability of chain extended bismaleimides was observed on blending.

---

Zusammenfassung 4,4-Bismalimidophenyl-methan (BM) und 3,3-Bismalimidophenyl-sulfon (BS) wurden in Lösung in den Gewichtsverhältnissen 31 (MS31), 21 (MS21), 11 (MS11), 12 (MS12) und 13 (MS13) gemischt. Auch kettenpolymerisierten Bismalimid-Harze wurden durch Behandlung von BS/BM mit Diaminodiphenylether im Molverhältnis 10,3 dargestellt (BM-E- und BS-E-Harze). Die Kennwerte der Aushärtung von Mischungen dieser Harze mit den Bismalimiden wurden mittels DSC ermittelt. Eine Erhöhung des BM-Gehaltes in den BM BS-Mischungen oder des Gehaltes der BM-E BS oder BS-E-Mischungen an kettenpolymerisierten Bismalimiden führt zu einer Erniedrigung der Schmelz- und Aushärtetemperaturen. Hinweise über den Vernetzungsgrad wurden aus Löslichkeitsmessungen (in DMF) von Isotherm (je 1 Stunde bei 180 und 220 °C in Luft) gehärteten Harzen erhalten. Die thermogravimetrische Analyse der Isotherm bei 180 bzw. 220 °C 1 Stunde ausgehärteten Proben wurde in Stickstoffatmosphäre ausgeführt. Die thermische Stabilität der Bismalimide wird durch Verschneiden verbessert.

---

4,4-- () 3,3-- () 31 (MC 31), 21 (MC 21), 11 (MC 11), 12 (MC 12) 13 (MC13). - / 4,4- 10,3 ( - C-). - . - - - - , . ( 1 180 220°) . . - .

---

---

The financial assistance provided by Department of Science and Technology is gratefully acknowledged.     

Microdetermination of carbonyl compounds by reduction with alkaline sodium borohydride

Summary Alkaline sodium borohydride has been employed as a reducing reagent for the titrimetric determination of compounds containing the carbonyl function. The sample is dissolved in methanol and is then reduced with alkaline sodium borohydride. After completion of the reaction, the excess sodium borohydride is back titrated against standardized hydrochloric acid solution using methyl red as indicator. The stoichiometry between the carbonyl function and sodium borohydride is 41.

---

Zusammenfassung Natriumborhydrid dient als Reduktionsmittel zur Titration von Carbonylverbindungen. Die Probe wird in Methanol gelöst und dann mit alkalischem Natriumborhydrid reduziert. Nach Ablauf der Reaktion wird der Überschuß mit Salzsäure gegen Methylrot zurücktitriert. Carbonylverbindung und Natriumborhydrid reagieren im Verhältnis 41.

     

Nano-iron oxide-encapsulated chitosan microspheres as novel adsorbent for removal of Ni (II) ions from aqueous solution

The present study investigates the utility of composite beads of nano-particles of iron oxide and chitosan for removing Ni (II) ions from aqueous solution by batch and column adsorption techniques. In the batch mode experiment, the influence of pH, concentration, adsorbent dose, temperature, column mode, bed height, flow rate and initial concentration were studied on the adsorption profiles of nickel ions. The maximum uptake of Ni (II) ions was obtained at pH 4.0 in 30 min at room temperature.     

Unprecedented Transformation of Thioglycosides to Their Corresponding 1‐O‐Acetates in the Presence of HClO4‐SiO2 §

An unprecedented conversion of thioalkyl/aryl glycoside to the corresponding 1‐O‐acetates has been described using acetic anhydride and HClO₄‐SiO₂ at rt. Although this transformation does not play an important role in the oligosaccharide synthesis in comparison to its reverse transformation, this gives useful information in selecting the reaction condition for the synthesis of oligosaccharides. The yields were excellent in all cases.     

Shielded suspended dielectric guide

The dispersion characteristics of a shielded suspended dielectric are computed using mode matching technique. From the dispersion characteristics the dielectric and conductor loss, quality factor and wave impedances are derived. The dimensions of shielded suspended dielectric are same as that of a rectangular metallic wave guide at K_a band.     

Luminescence and ESR Studies of CaS：Dy Phosphor

CaS phosphor activated with Dy ions is prepared by the solid-state diffusion method. The phosphor is characterized by x-ray powder diffraction, thermogravimetric analysis and photoiuminescence. Defect centres formed in CaS：Dy are studied using the technique of electron spin resonance. The thermoluminescence glow curve shows peaks at around 117℃ and 345℃. Irradiated CaS：Dy exhibits ESR lines due to defect centres. The thermal annealing behaviour of one of the defect centres appears to correlate with the TL peaks at 117℃ and 345℃. This centre is characterized by an isotropic g-value of 2.0035 and is assigned to an F^＋ centre.