The crystal and molecular structure of 1,1,1,3,3,3-hexaphenyl-1,3-disilapropane

Crystals of the title compound H₂C(SiPh₃)₂ are triclinic, space group P$\text{1}$, with a = 9.290(2), b = 12.128(4), c = 16.882(4) Å, α = 62.08(1), β = 106.88(1), γ = 117.28(2)° and Z = 2. The central skeletal angle SiCSi is 128.8(7)°. The structures of the molecules H₂C(SiR₃)₂ (R = H, CH₃, and Ph) are compared and discussed: a simple model for the skeletal geometry of species H₂C(MR₃)₂ is proposed, and tested against experimental data and theoretical calculations.     

Preparation and characterization of dealuminated metakaolin and its use in the transformation of waste plastics to aromatic hydrocarbons

Acid activated metakaolins (AAMKs) have been prepared by calcination of the natural clay at 600 degrees C to provide a metakolin which was then leached at 80 degrees C for 3 h using 1M, 2M, 3M, and 6M HCl. These materials were characterized and their ability to transform the off gases from HDPE decomposition into useful aromatic species was evaluated. The amount of adsorbed water and the number of acid sites increased with the severity of acid treatment. Variable temperature DRIFTS spectroscopy of pyridine treated samples revealed that both Br?nsted and Lewis acid centers were present until 425 degrees C. Pyridine bonded to the Lewis acid centers was more thermally stable. The AAMKs were all selective to the production of toluene with respectable, but lesser, amounts of xylenes and trimethylbenzenes. This selectivity contrasts with that of acid leached and pillared smectites which are selective toward trimethylbenzene.     

Inductively coupled plasma compared with direct current arc spectrometry for analysis of minor elements in aluminium baths

A validation study was carried out in order to evaluate the efficiency of inductively coupled plasma-optical emission spectrometry (ICP-OES) for the analysis of minor elements (manganese, chromium, copper, iron, and titanium) in aluminium alloys. Aluminium casting samples were obtained by adding compressed powder compacts of each alloying element and aluminium (minitablets) to aluminum baths in a laboratory crucible furnace. Digestion of solid samples was performed using concentrated HCI and H202 35% (v/v) previous to analysis by ICP-OES without any matrix separation. This solution-based method was validated considering direct current arc spectrometry as the reference method based on direct analysis without any pretreatment of the solid samples considered. Univariate statistical procedures were carried out, for which precision <3% and trueness of the analytical results were taken into account.     

An electrochemical multienzymatic biosensor for determination of cholesterol

This paper describes an electrochemical biosensor for free cholesterol monitoring. The sensor is a multienzymatic electrodic system in which horseradish peroxidase and cholesterol oxidase are simultaneously immobilized within a polymeric film, on the surface of a pyrolitic graphite electrode. From voltammetric and amperometric (flow-injection) data obtained, the efficiency, reproducibility and stability of the system are discussed. Results obtained, of interest for basic and applied biochemistry, represent a first step for construction of a mediator-free biosensor with potentialities for a successful application in the biosensor area.     

Polyethene with pendant fullerene moieties

Polyethene with fullerene moieties pendant on short-chain branches was prepared by the catalytic copolymerization of ethene and a fullerene-containing vinylic comonomer, yielding polyethene copolymers containing up to 25 wt% of C60.     

Enhancing calibration models for non-invasive near-infrared spectroscopical blood glucose determination

Partial least-squares regression (PLS) and radial basis function (RBF) networks are used to compute calibration models for non-invasive blood glucose determination by NIR diffuse reflectance spectroscopy. A model computation shows that even extremely small deviations of the spectra induce increased prediction errors. Since the spectral contribution of blood glucose is much smaller than deviations resulting from the non-invasive measuring process a method based on Pearson’s correlation coefficient can be used for evaluating the quality of the recorded spectra during the prediction step. Another method is based on the leverage values from the hat matrix of the RBF network. Both methods lead to a significant decrease in prediction error.     

Development and critical comparison of greener flow procedures for nitrite determination in natural waters

Two greener procedures for flow-injection spectrophotometric determination of nitrite in natural waters were developed and critically compared. Replacement of toxic reagents, waste minimization and treatment were exploited to attend the standards of clean chemistry. The flow system was designed with solenoid micro-pumps in order to minimize reagent consumption and waste generation. The first procedure is based on the Griess diazo-coupling reaction with sulfanilamide and N-(1-naphthyl)ethylenediamine (NED) yielding an azo dye, followed by photodegradation of the low amount of waste generated based on the photo-Fenton reaction. The second procedure is based on the formation of iodine from nitrite and iodide in acid medium in order to avoid the use of toxic reagents. For Griess method, linear response was achieved up to 1.0 mg L^− 1, described by the equation A = − 0.007 + 0.460C (mg L^− 1), r = 0.999. The detection limit was estimated as 8 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.8% (n = 20). The sampling rate was estimated as 108 determinations per hour. The consumption of the most toxic reagent (NED) is reduced 55-fold and 20-fold in comparison to batch method and flow injection with continuous reagent addition, respectively. A colorless residue was obtained by in-line photodegradation with reduction of 87% of the total organic carbon content. The results obtained for natural water samples were in agreement with those achieved by the reference method at the 95% confidence level. For the nitrite–iodide method, linear response was observed up to 2.0 mg L^− 1, described by the equation A = − 0.024 + 0.148C (mg L^− 1), r = 0.999. The detection limit was estimated as 25 μg L^− 1 at the 99.7% confidence level and the coefficient of variation was 0.6% (n = 20). The sampling rate was estimated as 44 determinations per hour. Despite avoiding the use of toxic reagents, the nitrite–iodide method presented worst performance in terms of selectivity and sensitivity.     

Diels-Alder chemistry on alkene functionalized films

A substrate-independent method has been devised for ring formation at solid surfaces. This entails the aminolysis reaction of allylamine with maleic anhydride pulsed plasma polymer films to yield terminal alkene groups at the surface. Subsequent exposure to 1,3-cyclohexadiene leads to a Diels-Alder type (4 + 2) cycloaddition reaction to give a mixture of endo- and exo-bicyclo[2.2.2]oct-2-ene rings.     

Stimulating effect of graphite admixture on hydrogen sorption-desorption properties of mechanically activated titanium powder

The effect of graphite admixture on hydrogen sorption-desorption properties of mechanically activated electron microscopy, temperature-programmed reaction, and temperature-programmed desorption techniques. The major effect of graphite addition was found to be the formation of microporous carbon matrix particles containing randomly distributed titanium particles only several nanometers in diameter. This powder architecture enhances hydrogen transport to the titanium surface without hindrances and promotes titanium-hydrogen interaction by modifying the titanium surface and subsurface layers with interstitial carbon atoms.     

OVERVIEW ON SURFACE MICROSTRUCTURING BY PHOTODESORPTION ETCHING OF CHLORINATED SILICON

Developing a mechanistic interpretation of complex dynamical chemical systems such as halogen photoetching requires correlated microscopic data on the kinetics, dynamics, surface composition and microstructure of prototypical and real surfaces. This overview is concerned especially with two important variables which significantly influence the microetching mechanisms and structures; (I) the role of electronic point defects induced by substitutional doping in producing site-specific reactions and, (II) the quantum mechanical enhancement of chemical reaction induced by uv-radiation at low fluences and temperatures.

From uv-photoetching and photodesorption studies of heavily doped Si(100) and Si(111) with chlorine beams at low laser fluences, the mechanisms of photostimulated desorption is analyzed based primarily on the kinetics of chemisorption and surface layer microanalysis obtained from core-level photoemission. These results are coupled with time-of-flight dynamical measurements on the energetics of the photodesorption process to provide a more unified understanding of anisotropic photon-stimulated microetching.

Substantial alterations of the etching mechanisms occur when selective surface molecular processes are driven quantum mechanically by low level photon radiation rather than thermally. This is clearly reflected in the dynamical mechanisms for photodesorption which become strongly site- and atomic process-selective illustrated by the energetics of the processes. Creation and transport of charged carriers, especially at high doping levels by photoionization coupled with field-induced charge transport, introduces new reaction channels into the surface chemistry leading to resultant changes in the microstructure on an atomic scale. The results from the kinetics, velocity dynamics and film composition measurements are combined in terms of the dependency of chlorine adsorption on doping at high carrier levels and low laser fluences, to provide an improved interpretation of the anisotropic microetching in terms of field-promoted electron-hole activation.