Metallation of aliphatic carbon atoms: II,syntheses and characterization of the cyclopalladated complexes of N,N-dimethylneopentylamine

N,N-Dimethylneopentylamine reacts with Pd(MeCO₂)₂ to give a novel trinuclear cyclopalladated complex [Me₂NCH₂CMe₂CH₂Pd(μ-MeCO₂)₂Pd(μ-MeCO₂)₂PdCH₂CMe₂CH₂NMe₂]?-0.5C₆H₆ (I). The reaction of I with PPh₃ affords both trans-[Pd(MeCO₂)₂(PPh₃)₂] (II) and [Pd(CH₂CMe₂CH₂NMe₂)(MeCO₂)(PPh₃)] (III). The reaction of III with LiCl yields a mononuclear cyclopalladated complex, [Pd(CH₂CMe₂CH₂NMe₂)Cl(PPh₃)] (IV).     

Quantitative evaluation of stress distribution in bulk polymer samples through the comparison of mechanical behaviors between giant single‐crystal and semicrystalline samples of poly(trans‐1,4‐diethyl muconate)

The Raman shift and crystallite modulus were measured under the application of tensile force for a giant single crystal and a series of uniaxially oriented semicrystalline samples of poly(trans‐1,4‐diethyl muconate) (polyEMU). The apparent Raman shift factor α^app or a vibrational frequency shift per 1 GPa tensile stress was higher for the semicrystalline samples with lower crystallinity or lower bulk modulus. The apparent crystallite modulus E or Young's modulus along the chain axis in the crystalline region was not constant but varied remarkably between the giant single crystal and semicrystalline samples. A systematic change in α^app and E among the polyEMU samples with different preparation history could be interpreted quantitatively on the basis of a mechanical series parallel model consisting of crystalline and amorphous phases. The origin of different E and α^app was speculated to be a stress concentration on the taut‐tie chain contained as a parallel crystalline component in the mechanical model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 444–453, 2003     

Photo-induced structural changes of azobenzene Langmuir-Blodgett films

Structural changes of the Langmuir-Blodgett (LB) films of azobenzene accompanied by photoisomerization are described. First, photoisomerization is explained in terms of 'free volume'. In the polyion complex monolayers of amphiphiles having two azobenzene units at the air-water interface, the area per molecule depends on the polycation species. The fraction of cis-azobenzene in the LB films at the photostationary state under the illumination with UV light increased with increasing area per molecule, which is consistent with the concept of free volume. Second, a counter example of the concept of free volume is presented. Three-dimensional cone-shaped structures developed with trans-to-cis photoisomerization in the polyion complex LB film of a water-soluble amphiphilic azobenzene. These structures appeared and disappeared reversibly by alternate illumination with UV and visible light. The results indicate that the two-dimensional LB film structure exerts significant modification by photoisomerization. This is against the concept of free volume because this concept does not consider the possibility that the two-dimensional LB film structures may change into three-dimensional ones. Finally, photo-induced J-aggregate formation of non-photochromic and photochromic dyes is described. Two cyanine dyes were each mixed with an amphiphilic azobenzene in the LB films. These cyanine dyes are known to form J-aggregates in single-component LB films. In the mixed LB films, the J-aggregate formation was suppressed to some extent. The alternate illumination of the films with UV and visible light caused the photoisomerization of azobenzene in the mixed LB films, which triggered the J-aggregate formation of the cyanine dyes. The J-aggregate formation was accompanied by the development of three-dimensional cone-shaped structures from the film surface. When an amphiphilic merocyanine was mixed with the azobenzene in the LB films, J-aggregate formation was also induced by the alternate illumination with UV and visible light. This J-aggregate formation was also accompanied by a large morphological change: circular domains changed into fractal-like ones. The J-aggregate formation of the dyes and the concomitant morphological change were irreversible. In these cases, the photoisomerization of azobenzene served as a trigger to induce self-organization of the dye molecules.     

Drying dissipative structures of the aqueous suspensions of monodisperse bentonite particles

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the fractionated and monodisperse bentonite particles (plate-like in their shape) in aqueous deionized suspension and in the presence of NaCl have been studied on a cover glass. The patterns coexisted with the broad ring of the hill accumulated with the particles and with the round hills are formed around the outside edges of the film and in the center, respectively, in the macroscopic scale. By the addition of NaCl the pattern shifts from the broad ring to the round hill in the center. The spoke-like cracks, which have been observed for the suspensions of the spherical particles so often hitherto, are not observed at all for the bentonite suspensions. The characteristic convection flow of the particles and the interactions among the particles and substrate are important for the macroscopic pattern formation. Wrinkled, branch-like and/or star-like fractal patterns are observed in the microscopic scale. These patterns are determined mainly by the electrostatic and polar interactions between the particles and/or between the particle and the substrate in the course of drying.     

Effect of pH on colloidal properties of native ovalbumin aqueous systems

The effect of pH on the molecular shape and dispersed state of native ovalbumin molecules in 20 mM phosphate and acetic acid buffer solutions has been studied using small-angle x-ray scattering (SAXS) and a rheological method The degree of association of the OA molecule at the 0.5% colloid system increases slightly with decreasing pH, i.e., 2.10 at pH 7.0, and 2.88 at pH 4.0, and the radius of the OA molecule decreases slightly with decreasing pH, i.e., 24.5 Å at pH 7.0, and 22.0 Å at pH 4.0.The OA colloid shows apparent yield stress and rigidity which are due to a certain ordered arrangement of the molecules. The yield stress and the rigidity increase abruptly at a pH value near to an isoelectric point (ca. pH 4.4). In the dilute system this increment is attributed to the change in the ordered arrangement or in the interparticle interaction, and not to the change in the association state of the OA molecules. The values of the yield stress and the rigidity remain almost constant over a wide concentration range and this feature (an auto-controlled mechanism) is kept over a certain range of pH.     

Synthetic studies of vitamin D analogues. IX. Synthesis and differentiation-inducing activity of 1 alpha,25-dihydroxy-23-oxa-, thia-, and azavitamin D3.

Three vitamin D3 analogues, 1 alpha,25-dihydroxy-23-oxavitamin D3 (3), 1 alpha,25-dihydroxy-23-thiavitamin D3 (4) and 1 alpha,25-dihydroxy-23-azavitamin D3 (5) were synthesized. In the differentiation-inducing activity of human myeloid leukemia cells into macrophages in vitro, the 23-aza analogue (5) showed the least activity, while no remarkable differences were observed between the 23-oxa analogue (3) and the 23-thia analogue (4), which were less active than 1 alpha,25-dihydroxyvitamin D3 (1).     

Studies on antitumor agents. IX. Synthesis of 3'-O-benzyl-2'-deoxy-5-trifluoromethyluridine

A practical synthesis of 3'-O-benzyl-2'-deoxy-5-trifluoromethyluridine (1), a candidate antitumor agent for clinical testing, was developed from 2'-deoxy-5-iodouridine (3). Benzylation of 2'-deoxy-5-iodo-5'-O-trityluridine (14) with benzyl bromide and sodium hydride in tetrahydrofuran gave the 3'-O-derivative (16). Benzoylation of 16 afforded the N3-benzoyl derivative (17). Coupling of 17 with trifluoromethylcopper, prepared from bromotrifluoromethane and copper powder in the presence of 4-dimethylaminopyridine, gave the 5-trifluoromethyl derivative (19) minimally contaminated with the 5-pentafluoroethyl compound. Deprotection of 19 furnished 1.     

Reactive oligomers. II. Polymerization of glycol bis(allyl phthalate)s and glycol bis(allyl succinate)s

Seven glycol bis(allyl phthalate)s (GBAP) and four glycol bis(allyl succinate)s (GBASu) as reactive oligomers were prepared and their polymerization behaviors were investigated in detail in terms of cyclopolymerization and gelation as compared with diallyl dicarboxylates. Thus, the rates of polymerization of GBAPs were reduced compared to diallyl phthalate, being attributed to the steric effect on the intermolecular propagation of the uncyclized radical, whereas those of GBASus were enhanced as a consequence of intermolecular association by dipole–dipole interaction in polar GBASu monomers. Cyclization was enhanced in the following order: diallyl aliphatic dicarboxylates series < GBASu series < GBAP series. Gelation was discussed according to Gordon's theory; the actual gel-point conversions increased with an increase in the molecular weight of monomers, although the discrepancy between actual and theoretical gel-point conversion inversely tended to be decreased. The decreased delay in gelation with an increase of the molecular weight of monomers is ascribed to the reduction of excluded volume effects on crosslinking.     

Absorption enhancement of polypeptide drugs by cyclodextrins. I. Enhanced rectal absorption of insulin from hollow-type suppositories containing insulin and cyclodextrins in rabbits.

The absorption of insulin (from porcine pancreas) from the rectum of rabbits after the administration of hollow-type suppositories containing insulin and five kinds of cyclodextrins (CyDs) was investigated. Three types of suppositories were employed: suppository I containing insulin (approximately 26 IU/mg) and various amounts of each CyD in citric buffer solution at pH 3.0 or powder in its cavity, suppository II containing CyD without insulin, and suppository III containing insulin without CyD. Without CyD, the insulin and glucose levels in plasma were unchanged, whereas a significant increase in the plasma insulin concentration and a marked decrease in the glucose levels were found following simultaneous administration of insulin and CyDs by suppository I. The enhancing effect of CyD on rectal insulin absorption (absorption-enhancing effect) by chemically modified CyDs (heptakis(2,6-di-O-methyl)-beta-CyD (DM-beta-CyD) and 2-hydroxypropyl-beta-CyD (HP-beta-CyD)) was higher than those by natural CyDs (alpha-, beta-, and gamma-CyD). The area under the plasma concentration-time curve (AUC) and Cmax of insulin significantly decreased with the preadministration (administration of CyD 6, 24 and 48 h before rectal insulin administration) of DM-beta-CyD. The absorption-enhancing effect disappeared 24 h after preadministration. These results suggest that CyDs enhance insulin absorption from the rectum, and that attenuation of the membrane transport barrier function in the rectum recovers at a maximum of 24 h after administration of CyDs.