非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

手性胺酰胺型液相色谱手性固定相的制备及几种氨基酸衍生物的拆分

用(R)-1-苯基2-对甲基苯基乙基胺(PTE)与L-异亮氨酸制得含两个手性中心的手性选择剂,以琥珀酸酐作为连接臂,将手性选择剂键合到氨基丙基硅胶上制得手性固定相。以正己烷-异丙醇为流动相,利用该固定相对氨基酸衍生物进行高效液相色谱手性拆分,并考察了流动相中异丙醇含量对手性拆分的影响。结果表明,该手性固定相对所分析的氨基酸衍生物大部分都具有一定的拆分能力。当异丙醇含量为1%时,亮氨酸与苯丙氨酸的苯甲酰甲酯衍生物获得基线分离。当异丙醇含量为20%时,亮氨酸、缬氨酸、丙氨酸、谷氨酸的3,5-二硝基苯甲酰甲酯衍生物获得基线分离。     

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Copper(II)-catalyzed ether synthesis from aliphatic alcohols and potassium organotrifluoroborate salts

[reaction: see text] A protocol for the copper(II)-catalyzed etherification of aliphatic alcohols under mild and essentially neutral conditions is described. Air- and moisture-stable potassium alkenyl- and aryltrifluoroborate salts undergo cross-coupling with a variety of aliphatic primary and secondary alcohols and phenols, and are tolerant of a range of functional groups. The optimized conditions utilize catalytic copper(II) acetate with 4-(dimethylamino)pyridine as ligand in the presence of 4 A molecular sieves under an atmosphere of oxygen.     

氮杂冠醚研究Ⅶ、双仲胺型氮杂冠醚对过渡金属离子的选择性萃取作用

合成了五种新型双仲胺型氦杂冠醚，研究了它们对过渡金属离子进行液—液萃取，并用原子吸收法测定其浓度。实验结果表明：这类冠醚对Ａｇ￣＋、Ｐｄ￣（２＋）、和Ｐｔ￣（４＋）等贵金属离子有较强的选择配位性能，对选择性分离这些金属离子有重要的意义。     

硝酸钐水合物热分解过程的研究

Sm(NO_3)_3·6H_2O热分解过程的研究工作虽有文献报道,但结果不尽相同。文献[2]不同于文献[1,3],认为分解过程中存在无水盐阶段;文献[3]不同于文献[1,2],认为分解过程中存在低水合物。而且文献尚缺低水合物热分解机理的报道。我们也曾做过一些工作,但脱水阶段也不详尽。为此,我们详细地研究了Sm(NO_3)_3·nH_2O(n=     

多晶Hg0.09Cd0.91Te薄膜的光电化学行为

富镉Hg_(1-x)Cd_xTe是一种新型的光电转换材料,已用于固体结太阳能光伏电池:ITO/CdS/Hg_(1-)Cd_xTe/Au。我们曾对Hg_(1-x)Cd_xTe的电沉积机理作过研究。最近我们用电沉积制备的Hg_(0.09)Cd_(0.91)Te多晶薄膜做成了液体结太阳能光电化学电池并观察到明显光电响应。     

反相高效液相色谱法测定人血浆中曲尼司特浓度

 报道了用反相高效液相色谱法测定人血浆中曲尼司特浓度。以甲醇－磷酸二氢钾缓冲液（６０∶４０，Ｖ／Ｖ；ｐＨ４．２）为流动相，色谱柱采用ＹＷＧ－Ｃ１８不锈钢柱，紫外３３３ｎｍ波长检测，血浆样品经甲醇沉淀蛋白后直接进样测定。血浆浓度在０．６５～４０ｍｇ／Ｌ范围内线性良好，方法的平均回收率为１００．０％±４．１％。血浆最低检测浓度为０．２ｍｇ／Ｌ。对１０名健康志愿者口服２００ｍｇ曲尼司特后不同时间的血药浓度进行了测定。     

Photodynamic therapy based on organic small molecular fluorescent dyes

This review aims to provide a summary of the progress in organic small molecular fluorescent dyes for photodynamic therapy in recent years and it is classified according to the structures of dyes including cyanines, phthalocyanine, BODIPYs and other agents.