Beam profile monitor for annihilation cross section measurements of antiprotons at 100 keV

The ASACUSA (the Atomic Spectroscopy And Collisions Using Slow Antiprotons) collaboration is planning to measure the cross sections of antiproton annihilations at kinetic energy 100 keV on targets of various mass numbers (C,?Ni, Sn, and Pt) using the Antiproton Decelerator (AD) of CERN. No previous measurement exists in this region where the A-dependence of the cross section is expected to deviate from the A $^{\frac{2}{3}}$ (Batty et al, Nucl Phys A 689:721, 2001) as reported by the Obelix collaboration. A beam profile monitor based on secondary electron emission with a grid of electrode pads fabricated on an FR4-type glass-epoxy circuit board was developed for this measurement. The advantage of this kind of detector is that it is simple, lightweight, and low cost. It was used to measure the spatial profile of 100-ns-long beam pulses containing > 6 × 10⁴ antiprotons with an active area of 40?mm?× 40 mm and a spatial resolution of 4 mm.     

Lanthanide-assisted NMR evaluation of a dynamic ensemble of oligosaccharide conformations

A novel methodology is presented for evaluating a dynamic ensemble of oligosaccharide conformations by lanthanide-assisted NMR spectroscopy combined with molecular dynamics (MD) simulations. The results obtained using the GM3 trisaccharide demonstrated that pseudocontact shift measurements offer a valuable experimental tool for the validation of MD simulations of highly flexible biomolecules.     

Is CO2 fixation promoted through the formation of DBU bicarbonate salt?

The bicyclic amidines, 1,8‐diazabicyclo [5.4.0]undec‐7‐ene (DBU) and 1,5‐diazabicyclo[4.3.0] non‐5‐ene (DBN), were used for the chemical fixation of carbon dioxide. The promotion for CO₂ fixation is often reported through the formation of a thermally unstable DBU or DBN bicarbonate salt. To examine the effects of the DBU or DBN bicarbonate salt, reactions of 2‐aminobenzonitrile with the DBU salt or DBN salt in dimethylformamide (DMF) were performed at 20°C for 24 h in argon or carbon dioxide (0.1 MPa). However, in all the cases, 1H‐quinazoline‐2,4‐dione was not obtained completely. In contrast with room temperature reactions, 2‐aminobenzonitriles and DBU bicarbonate salt in DMF reacted for 4 h under high temperature (80°C) and CO₂ atmosphere (0.1 MPa) gave 1H‐quinazoline‐2,4‐diones in good to excellent yields. At high‐temperature conditions, DBU bicarbonate salt is decomposed to DBU and carbon dioxide. Also, the carbonylation of 2‐aminobenzonitrile using DBU and carbon dioxide afforded 1H‐quinazoline‐2,4‐dione in good yields under similar reaction conditions. These results suggest that the combination of DBU or DBN as a strong base and carbon dioxide is much more important than the in situ formation of DBU or DBN bicarbonate salt for the acceleration of CO₂ fixation. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:276–280, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21014     

Perovskite-to-postperovskite transitions in NaNiF3 and NaCoF3 and disproportionation of NaCoF3 postperovskite under high pressure and high temperature

High-pressure structural phase transitions in NaNiF(3) and NaCoF(3) were investigated by conducting in situ synchrotron powder X-ray diffraction experiments using a diamond anvil cell. The perovskite phases (GdFeO(3) type) started to transform into postperovskite phases (CaIrO(3) type) at about 11-14 GPa, even at room temperature. The transition pressure is much lower than those of oxide perovskites. The anisotropic compression behavior led to heavily tilted octahedra that triggered the transition. Unlike oxide postperovskites, fluoropostperovskites remained after decompression to 1 atm. The postperovskite phase in NaCoF(3) broke down into a mixture of unknown phases after laser heating above 26 GPa, and the phases changed into amorphous ones when the pressure was released. High-pressure and high-temperature experiments using a multianvil apparatus were also conducted to elucidate the phase relations in NaCoF(3). Elemental analysis of the recovered amorphous samples indicated that the NaCoF(3) postperovskite disproportionated into two phases. This kind of disproportionation was not evident in NaNiF(3) even after laser heating at 54 GPa. In contrast to the single postpostperovskite phase reported in NaMgF(3), such a postpostperovskite phase was not found in the present compounds.     

Synthesis of Dendrimer-Like Star-Branched Poly(methyl methacrylate)s of Generations Consisting of Four Branched Polymer Chains at Each Junction by Iterative Methodology Involving Coupling and Transformation Reactions

A series of dendrimer-like star-branched poly(methyl methacrylate)s (PMMA)s of generations consisting of four branched segments at each junction have been successfully synthesized by developing an iterative methodology. It involves two reaction steps in each iterative reaction sequence, (a) a coupling reaction of the α-functionalized living anionic PMMA with four tert-butyldimethylsilyloxymethylphenyl (SMP) groups with benzy bromide (BnBr)-chain-functionalized PMMA and (b) a transformation of SMP group into BnBr functionality. By repeating the reaction sequence thrice, the above-mentioned dendrimer-like star-branched (PMMA)s of up to third-generation made up of 4, 20, and 84 PMMA segments and 16, 64, and 256 BnBr termini were synthesized by the first, second, and third iterative processes, respectively. The resulting polymers all were well-defined in branched architecture and precisely controlled in chain length.     

Kinetic solvent effects in the reactions of diphenyldiazomethane with electron acceptors. Correlation between electron affinities and the slopes of the plots of log k vs solvent basicity parameter, Dπ

Kinetic study of the reactions of diphenyldiazomethane with various electron acceptors were made in six aromatic solvents. Log k were correlated with the solvent basicity parameter, D_π, and the regression slopes were found to be a function of electron affinities.     

Two conformers of 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene spiro‐linked with homobenzoquinone epoxide

The crystal structures of the two thermally equilibrated conformational isomers of the epoxide 1′,5′‐dimethyl­spiro[10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene‐5,8′‐4′‐oxatricyclo[5.1.0.0^3,5]octane]‐2′,6′‐dione, C₂₃H₂₀O₃, have been determined by X‐ray diffraction. In the tricyclic dione skeleton, the oxirane and cyclo­propane rings adopt an anti structure with respect to the conjunct quinone frame. The spiro‐linked 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene ring of the major isomer has a fairly twisted boat form, folding opposite to the adjoining cyclo­propane methyl substituent, whereas the seven‐membered ring of the minor isomer has an almost ideal twist–boat form, inversely folding to the side of the relevant methyl group. The conformational structures of these isomers have been compared with those of the corresponding isomers of the unepoxidized homobenzoquinone.