Photocatalysis effect of nanometer TiO2 and TiO2-coated ceramic plate on Hepatitis B virus

The photocatalysis effect of nanometer TiO2 particles and TiO2-coated ceramic plate on Hepatitis B virus surface antigen (HBsAg) was investigated. The ELISA (enzyme-linked immunosorbent assay) standard method was used to assess the efficiency of TiO2 material to destroy the HBsAg. The research has shown that the suspension of TiO2 (0.5g/L) can destroy most of the HBsAg under the irradiation of mercury lamp, with the light intensity of 0.6mW/cm(2) at 365nm wavelength, or under the sunlight irradiation for a few hours. TiO2-coated ceramic plates can also destroy the HBsAg under the irradiation of mercury lamp, with the light intensity of 0.05mW/cm(2) at 365nm wavelength or under the room daylight for a few hours.     

Formation and characterization of the tetranuclear scandium nitride: Sc4N4

The scandium dimer reacts with dinitrogen in solid argon to form the previously characterized planar cyclic Sc(mu-N)2Sc molecule, with the N-N bond being completely cleaved. The cyclic Sc(mu-N)2Sc molecules dimerize on annealing to form a cubic Sc4N4 cluster with tetrahedral symmetry, which is a fundamental building block for ScN nanoparticles and crystals.     

Infrared spectra of chlorinated ethylene cations: C2Cl4+, C2HCl3+, 1,1-C2H2Cl2+, and trans-C2H2Cl2+ in solid argon

Infrared spectra of chlorinated ethylene cations: C2Cl4+, C2HCl3+, 1,1-C2H2Cl2+, and trans-C2H2Cl2+ isolated in solid argon are presented. These cations were produced by co-deposition of chlorinated ethylene/Ar mixtures with high-frequency-discharged Ar at 4 K. Photosensitive absorptions are assigned to different vibrational modes of the cations on the basis of observed chlorine isotopic shifts and quantum chemical frequency calculations. With the removal of one electron from the HOMO of chlorinated ethylene neutrals that is C=C bonding and C-Cl antibonding in character, the observed C-Cl stretching vibrational frequencies of the cations are blue-shifted relative to those of the chlorinated ethylene neutrals. The results also show that the cations can be regarded as "isolated" with the vibrational frequencies only slightly shifted when compared to the available gas-phase values.     

From molecule to bulk material: optical properties of hydrogen-bonded dimers [C12H12N4O2AgPF6]2 and [C28H28N6O3AgPF6]2 depend on the arrangement of the oxime moieties

The dependence of the optical properties of [C(12)H(12)N(4)O(2)AgPF(6)](2) (dimer-1) and [C(28)H(28)N(6)O(3)AgPF(6)](2) (dimer-2) on the arrangement of the oxime moieties in the molecule and in bulk crystals was investigated by means of time-dependent density functional theory. Dimer-1 with simple pyridine oxime ligands and a wavy arrangement has a smaller dipole moment and larger transition energy between the two states, and thus smaller third-order polarizabilities and two-photon absorption cross sections. Dimer-2 with extended pyridine oxime ligands and a ladder arrangement has a larger dipole moment and smaller transition energy between the two states, and thus larger third-order polarizabilities and two-photon absorption cross sections. The lowest energy absorption band is red-shifted for dimer-2 as compared with dimer-1, due to more pronounced pi-pi delocalization interactions and weaker hydrogen bonding in dimer-2. The electronic absorption spectra, frequency-dependent third-order polarizabilities, and two-photon absorption cross sections involve significant contributions from charge transfers from pi/pi* orbitals of the pyridine oxime ligands but no contribution from PF(6) (-) ions or H(2)O molecules in the wavelength range studied for the monomers and dimers of the C(12)H(12)N(4)O(2)AgPF(6) and C(28)H(28)N(6)O(3)AgPF(6) molecules. The third-order susceptibilities and two-photon absorption coefficients of bulk solids were estimated on the basis of the optical properties of the corresponding dimers, and the bulk material constructed from dimer-2 has the larger optical parameters of the two.     

Shape- and phase-controlled synthesis of monodisperse, single-crystalline ternary chalcogenide colloids through a convenient solution synthesis strategy

Colloidal, monodisperse, single-crystalline pyramidal CuInS2 and rectangular AgInS2 nanocrystals were successfully synthesized through a convenient and improved solvothermal process that uses hexadecylamine as a capping reagent. The crystal phase, morphology, crystal lattice, and chemical composition of the as-prepared products were characterized by using X-ray diffraction, transmission electron microscopy (TEM), high-resolution TEM, and energy dispersive X-ray spectroscopy. Results revealed that the as-synthesized CuInS2 colloid is in the tetragonal phase (size: 13-17 nm) and the AgInS2 in the orthorhombic structure (size: 17+/-0.5 nm). A possible shape evolution and crystal growth mechanism has been suggested for the formation of pyramidal CuInS2 and rectangular AgInS2 colloids. Control experiments indicated that the morphology- and/or phase-change of CuInS2 and orthorhombic AgInS2 colloids are temperature- and/or time-dependent. CuInS2 colloids absorb well in the range of visible light at room-temperature, indicating its potential application as a solar absorber. Two photoluminescence (PL) subbands at 1.938 and 2.384 eV in the PL spectra of CuInS2 colloids revealed that the recombination of the closest and the second closest donor-acceptor pairs within the CuInS2 lattice, in which the donor defect (Cui) occupies an interstitial position and the acceptor defect (VIn) resides at an adjacent cation site. In addition, the synthesis strategy developed in this study is convenient and inexpensive, and could also be used as a general process for the synthesis of other pure or doped ternary chalcogenides that require a controlled size (or shape). This process could be extended to the synthesis of other functional nanomaterials.     

Simultaneous determination of malachite green, gentian violet and their leuco-metabolites in aquatic products by high-performance liquid chromatography-linear ion trap mass spectrometry

A method has been developed for the simultaneous determination of malachite green, gentian violet and their leuco-metabolites in various aquatic products using isotope dilution liquid chromatography-linear ion trap mass spectrometry without post-column oxidation. Sample was extracted with McIlvaine buffer and acetonitrile, followed by partitioning with dichloromethane, purified on basic alumina and OASIS MCX SPE column, and finally analyzed by LC-ESI-MS/MS with the select reaction monitoring (SRM) mode. Decision limits (CCalpha, alpha=0.01) and detection capability (CCbeta, beta=0.05) of the method were in the range of 0.02-0.09 and 0.04-0.13microg/kg for MG, GV, LMG and LGV in grass carp, eel, salmon, shrimp and shellfish, respectively, recoveries of MG, GV, LMG and LGV at all fortification levels (0.25-10microg/kg) were from 80.8% to 115.7%, inter-day relative standard derivations were from 1.9% to 18.4%. This method appeared suitable for the control of MG, GV, LMG and LGV residues in aquatic products.     

Anion-directed assembly: Framework conversion in dimensionality and photoluminescence

Six novel Ni(II)-fluconazole complexes formulated as (C₁₃H₁₁N₆OF₂)₂Ni₂(NO₃)₂ (1), (C₁₃H₁₂N₆OF₂)₂Ni(NO₃)₂·H₂O (2), (C₁₃H₁₂N₆OF₂)Ni(SO₄)(DMF)₂(H₂O) (3), (C₁₃H₁₂N₆OF₂)₂Ni(H₂O)₂(SO₄)·4H₂O (4), (C₁₃H₁₂N₆OF₂)₂NiCl₂·2(CH₃OH) (5), (C₁₃H₁₂N₆OF₂)₄Ni₂ (MoO₄)₂·6H₂O (6) have been hydrothermally or solvothermally synthesized under similar conditions except different anions and solvents. They are structurally characterized by elemental analysis, IR, TG and single crystal X-ray diffraction. Complex 1 is a molecular binuclear nickel cluster. Complex 2 exhibits a one-dimensional (1D) chain linked by double-stranded fluconazole-bridge. Complex 3 shows a novel 1D chain linked by double-stranded fluconazole-bridge and double-stranded SO₄²⁻-bridge. Complex 4 shows a three-dimensional (3D) architecture and SO₄²⁻ anions occupy the cavity. Complex 5 exhibits a two-dimensional (2D) structure constructed by alternating left- and right-handed helices. Complex 6 exhibits a 3D architecture, in which the 2D layers are pillared by {MoO₄} tetrahedra. Complex 2 can be irreversibly converted to complex 1 in the presence of DMF (N,N′-dimethyllformamide). Complexes 1, 3 and 6 show antiferromagnetic interactions between the nickel (II) ions The photoluminescence properties of the six complexes indicated that the introduction of different anions can enhance or weaken the intra-ligand transitions of fluconazole.     

Recognition of alkyl ketone molecules based on thickness-shear-mode acoustic sensors with calixarene derivatives

The frequency response characteristics for twenty-two organic vapours by piezoelectric thickness-shear-mode (TSM) acoustic wave sensors coated with four supramolecule compounds—calixarenes have been investigated. Among them, 2,8,14,20-tetraethyl-4,6,10,12,16,18,22,24-octahydroxylcalix[4]arene (I) was the most efficient actively adsorptive material for host-guest recognizing alkyl ketone molecules such as 2-butanone and acetone. The supramolecule recognition mechanism has been discussed, that is based on the formation of C-H?π bond interaction between the methyl group of ketone molecule and the phenyl ring of the calixarene compound. The linear range of the TSM sensor upon exposure to 2-butanone vapour was 0-940.5 ppm with a detection limit of 2.67 ppm when the coating mass of the compound I was selected as 19 μg. The kinetics behaviours in the adsorption and desorption processes have been examined with polynomial curve fitting procedure. Furthermore, the proposed TSM sensor possessed good selectivity, reversibility, reproducibility and high stability. Compared with gas chromatography (GC) method, the proposed sensor can be used for on-line determination of 2-butanone vapour in air with a recovery of 94.8-106.5%, which was in consistent with those obtained by GC method.     

Circle-sum and minimal genus surfaces in ruled 4-manifolds

We describe a circle-sum construction of smoothly embedded surface in a smooth 4-manifold. We apply this construction to give a simpler solution of the minimal genus problem for nontrivial bundles over surfaces. We also treat the case of blow-ups.

     

Cl+F2→ClF+F和F+ClF′→ClF+F′反应机理的密度泛函理论研究

用密度泛函理论（ＤＦＴ）Ｂ３ＬＹＰ方法,在６－３３１Ｇ＊基组下,计算研究了反应Ｃｌ＋Ｆ２→ＣｌＦ＋Ｆ和对称反应Ｆ＋ＣｌＦ’→ＣｌＦ＋Ｆ’的机理。求得前者的过渡态为三角形,活化能为１５．５７ｋＪ·ｍｏｌ＾－１;后者的过渡态为线形和三角形,活化能分别为１１．５２和１９６．２５ｋＪ·ｍｏｌ＾－１。结果均经过振动分析和ＩＲＣ计算验证。