Substitutional mechanism of Ni into the wide-band-gap semiconductor InTaO4 and its implications for water splitting activity in the wolframite structure type

The mechanism of Ni substitution into the oxide semiconductor InTaO(4) has been studied through a combination of structural and spectroscopic techniques, providing insights into its previously reported photoactivity. Magnetic susceptibility and X-ray absorption near-edge spectroscopy (XANES) measurements demonstrate that nickel is divalent within the host lattice. The combined refinement of synchrotron X-ray and neutron powder diffraction data indicates that the product of Ni doping has the stoichiometry of (In(1-x)Ni(2x/3)Ta(x/3))TaO(4) with a solubility limit of x ≈ 0.18, corresponding to 12% Ni on the In site. Single-phase samples were only obtained at synthesis temperatures of 1150 °C or higher due to the sluggish reaction mechanism that is hypothesized to result from small free energy differences between (In(1-x)Ni(2x/3)Ta(x/3))TaO(4) compounds with different x values. Undoped InTaO(4) is shown to have an indirect band gap of 3.96 eV, with direct optical transitions becoming allowed at photon energies in excess of 5.1 eV. Very small band-gap reductions (less than 0.2 eV) result from Ni doping, and the origin of the yellow color of (In(1-x)Ni(2x/3)Ta(x/3))TaO(4) compounds instead results from a weak (3)A(2g) → (3)T(1g) internal d → d transition not associated with the conduction or valence band that is common to oxide compounds with Ni(2+) in an octahedral environment.     

Effect of gamma radiation on the mechanical and barrier properties of HEMA grafted chitosan-based films

Chitosan films were prepared by dissolving 1% (w/v) chitosan powder in 2% (w/v) aqueous acetic acid solution. Chitosan films were prepared by solution casting. The values of puncture strength (PS), viscoelasticity coefficient and water vapor permeability (WVP) of the films were found to be 565 N/mm, 35%, and 3.30 g mm/m² day kPa, respectively. Chitosan solution was exposed to gamma irradiation (0.1–5 kGy) and it was revealed that PS values were reduced significantly (p≤0.05) after 1 kGy dose and it was not possible to form films after 5 kGy. Monomer, 2-hydroxyethyl methacrylate (HEMA) solution (0.1–1%, w/v) was incorporated into the chitosan solution and the formulation was exposed to gamma irradiation (0.3 kGy). A 0.1% (w/v) HEMA concentration at 0.3 kGy dose was found optimal-based on PS values for chitosan grafting. Then radiation dose (0.1–5 kGy) was optimized for HEMA grafting. The highest PS values (672 N/mm) were found at 0.7 kGy. The WVP of the grafted films improved significantly (p≤0.05) with the rise of radiation dose.     

A versatile microfluidic chip for millisecond time-scale kinetic studies by electrospray mass spectrometry

An electrospray coupled microfluidic reactor for the measurement of millisecond time-scale, solution phase kinetics is introduced. The device incorporates a simple two-channel design that is etched into polymethyl methacrylate (PMMA) by laser ablation. The outlet of the device is laser cut to a sharp tip, facilitating low dead volume 'on chip' electrospray. Fabrication is fast, straightforward and highly reproducible, supporting rapid prototyping and large-scale reproduction. Device performance is characterized using a cytochrome c unfolding reaction. Unfolding processes with rates in excess of 30 s(-1) are easily measured, including the appearance of a 'native-like' intermediate that is maximally populated 180 ms post reaction initiation. To extract reliable rates from the data, a theoretical framework for the analysis of kinetics acquired under square-channel laminar flow is introduced.     

Time-resolved mass spectrometry for monitoring millisecond time-scale solution-phase processes

Many chemical and biochemical reactions equilibrate within a few seconds of initiation under "native" conditions. To understand the microscopic processes underlying these reactions, the most direct approach is to monitor the reaction as equilibrium is established (i.e. the reaction kinetics). However, this requires the ability to characterize the reaction mixture on the millisecond time-scale. In this review, we survey the contributions of time-resolved mass spectrometry (TR-MS) to the characterization of millisecond time-scale (bio)chemical processes, with a focus on biochemical applications. Compared to conventional time-resolved techniques, which use optical detection, the primary advantage of TR-MS is the ability to detect virtually all reactive species simultaneously. This provides a singularly high detail account of the reaction without the need for a chromophoric change on turnover or artificial chromophoric probes. To provide millisecond time-resolution, TR-MS set-ups usually employ continuous-flow rapid mixers, corresponding either to a fixed "tee" that provides a single reaction time-point or an adjustable position mixer that allows continuous reaction monitoring. TR-MS has been used to monitor processes with rates up to 500 s(-1) and to provide a detailed account of complex reactions involving 10 co- populated species. This corresponds to significantly lower time-resolution than optical methods, which can measure rates in excess of 900 s(-1) under ideal conditions, but substantially more detail (optical studies are typically limited to one or two analytes). TR-MS has been implemented on a number of platforms, including capillary and microfluidic set-ups. Capillary-based implementations are straightforward to fabricate and provide the most efficient rapid mixing. Microfluidic implementations have also been devised to enable multi-step experimental workflows that incorporate TR-MS. As a general method for time-resolved measurements, the applications for TR-MS are wide ranging. TR-MS has been used to identify intermediates in organic reactions, reveal protein (un)folding mechanisms, monitor enzyme catalysis in the pre-steady-state and, in conjunction with hydrogen-deuterium exchange, characterize protein conformational dynamics. While not without limitations, TR-MS represents a powerful alternative for measuring solution phase processes on the millisecond time-scale and a new, promising approach for revealing mechanistic details in (bio)chemical reactions.     

Heterocyclic dithiocarbazate iron chelators: Fe coordination chemistry and biological activity

The iron coordination and biological chemistry of a series of heterocyclic dithiocarbazate Schiff base ligands is reported with regard to their activity as Fe chelators for the treatment of Fe overload and also cancer. The ligands are analogous to tridentate heterocyclic hydrazone and thiosemicarbazone chelators we have studied previously which bear NNO and NNS donor sets. The dithiocarbazate Schiff base ligands in this work also are NNS chelators and form stable low spin ferric and ferrous complexes and both have been isolated. In addition an unusual hydroxylated ligand derivative has been identified via an Fe-induced oxidation reaction. X-ray crystallographic and spectroscopic characterisation of these complexes has been carried out and also the electrochemical properties have been investigated. All Fe complexes exhibit totally reversible Fe(III/II) couples in mixed aqueous solvents at potentials higher than found in analogous thiosemicarbazone Fe complexes. The ability of the dithiocarbazate Schiff base ligands to mobilise Fe from cells and also to prevent Fe uptake from transferrin was examined and all ligands were effective in chelating intracellular Fe relative to known controls such as the clinically important Fe chelator desferrioxamine. The Schiff base ligands derived from 2-pyridinecarbaldehyde were non-toxic to SK-N-MC neuroepithelioma (cancer) cells but those derived from the ketones 2-acetylpyridine and di-2-pyridyl ketone exhibited significant antiproliferative activity.     

Molecular hydrogen occupancy in binary THF-H2 clathrate hydrates by high resolution neutron diffraction

We have determined the time-space average filling of hydrogen molecules in a binary tetrahydrofuran (THF)-d(8) + D(2) sII clathrate hydrate using high resolution neutron diffraction. The filling of hydrogen in the lattice of a THF-d(8) clathrate hydrate occurred upon pressurization. The hydrogen molecules were localized in the small dodecahedral cavities at 20 K, with nuclear density from the hydrogen approximately spherically distributed and centered in the small cavity. With a formation pressure of 70 MPa, molecular hydrogen was found to only singly occupy the sII small cavity. This result helps explain discrepancies about the hydrogen occupancy in the THF binary hydrate system.     

Effect of Temperature Variation on the Characteristics of Microwave Power AlGaN/GaN MODFET

The prime motivation for developing the proposed model of AlGaN/GaN microwave power device is to demonstrate its inherent ability to operate at much higher temperature. An investigation of temperature model of a 1 μm gate AlGaN/GaN enhancement mode n-type modulation-doped field effect transistor (MODFET) is presented. An analytical temperature model based on modified charge control equations is developed. The proposed model handles higher voltages and show stable operation at higher temperatures. The investigated temperature range is from 100 °K–600 °K. The critical parameters of the proposed device are the maximum drain current (I_Dmax), the threshold voltage (V_th), the peak dc trans-conductance (g_m), and unity current gain cut-off frequency (f_T). The calculated values of f_T (10–70 GHz) at elevated temperature suggest that the operation of the proposed device has sufficiently high current handling capacity. The temperature effect on saturation current, cutoff frequency, and trans-conductance behavior predict the device behavior at elevated temperatures. The analysis and simulation results on the transport characteristics of the MODFET structure is compared with the previously measured experimental data at room temperature. The calculated critical parameters suggest that the proposed device could survive in extreme environments.     

Synthesis of covalently linked boron-dipyrromethene-chromophore conjugates using 3-bromo boron-dipyrromethene as a key precursor

3-Bromo boron dipyrromethene (3-bromo BODIPY) has been used as key synthon to prepare one ethynyl bridged and six ethynylphenyl bridged BODIPY-chromophore conjugates using mild Pd(0) coupling conditions. The chromophores possessing very distinct features, such as anthracene, BODIPY, terpyridine, porphyrin, Zn(II)porphyrin, 21,23-dithiaporphyrin and thiasapphyrin were connected at 3-position of boronboron-dipyrromethene dye by coupling of 3-bromo BODIPY with ethynyl or ethynylphenyl chromophore in toluene/triethylamine in the presence of catalytic amount of AsPh₃/Pd₂(dba)₃ at 40 °C followed by column chromatographic purification. The spectral studies indicated that the interaction is stronger in ethynyl bridged BODIPY-chromophore conjugate compared to ethynylphenyl bridged BODIPY-chromophore conjugates. The steady-state fluorescence indicated that in ethynyl bridged BODIPY-anthracene conjugate, the BODIPY unit act as energy acceptor and showed a possibility of energy transfer from donor anthracene unit to acceptor BODIPY unit on selective excitation of anthracene unit. However, in ethynylphenyl bridged BODIPY-porphyrin conjugates, the BODIPY unit act as energy donor and exhibited a possibility of singlet-singlet energy transfer from BODIPY unit to porphyrin unit.     

A methodology for estimating expected distances between nodes on a network

Transportation, distribution, and logistics professionals often need to estimate the distances that are used for the arc lengths between nodes on a network model. For example, a network model might be representative of roads and cities in which the actual distance from one city to the next may vary depending upon the actual source and destination within each of the respective cities. Hence, estimates for the arc lengths within the network model will contain error. This research presents two new models to estimate these inter-nodal distances for cases in which complete nodal representation of every source and destination is computationally prohibitive.     

Synthesis of MgCo2O4-coated Li4Ti5O12 composite anodes using co-precipitation method for lithium-ion batteries

Journal of Solid State Electrochemistry - In the present work, we report synthesis of MgCo2O4 (MCO)/Li4Ti5O12 (LTO) composites for Li-ion battery anodes by a co-precipitation method. The objective...