Effects of carboxyl groups on the adsorption behavior of low-molecular-weight substances on a stainless steel surface

The adsorption isotherms of various carboxylic acids and several amines on a stainless steel surface were taken as a function of pH and the ionic strength of the solution at 30 degrees C. In particular, the effect of the number of carboxyl groups on the adsorption behavior was investigated. Monocarboxylic acids such as benzoic acid and n-butyric acid were reversibly adsorbed on the stainless steel particles and showed a Langmuir-type adsorption isotherm, i.e., Q=KqmC/(1+KC), where Q and C are, respectively, the amount of adsorbate adsorbed and the equilibrium concentration in the bulk solution, qm, the maximum adsorbed amount, and K is the adsorption equilibrium constant. Carboxylic acids having plural carboxyl groups had much higher affinity to the surface and were adsorbed in both reversible and irreversible modes. The adsorption isotherms for the carboxylic acids having plural carboxyl groups could be expressed by a modified Langmuir-type adsorption isotherm, i.e., Q=q(irrev)+Kq(rev)C/(1+KC), where q(irrev) and q(rev) are, respectively, the maximum amounts adsorbed irreversibly and reversibly. The K and q(irrev) values increased with an increase in the number of carboxyl groups except for isophthalic acid and terephthalic acid. On the basis of the pH dependencies of K, qm, q(irrev), and q(rev) as well as the surface properties of the stainless steel, both reversible and irreversible adsorptions were considered to occur through the electrostatic interaction between negatively charged carboxyl groups and the positively charged sites on the surface. The dependency of the q(irrev) value on ionic strength was discussed on the basis of the differences in their adsorbed state with the interaction forces to the surface and repulsive forces among the adsorbed molecules. The adsorption of amine components was quite weak. The RA-IR and molecular dynamics calculation were done to investigate the adsorption states of phthalic acid, trimellitic acid, and mellitic acid.     

Rhodium-catalyzed enantioselective [2+2+2] cycloaddition of diynes with unfunctionalized alkenes

A chiral rhodium complex catalyzed an enantioselective [2+2+2] cycloaddition of unsymmetrical diynes with norbornene, and tetracyclic products were obtained in good to excellent ee. The cycloaddition of a symmetrical diyne with styrene derivatives as coupling partners gave bicyclic products in good ee.     

Cyclic isothioureido compounds. II. Reaction of trans-3a,4,5,9b-tetrahydronaphth[1,2-d]-imidazoline-2-thiones with α-bromoketones

The reaction of trans-3a,4,5,9b-tetrahydronaphth[1,2-d]imidazoline-2-thiones ( 8 ) with α-bromoketones gave, depending upon the structure of the α-bromoketones, reaction solvent and reaction temperature, the hydrobromides of tetrahydronaphth[1,2-d]imidazolin-2-ylthiomethyl ketone ( 10 ), hexahydro-8-hydroxynaphth[1′,2′:4,5]imidazo[2,1-b]thiazoles ( 5, 11, 19 and 20 ) or tetrahydronaphth[1′,2′:4,5]imidazo[2,1-b]-thiazoles ( 12 and 16 ). Structural determinations based on ir and nmr spectroscopies are discussed.     

Dynamic analyses on induced-fit gaseous guest binding to organic crystals with a quartz-crystal microbalance

The inclusion behavior of gaseous guest molecules in a solid apohost, an orthogonal anthracene-bis(resorcinol)tetraol (1), was investigated with a quartz-crystal microbalance (QCM). Compound 1 forms crystals composed of molecular sheets bound together by an extensive hydrogen-bonded network. An apohost of 1 was cast onto a QCM and the binding of gaseous guest molecules was followed as a function of time by observing the decrease in the oscillation frequency, which is directly related to the increase in mass. Ethyl acetate and methyl ethyl ketone were significantly included into the apohost, whereas benzene and cyclohexane were simply adsorbed onto the surface of the solid; all these guests have similar vapor pressures at 25 degrees C. On the other hand, a host analogue 2, a tetramethoxy derivative of 1, barely included these guest molecules. The inclusion amount and the rate of inclusion of ethyl acetate or methyl ethyl ketone showed a drastic increase above a threshold concentration of guests in the gas phase. Thus, the structure of the apohost changed cooperatively in order to bind guest molecules above the threshold guest concentration. This cooperativity of the binding behavior was kinetically analyzed.     

Synthesis and properties of novel polysulfone bearing exomethylene structure

A novel polysulfone bearing exomethylene structure in the main chain was obtained by oxidation of polysulfide prepared by radical ring-opening polymerization of an eight-membered cyclic allyl sulfide, although the corresponding sulfone monomer was not polymerized at all. The thermal behaviors and the crystalline characters of the polysulfone and polysulfide are compared.     

Strained-Ring and Double-Bond Systems Consisting of the Group 14 Elements Si,Ge, and Sn

The organometallic chemistry of the Group 14 elements E = Si, Ge, Sn in the 1980's is highlighted by the successful construction and characterization of three systems previously thought to be too reactive to exists: (1) three-membered ring compounds including cyclotrisilane, cyclotrigermane, and cyclotristannane, (2) molecules containing E? E double bonds including disilene, digermene, and distannene, and (3) strained polycycles containing a skeleton of Group 14 elements, such as bicyclo[1.1.0]tetrasilane, hexagemaprismane, and octasilacubane. The majority of these numerous compounds now available are fully substituted with bulky ligands to suppress the reactivity intrinsic to the systems. These compounds permit examinations of (1) the variation of physical and chemical properties of a system with these elements and also with the ligands and (2) how two systems are interrelated thermally and photochemically with the intermediacy of the divalent (carbene-like) species. Theoretical calculations on virtually all of the parent compounds discussed in this review are evaluated alongside the experimental results. Some polycycles may constitute a stepping-stone on the way to compounds with a triple bond.     

Synthesis, characterization, and detailed electrochemistry of binuclear ruthenium(III) complexes bridged by bisacetylacetonate. Crystal and molecular structures of [[Ru(acac)2]2(tae)] (acac = 2,4-pentanedionate ion, tae = 1,1,2,2-tetraacetylethanate dianion)

Binuclear beta-diketonatoruthenium(III) complexes [[Ru(acac)(2)](2)(tae)], [[Ru(phpa)(2)](2)(tae)], and [(acac)(2)Ru(tae)Ru(phpa)(2)] and binuclear and mononuclear bipyridine complexes [[Ru(bpy)(2)](2)(tae)](PF(6))(2) and [Ru(bpy)(2)(Htae)]PF(6) (acac = 2,4-pentanedionate ion, phpa = 2,2,6,6-tetramethyl-3,5-heptanedionate ion, tae = 1,1,2,2-tetraacetylethanate dianion, and bpy = 2,2'-bipyridine) were synthesized. The new complexes have been characterized by (1)H NMR, MS, and electronic spectral data. Crystal and molecular structures of [[Ru(acac)(2)](2)(tae)] have been solved by single-crystal X-ray diffraction studies. Crystal data for the meso isomer of [[Ru(acac)(2)](2)(tae)] have been confirmed by the dihedral angle result that two acetylacetone units of the bridging tae ligand are almost perpendicular to one another. A detailed investigation on the electrochemistry of the binuclear complexes has been carried out. The electrochemical behavior details of the binuclear complexes have been compared with those of the mononuclear complexes obtained from the half-structures of the corresponding binuclear complexes. Studies on the effects of solvents on the mixed-valence states of Ru(II)-Ru(III) and Ru(III)-Ru(IV) complexes have been carried out by various voltammetric and electrospectroscopic techniques. A correlation between the comproportionation constant (K(c)) and the donor number of the solvent has been obtained. The K(c) values for the binuclear complexes have been found to be low because of the fact that two acetylacetone units of the bridging tae ligand are not in the same plane, as revealed by the crystal structure of [[Ru(acac)(2)](2)(tae)].     

Macroporous Morphology of the Titania Films Prepared by a Sol-Gel Dip-Coating Method from the System Containing Poly(Ethylene Glycol). II. Effect of Solution Composition

The influences of water and alkoxide concentrations, as well as the relative humidity upon the macroporous morphology of the titania (TiO2) films have been studied for a sol-gel dip-coating system containing poly(ethylene glycol) (PEG). The distribution of resultant morphology against the withdrawal speed and relative humidity is varied significantly by mainly modifying the polycondensation and phase separation processes during the dipping operation, even by the small change in starting composition of the dipping solution.