Determination of copper in water and plant samples by flame atomic absorption spectrometry after preconcentration on octadecyl silica membrane disks modified with a recently synthesized Schiff's base

A simple, selective, reliable, and sensitive method for the determination of trace amounts of CU2+ ions in aqueous samples is proposed. The Cu2+ ions are adsorbed quantitatively during the passage of aqueous samples through an octadecyl (C18) silica membrane disk modified by a symmetrical tetradentate Schiff base ligand, N,N'-bis(4-phenylazo salicylaldimine) 3-chloro-1,2-phenylenediamine (H2L). The retained Cu2+ ions were then stripped from the disk by elution with the minimal amount of nitric acid solution and determined by flame atomic absorption spectrometry. Various parameters, such as the effect of pH, flow rate, type and amount of eluent, and the effects of various cationic interferences on the recovery of ions were studied. The proposed method permitted large enrichment factors (about 550 and higher). The limit of detection of the method was 1.5 x 10(-2) microg/L. The use of the same disk modified with 6 mg H2L for at least 30 times showed no change in the recovery of Cu2+ ions. The accuracy of the method was confirmed by determination of Cu2+ ions in standard samples [National Institute of Environmental Studies (NIES) No. 2 and Nippon Keikinzoku Kogyo (NKK) No. 920]. The results demonstrated good agreement with certified values.     

Embedded Nanoparticles in Schottky and Ohmic Contacts: A Review

Schottky and Ohmic contacts are essential parts of electronic and optoelectronic devices based on semiconductor materials. Controlling the contact/semiconductor interface properties is the key to obtaining a contact with an optimum performance. Contacts incorporated by nanomaterials, i.e., nano-sized particles that are embedded at the interface of contact/semiconductor, can transform the conventional approaches of contact fabrication, resulting in more reproducible, tunable and efficient electronic, and optoelectronic devices. This article is a review of theoretical and fabrication progress on the last two decades to produce contacts with embedded nanoparticles (NPs). The review covers common routes of NPs deposition on different substrates (e.g., Si, Ge, SiC, GaN, GaAs₆₇P₃₃, and InP) for nanostructured contact fabrication and the theoretical models to investigate the NPs effects on the conduction mechanism and electrical properties of devices.     

Inclusion of sulfamethoxazole in a novel CuFe2O4 nanoparticles/mesoporous silica‐based nanocomposite: Release kinetics and antibacterial activity

In this work, we aimed to improve the antibacterial activity of sulfamethoxazole (SMX) via its inclusion in a newly synthesized nanocomposite composed of CuFe₂O₄ nanoparticles and poly(vinyl alcohol)/silica‐based mesoporous materials. Characterization of this formulation using different techniques confirmed the correct synthesis and showed that this mesoporous nanocomposite had an amorphous structure with relatively high surface area of 1,620.7 m² g^?1 and mean pore diameter of 1.6576 nm. Zeta potential of the formulation was obtained to be zero which led to its higher bioavailability in comparison to pure SMX with negative zeta potential. Antibacterial property of the prepared formulation against Staphylococcus aureus and Escherichia coli was evaluated. Minimum inhibitory concentration of the SMX‐loaded mesoporous nanocomposite was considerably lower than those of pure SMX, indicating the efficient function of the mesoporous material as a delivery system. Kinetics of SMX release was also studied using zero‐order, first‐order, Higuchi, and Korsmeyer–Peppas kinetics models. According to the obtained results, the release kinetics was found to obey zero‐order model. So the possibility of sustained release of SMX from the synthesized carrier may be suggested.     

Development of effervescence-assisted switchable polarity solvent homogeneous liquid-phase microextraction for the determination of permethrin and deltamethrin in water samples prior to gas chromatography–flame ionization detection

An effervescent tablet-assisted switchable polarity solvent–based homogeneous liquid-phase microextraction combined with gas chromatography with flame ionization detection has been conducted for the separation, preconcentration, and detection of permethrin and deltamethrin in the river water specimens. Triethylamine (TEA) was utilized as the switchable polarity solvent in this method. The switching process was carried out by the dissolution of an effervescent tablet including an effervescency agent (sodium carbonate) and a proton donor agent (citric acid). Changing the pH of the specimen solution enhanced the conversion of TEA into protonated triethylamine carbonate through the tablet that generated carbon dioxide bubbles in situ. Finally, the addition of sodium hydroxide changed the ionization state of TEA and separated the two phases. Influential factors in the extraction were investigated. According to optimal situations, the limit of detection and the limit of quantification were 0.16 and 0.5 μg L⁻¹ for permethrin and 0.03 and 0.1 μg L⁻¹ for deltamethrin, respectively. The preconcentration factor was 194 in river water samples and inter- and intra-day precision (relative standard deviation %; n = 5) was <5%. The extraction recovery was obtained in the range of 93.0%–97% for permethrin and deltamethrin in water samples.     

Tracking Microstructure Evolution in Complex Biaxial Strain Paths: A Bulge Test Methodology for the Scanning Electron Microscope

Experimental Mechanics - In this work, a novel method is presented to track site-specific microstructure evolution in metallic materials deformed biaxially along proportional and complex strain...     

Hydration strongly affects the molecular and electronic structure of membrane phospholipids

We investigate the structure and electronic properties of phosphatidylcholine (PC) under different degrees of hydration at the single-molecule and monolayer type level by linear scaling ab initio calculations. Upon hydration, the phospholipid undergoes drastic long-range conformational rearrangements which lead to a sickle-like ground-state shape. The structural unit of the tilted gel-phase PC appears to be a water-bridged PC dimer. We find that hydration dramatically alters the surface potential, dipole and quadrupole moments of the lipids and consequently guides the interactions of the lipids with other molecules and the communication between cells.     

A robust model for a leader–follower competitive facility location problem in a discrete space

This paper aims at determining the optimal locations for the leader’s new facilities under the condition that the number of the follower’s new facilities is unknown for the leader. The leader and the follower have some facilities in advance. The first competitor, the leader, opens p new facilities in order to increase her own market share. On the other hand, she knows that her competitor, the follower, will react to her action and locate his new facilities as well. The number of the follower’s new facilities is unknown for the leader but it is assumed that the leader knows the probability of opening different numbers of the follower’s new facilities. The leader aims at maximizing her own market share after the follower’s new facilities entry. The follower’s objective is also to maximize his own market share. Since the number of the follower’s new facilities is unknown for leader, “Robust Optimization” is used for maximizing the leader’s market share and making the obtained results “robust” in various scenarios in terms of different numbers of the follower’s new facilities. The optimal locations for new facilities of both the leader and the follower are chosen among pre-determined potential locations. It is assumed that the demand is inelastic. The customers probabilistically meet their demands from all different facilities and the demand level which is met by each facility is computed by Huff rule. The computational experiments have been applied to evaluate the efficiency of the proposed model.     

Numerical investigation of heat transfer augmentation through geometrical optimization of vortex generators

In this paper a two-dimensional numerical simulation of a steady incompressible and turbulent model has been carried out to study the effects of vortex generators in a compact heat exchanger in a curvilinear coordinate system. The mesh which is applied in this study is boundary fitted and has been smoothed by a Laplace operator. Experimental data of a former study has been applied to validate the numerical results. The effects of geometrical variation are studied by adjusting vortex generators’ inclination and relative cross location. The major issue of this study is the optimal trade-off by selecting an optimal geometric, considering the opposite influences of geometrical variation on Nusselt number and pressure drop.