Ion-exchanger colorimetry-VIII Microdetermination of copper in natural waters

A microdetermination method for copper by ion-exchanger colorimetry has been developed. The porphyrin alpha,beta,gamma,gd-tetrakis(4-N-methylpyridyl)porphine was used as the colour reagent. After the complexation at pH 4.5 and 40 degrees , the surplus ligand was converted into the protonated species by addition of sulphuric acid. The complex and the ligand were easily sorbed on the cation-exchange resin, Dowex 50W-X2-H(+) (100-200 mesh). The resin-phase absorbances of the complex species at 424 nm and of the resin background at 510 nm were used for the measurements. There were no interferences by the foreign ions expected to be present in natural waters, at up to 1000 times the concentration of copper. With a 1 -litre sample the detection limit is 0.072 mug/l. It is possible to determine copper at mug/l. or lower levels in natural waters.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

Measurement of the carbonaceous component in the Milan urban particulate matter

The carbonaceous component in the Milan urban particulate matter, i.e. the two components black carbon (BC) and organic carbon (OC), has been measured by means of a thermogravimetric analyzer combined with an infrared spectrophotometer (TGA/FT-IR). While black carbon may be considered a primary pollutant, organic carbon includes both primary emissions and secondary organic aerosols. Since carbonaceous aerosol (including a small quantity of inorganic carbon, too) makes up roughly from 25% to 50% of the average annual PM 2.5 mass concentration, a deeper understanding of this component is required. The TGA/FT-IR technique, employed for the first time to our knowledge for the quantification of the particulate matter carbonaceous component, allows, thought the results here presented are preliminary, to assess the two components BC and OC in a simple way especially if compared with the methods reported in the literature. The total carbon (TC) determinations performed by TGA/FT-IR on Milan urban particulate matter are in good agreement with the results obtained by a total organic carbon (TOC) analyzer operating directly on the solid sample.     

Ion-exchanger phase absorptiometry for trace analysis

Ion-exchanger phase absorptiometry is based on the direct measurement of the degree of light-absorption by an ion-exchange resin phase which has sorbed a sample component. Direct application of the method makes it possible to determine trace elements in natural water samples without preconcentration. In this paper, all systems hitherto developed are reviewed and the theoretical background of solid-phase absorptiometry is described.     

Simultaneous determination of traces of heavy metals by solid-phase spectrophotometry

A coupling sensitive solid phase spectrophotometric (SPS) procedure for determination of traces of heavy metals (Me-SPS) and multicomponent analysis by multiple linear regressions (MA), a simple methodology for simultaneous determination of metals in mixtures was inaugurated. The Me-SPS procedure is based on sorption of heavy metals on PAN-resin and direct absorbance measurements of colour product Me-PAN sorbed on a solid carrier in a 1-mm cell. This methodology (Me-SPS-MA) was checked by simultaneous determination of metals in synthetic mixtures with different compositions and contents of metals important in pharmaceutical practice: Zn, Pb, Cd, Cu, Co, and Ni. Good agreement between experimental and theoretical amounts of heavy metals is obtained from the recovery test (78.3–110.0%). The proposed method enables determination of particular metal ion at the ng mL⁻¹ level and it was successfully applied to the determination impurities from heavy metal traces in pharmaceutical substances (Cu in ascorbic acid, Pb in glucose, and Zn in insulin). The proposed procedure could be possible contribution to the development of pharmacopoeial methodology for a heavy metals test.     

Synthesis of a new class of chiral 1,5-diphosphanylferrocene ligands and their use in enantioselective hydrogenation

A new family of ferrocenylphosphane ligands has been prepared. Their flexible synthesis allows many structural modifications. The asymmetric induction of these ligands was examined in the hydrogenation of functionalized C=C, C=O, and C=N bonds. The enantioselectivity of the reaction was strongly dependent on the substituent R at the position alpha to the ferrocene moiety. In many cases, both enantiomeric beta-hydroxyesters of the reduction product can be obtained by simply replacing a dimethylamino group in the ligand with a methyl group.