Multiclass determination of 66 organic micropollutants in environmental water samples by fast gas chromatography–mass spectrometry

A multiresidue method has been developed for quantification and identification of 66 multiclass priority organic pollutants in water by fast gas chromatography (GC) coupled to mass spectrometry (MS). Capabilities and limitations of single quadrupole mass spectrometer as detector in fast GC were studied evaluating the chromatographic responses in terms of sensitivity and chromatographic peak shapes, as they were influenced by scan time. The number of monitored ions in a selected ion monitoring (SIM) group strongly conditioned the scan time and subsequently the number of data points per peak. A compromise between peak shape and scan time was adopted in order to reach the proper conditions for quantitative analysis. An average of 10–15 points per peak was attained for most compounds, involving scan times between 0.1 and 0.22 s. The method was validated for mineral, surface, and groundwater. A solid-phase extraction pre-concentration step using C₁₈ cartridges was applied. Four isotopically labeled standards were added to the samples before extraction and used as surrogates to ensure a reliable quantification. Analyses were performed by GC–MS in electron ionization mode, monitoring the three most abundant and/or specific ions for each compound and using the intensity ratios as a confirmatory parameter. With a chromatographic run of less than 10 min, SIM mode provided excellent sensitivity and identification capability due to the monitoring of three ions and the evaluation of their intensity ratio. Limits of detection below 10 ng/L were reached for most of the 66 compounds in the three matrices studied. Accuracy and precision of the method were evaluated by means of recovery experiments at two fortification levels (10 and 100 ng/L), obtaining recoveries between 70% and 120% in most cases and relative standard deviations below 20%. The possibilities of a simultaneous SIM scan method have also been explored for non-target qualitative analysis. The developed method has been applied to the analysis of surface water samples collected from the Mediterranean region of Spain.     

Formation of membranes based on polyacrylonitrile and butadiene-acrylonitrile elastomer in the presence of copper ions

The presented study provides a possibility to create ultrafiltration (UF), polyacrylonitrile(PAN)/butadiene-acrylonitrile elastomer (BNR)/N,N-dimethylformamide (DMF) membranes. Influence of different concentrations of the elastomer on the formation of a more porous structure was studied and compared with that observed using membranes made of polyacrylonitrile. Specific influence of copper ions in a solution of polymers on the formation of an asymmetric selective layer was also monitored. The study was conducted to prepare membranes with high efficiency in emulsion and colloidal systems separation.     

Surfactant-based dispersant for multiwall carbon nanotubes to prepare ceramic composites by a sol-gel method

A dispersant for multiwall carbon nanotubes (MWCNTs) is proposed that fulfils the requirements of creating a uniform dispersion in the matrix and obtaining a good interface between CNTs and the matrix, and is soluble in generic nonpolar solvents. This dispersant is based on a long chain surfactant, called in this work dabcosil stearate, containing a stearate-based 18-carbon alkyl chain as an anion, and a silsesquioxane containing a bridged, positively charged 1,4-diazoniabicyclo[2.2.2]octane group. It provides not only a very good dispersion medium for the MWCNTs, but also a very good interface between MWCNTs and ceramic matrices, such as alumina and zirconia, prepared by the sol-gel method.     

Unraveling dendrimer translocation across cell membrane mimics

Poly(amidoamine) (PAMAM) dendrimers are promising candidates in several applications within the medical field. However, it is still to date not fully understood whether they are able to passively translocate across lipid bilayers. Recently, we used fluorescence microscopy to show that PAMAM dendrimers induced changes in the permeability of lipid membranes but the dendrimers themselves could not translocate to be released into the vesicle lumen. Because of the lack of resolution, these experiments could not assess whether the dendrimers were able to translocate but remained attached to the membrane. Using quartz crystal microbalance with dissipation monitoring and neutron reflectivity, a structural investigation was performed to determine how dendrimers interact with zwitterionic and negatively charged lipid bilayers. We hereby show that dendrimers adsorb on top of lipid bilayers without significant dendrimer translocation, regardless of the lipid membrane surface charge. Thus, most likely dendrimers are actively transported through cell membranes by protein-mediated endocytosis in agreement with previous cell studies. Finally, the higher activity of PAMAM dendrimers for phosphoglycerol-containing membranes is in line with their high antimicrobial activity against Gram-negative bacteria.     

Measurement of the phase behaviour of the binary systems {carbon dioxide (CO2) + non-ionic surfactants (CiEOj)}

Solubility experiments of ethoxylates surfactants denoted as C_iEO_j (where C_i = hydrocarbon tail, EO_j = oxyethylene groups, i = 6 to 8 and j = 3 to 5) in sub- and supercritical carbon dioxide were carried out at different temperatures, pressures, and concentrations in a Cailletet apparatus as a representative model for dry cleaning system. For a variety of compositions, results are reported for binary systems within temperature and pressure ranges of (260 to 310) K and (2.0 to 10) MPa respectively. In each experiment, the surfactants reach equilibrium with carbon dioxide at different concentrations. The data show that with all the surfactants upon increasing concentration, the liquid–liquid (L–L) curve shifts to lower temperatures. Therefore, the one-phase solution gap is reduced in pressure and temperature at higher concentrations. When the length of the hydrocarbon tail remains constant and the ethoxylated chain is increased from three to five groups, the L–L curve once again shifts to lower temperatures and the two phases start earlier. This effect can be attributed to the higher surfactant’s polarity due to the increase in j. On the other hand, when the number of ethoxylated groups j remains constant and the length of the hydrocarbon tail is increased from six to eight carbon atoms, no significant shift in the L–L curve is observed. That signals the fact that the appearance of two phases is directly related to the number of ethoxylated group which determine the polarity of the molecule.     

Synthesis,Structure, and Reactivity of RuII Complexes with Trimethylsilylethinylamidinate Ligands

The mononuclear amidinate complexes [(η⁶‐cymene)‐RuCl( 1a )] ( 2 ) and [(η⁶‐C₆H₆)RuCl( 1b )] ( 3 ), with the trimethylsilyl‐ethinylamidinate ligands [Me₃SiC≡CC(N‐c‐C₆H₁₁)₂]^– ( 1a^– ) and[Me₃SiC≡CC(N‐i‐C₃H₇)₂]^– ( 1b^– ) were synthesized in high yields by salt metathesis. In addition, the related phosphane complexes[(η⁵‐C₅H₅)Ru(PPh₃)( 1b )] ( 4a ) [(η⁵‐C₅Me₅)Ru(PPh₃)( 1b )] ( 4b ), and [(η⁶‐C₆H₆)Ru(PPh₃)( 1b )](BF₄) ( 5 ‐BF₄) were prepared by ligand exchange reactions. Investigations on the removal of the trimethyl‐silyl group using [Bu₄N]F resulted in the isolation of [(η⁶‐C₆H₆)Ru(PPh₃){(N‐i‐C₃H₇)₂CC≡CH}](BF₄) ( 6 ‐BF₄) bearing a terminal alkynyl hydrogen atom, while 2 and 3 revealed to yield intricate reaction mixtures. Compounds 1a / b to 6 ‐BF₄ were characterized by multinuclear NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and elemental analyses, including X‐ray diffraction analysis of 1b , 2 , and 3 .     

The determination of tissue-specific DNA methylation patterns in forensic biofluids using bisulfite modification and pyrosequencing

The goal of this study is to explore the application of epigenetic markers in the identification of biofluids that are commonly found at the crime scene. A series of genetic loci were examined in order to define epigenetic markers that display differential methylation patterns between blood, saliva, semen, and epithelial tissue. Among the different loci tested, we have identified a panel of markers, C20orf117, ZC3H12D, BCAS4, and FGF7, that can be used in the determination of these four tissue types. Since methylation modifications occur at cytosine bases that are immediately followed by guanine bases (CpG sites), methylation levels were measured at CpG sites spanning each marker. Up to 11 samples of each tissue type were collected and subjected to bisulfite modification to convert unmethylated CpG-associated cytosine bases to thymine bases. The bisulfite modified DNA was then amplified via nested PCR using a primer set of which one primer was biotin labeled. Biotinylated PCR products were in turn analyzed and the methylation level at each CpG site was quantitated by pyrosequencing. The percent methylation values at each CpG site were determined and averaged for each tissue type. The results indicated significant methylation differences between the tissue types. The methylation patterns at the ZC3H12D and FGF7 loci differentiated sperm from blood, saliva, and epithelial cells. The C20orf117 locus differentiated blood from sperm, saliva, and epithelial cells and saliva was differentiated from blood, sperm, and epithelial cells at a fourth locus, BCAS4. The results of this study demonstrate the applicability of epigenetic markers as a novel tool for the determination of biofluids using bisulfite modification and pyrosequencing.     

Theoretical study of methoxy group influence in the gas‐phase elimination kinetics of methoxyalkyl chlorides

The unimolecular gas‐phase elimination kinetics of 2‐methoxy‐1‐chloroethane, 3‐methoxy‐1‐chloropropane, and 4‐methoxyl‐1‐chloroburane has been studied by using density functional theory (DFT) methods to propose the most reasonable mechanisms of decomposition of the aforementioned compounds. Calculation results of 2‐methoxy‐1‐chloroethane and 3‐methoxy‐1‐chloropropane suggest dehydrochlorination through a concerted nonsynchronous four‐centered cyclic transition state (TS) to give the corresponding olefin. In the case of 4‐methoxyl‐1‐chloroburane, in addition to the 1,2‐elimination mechanism, the anchimeric assistance by the methoxy group, through a polar five‐centered cyclic TS, provides additional pathways to give 4‐methoxy‐butene, tetrahydrofuran and chloromethane. The bond polarization of the C? Cl, in the direction of C^δ+ ··· Cl^δ?, is the limiting step of these elimination reactions. The significant increase in rate together with the formation of a cyclic product tetrahydrofuran in the gas‐phase elimination of 4‐methoxyl‐1‐chloroburane is attributed to neighboring group participation of the oxygen of the methoxy group in the TS. The theoretical calculations show a good agreement with the reported experimental results. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Towards Controlled Graft Polymerization of Poly[styrene‐co‐(maleic anhydride)] on Functionalized Silica Mediated by Oxoaminium Bromide Salt. Facile Synthetic Pathway Using Nitroxide Chemistry

A TEMPO bromide salt is used to functionalize a silica surface with nitroxyl moieties. The functionalization reaction takes place in 48 h under mild conditions. In a second step, grafts of styrene‐maleic anhydride copolymer are grown from the functionalized silica surface by heating it in the presence of the monomers. FT‐IR and TGA analysis show that the silica was first functionalized with nitroxide moieties, and then that grafts of styrene‐maleic anhydride grew from the functionalized silica surface. A reaction mechanism is proposed in order to explain the findings. The results suggest that the oxoaminium salts are good candidates for the functionalization and grafting of surfaces that contain hydroxy groups and for the generation of hybrid materials with improved properties.