Simultaneous measurement of fluctuating velocity and pressure in the near wake of a circular cylinder

Simultaneous measurement of fluctuating velocity and pressure by a static-pressure probe and a hot-wire probe was performed in the near wake of a circular cylinder, in order to strengthen reliability of the measurement technique. Effect of geometry of the static-pressure probe was systematically investigated, and validity of the measurement results was addressed by quantitative comparison with reference data by a large-eddy simulation. Interference between the probes was found to mainly depend on the diameter of the pressure probe and only weakly on the length. A certain time lag between the velocity and pressure signals was detected in the experiment, and the measurement results of velocity–pressure correlation $\overline{up}$ and $\overline{vp}$ obtained with the correction of the time lag were in good agreement with the computational results. It was also found that the measurement of $\overline{vp}$ is extremely sensitive to a small time lag between the velocity and pressure signals, while that of $\overline{up}$ is not.     

Effect of the axial ligand on the reactivity of the oxoiron(IV) porphyrin π-cation radical complex: higher stabilization of the product state relative to the reactant state

The proximal heme axial ligand plays an important role in tuning the reactivity of oxoiron(IV) porphyrin π-cation radical species (compound I) in enzymatic and catalytic oxygenation reactions. To reveal the essence of the axial ligand effect on the reactivity, we investigated it from a thermodynamic viewpoint. Compound I model complexes, (TMP(+?))Fe(IV)O(L) (where TMP is 5,10,15,20-tetramesitylporphyrin and TMP(+?) is its π-cation radical), can be provided with altered reactivity by changing the identity of the axial ligand, but the reactivity is not correlated with spectroscopic data (ν(Fe═O), redox potential, and so on) of (TMP(+?))Fe(IV)O(L). Surprisingly, a clear correlation was found between the reactivity of (TMP(+?))Fe(IV)O(L) and the Fe(II)/Fe(III) redox potential of (TMP)Fe(III)L, the final reaction product. This suggests that the thermodynamic stability of (TMP)Fe(III)L is involved in the mechanism of the axial ligand effect. Axial ligand-exchange experiments and theoretical calculations demonstrate a linear free-energy relationship, in which the axial ligand modulates the reaction free energy by changing the thermodynamic stability of (TMP)Fe(III)(L) to a greater extent than (TMP(+?))Fe(IV)O(L). The linear free energy relationship could be found for a wide range of anionic axial ligands and for various types of reactions, such as epoxidation, demethylation, and hydrogen abstraction reactions. The essence of the axial ligand effect is neither the electron donor ability of the axial ligand nor the electron affinity of compound I, but the binding ability of the axial ligand (the stabilization by the axial ligand). An axial ligand that binds more strongly makes (TMP)Fe(III)(L) more stable and (TMP(+?))Fe(IV)O(L) more reactive. All results indicate that the axial ligand controls the reactivity of compound I (the stability of the transition state) by the stability of the ground state of the final reaction product and not by compound I itself.     

Asymmetric synthesis of isoquinuclidines by Diels–Alder reaction of 1,2-dihydropyridine utilizing a chiral Lewis acid catalyst

The chiral isoquinuclidine derivative, 2-azabicyclo[2.2.2]octane ring system, endo-(7R)-3 was obtained in good yield with excellent diastereoselectivity (up to 92% de) by Diels–Alder reaction of 1-(phenoxycarbonyl)-1,2-dihydropyridine 1 with N-acryloyl-(4S)-4-benzyloxazolidin-2-one (4S)-2 using titanium-(2R,3R)-TADDOLate 4 as a chiral Lewis acid catalyst in toluene at 0 °C. On the other hand, endo-(7S)-3 was obtained in good yield with excellent diastereoselectivity (up to 97% de) by Diels–Alder reaction of 1 with (4R)-2 using Cu(OTf)₂/(4S,4′S)-bis(oxazoline) catalyst 8 as a chiral Lewis acid catalyst in dichloromethane at 0 °C. In these reactions, the choice of solvent and the combination of titanium-(2R,3R)-TADDOLate 4 {or Cu(II)/(4S,4′S)-bis(oxazoline) 8} and dienophile (4S)-2 {or (4R)-2} are very important. The stereochemistry of endo-(7R)-3 has been established to be (1R,4S,7R) and the reaction mechanism is proposed.     

Fluorescent properties of coumarins with dual functions constructed by two sequential reactions

A series of coumarins with two aryl moieties was constructed from 3-azide-6-bromocoumarin scaffold by means of two sequential reactions, Huisgen 1,3-cycloaddition and Suzuki-Miyaura coupling reactions. Evaluation of their fluorescence properties indicated that the mode of fluorescent change by substituted group on each aryl group would be different. So this structure could be promising candidates as multi-analyte type fluorescent sensors, whose mode of spectroscopic changes, such as fluorescence intensity, and absorption or fluorescence maximum wavelength, are different for each analyte.     

Synthesis of arsenic graft adsorbents in pilot scale

Synthesis of arsenic (As) adsorbents in pilot scale was carried out with a synthesizing apparatus by radiation-induced graft polymerization of 2-hydroxyethyl methacrylate phosphoric acid monomer (PA), which consists of phosphoric acid mono- (50%) and di- (50%) ethyl methacrylate esters onto a nonwoven cotton fabric (NCF), and following chemical modification by contact with a zirconium (Zr) solution. The apparatus which was equipped with reaction tanks, a washing tank and a pump can produce up to 0.3 m×14 m size of the As(V) adsorbent in one reaction. A degree of grafting of 150% was obtained at an irradiation dose of 20 kGy with 5% of PA solution mixed with deionized water for 1 h at 40 °C. Finally, after Zr(IV) was loaded onto a NCF with 5 mmol/L of Zr(IV) solution, the graft adsorbent for the removal of As(V) was achieved in pilot-scale. The adsorbent which was synthesized in pilot scale was evaluated in batch mode adsorption with 1 ppm (mg/l) of As(V) solution for 2 h at room temperature. As a result, the adsorption capacity for As(V) was 0.02 mmol/g-adsorbent.     

Helical assembly of azobenzene-conjugated carbohydrate hydrogelators with specific affinity for lectins

Carbohydrate-mediated interactions are involved in various biological processes via specific molecular assembly and recognition. Such interactions are enhanced by multivalent effects of the sugar moieties, and thus supramolecular sugar-assembly, i.e., spontaneous association of glycoamphiphiles, is a promising approach to tailor glycocluster formation. In this study, novel sugar-decorated nanofibers were successfully prepared by self-assembly of low molecular weight hydrogelators composed of azobenzene and disaccharide lactones. Circular dichroism measurement of the as-prepared hydrogels indicated that the azobenzene amphiphile containing a lactose moiety possessed (R)-chirality, while the maltose-azobenzene conjugate exhibited (S)-chirality, even though the cellobiose-conjugated azobenzene existed in an achiral form. This suggests that the chiral orientation of the chromophoric azobenzene depended on both the glycosidic linkages and the steric arrangement of hydroxyl groups in the conjugated carbohydrates. Lectin-binding and cell adhesion assays revealed that the nonreducing ends of the conjugated sugar moieties were exposed on the surfaces of self-assembled nanofibrous hydrogels, allowing them to be effectively recognized by the corresponding lectins. In addition, photoisomerization of azobenzene under ultraviolet irradiation induced the sol-gel transitions of the hydrogels. These results demonstrate that the reversibly transformed fibrous glycohydrogels show potential for application as carbohydrate-decorated scaffolds for cell culture engineering.     

A light-induced phase exhibiting slow magnetic relaxation in a cyanide-bridged [Fe4Co2] complex

Single-molecule magnets: A cyanide-bridged hexanuclear complex showed a thermal electron-transfer-coupled spin transition centered at 220?K. Light irradiation at low temperature (LT; HT = high temperature) generated a metastable state showing slow magnetic relaxation in measurements of the alternating-current magnetic susceptibility (χ(m); see picture).     

Advantages and Potential of Lipid‐Membrane‐Incorporating Fullerenes Prepared by the Fullerene‐Exchange Method

Lipid‐membrane‐incorporating C₆₀ and C₇₀ (LMIC₆₀ and LMIC₇₀) were prepared by the fullerene‐exchange reaction from the γ‐cyclodextrin cavity to vesicles (we call this method the “exchange method”). An advantage of this method is that the ratios of [C₆₀]/[lipids] and [C₇₀]/[lipids] can be arbitrarily controlled by adjusting the ratios of the fullerenes and liposome. The maximum ratio (30 mol %) obtained was approximately 14 and 100 times higher than those achieved for LMIC₆₀ and LMIC₇₀, respectively, that were prepared by the classical method, which we call the “premixing method” (dissolving lipids and C₆₀ or C₇₀ in chloroform, followed by concentration and extraction with water). Furthermore, the stabilities and photodynamic activities of the LMIC₆₀ and LMIC₇₀ solutions prepared by the exchange method were shown to be much higher than those prepared by the premixing method. That is, the exchange method was found to be superior to the premixing method as a preparative method of LMIC₆₀ and LMIC₇₀ for applications in photomedical and photomaterials chemistry.     

Aggregation of 1-dodecyl-3-methylimidazolium nitrate in water and benzene studied by SANS and 1H NMR

Aggregation of imidazolium-based ionic liquid, C(12)mim(+)NO(3)(-), in both polar solvent of water and nonpolar solvent of benzene was elucidated by electrical conductivity, small-angle neutron scattering (SANS), and (1)H NMR measurements. The electrical conductivities of C(12)mim(+)NO(3)(-)-water solutions at 298 K as a function of ionic liquid concentration showed a break point at 8.4 mmol dm(-3) as a cmc. However, those of C(12)mim(+)NO(3)(-)-benzene solutions drastically increase in accordance with a cubic function of concentration, but without a break point. The SANS profiles of both aqueous and benzene solutions obviously differ from each other. The profiles of the aqueous solutions indicated the formation of polydisperse spherical micelles. Those of the benzene solutions revealed Ornstein-Zernike behavior. Thus, C(12)mim(+)NO(3)(-) forms clusters in the benzene solutions, but the shape of clusters is indefinite. On the basis of the (1)H NMR chemical shifts of the aqueous solutions, the effect of nitrate on the formation of micelles was discussed on a microscopic scale. Furthermore, the interactions among C(12)mim(+), NO(3)(-), and benzene molecules in the benzene solutions were considered according to the (1)H NMR data.