Antithrombogenicity of cultured endothelial cell-detached surface

To examine the antithrombogenicity of cultured endothelial cell-detached surface, a simple hybrid vascular model tube consisting of a glass tube and endothelial cells was constructed. To detach the endothelial cells from the inner surface of the model tube, a steady shear stress of 2 or 8 N m(-2) was imposed onto the surface of endothelial cell monolayer by means of a coaxial double cylinder rotational-type apparatus. Coagulation of blood in contact with the endothelial cell-detached surface was examined using a damped oscillation rheometer. Coagulation of whole blood in the cell-detached tube occurred at about 40 min, which was almost the same as that in the endothelial cell-coated tube. A few platelets without shape change adhered to the endothelial cell-detached surface. These data suggest that the endothelial cell-detached surface may exhibit antithrombogenic and anticoagulant surfaces. Biochemical analyses showed that the glass surface, where endothelial cell was detached, was covered with components such as collagen type IV that is considered to be produced from the endothelial cells on the glass surface.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.     

Rheology of PVC plastisol--VI: criteria for yielding and fracture of an immobilized layer

PVC plastisol exhibits pseudo-plastic flow in steady shear; that is, viscosity decreases with the increasing shear rate. At higher shear rates viscosity reaches a minimum and then increases, i.e., dilatant behavior. Previously, pseudo-plastic behavior was explained by a mechanism in which the suspended particles partition into an immobilized layer and a mobile phase. The development of the immobilized layer with the increase in shear rate was shown to quantitatively account for pseudo-plastic behavior. In higher shear rates dilatation of the immobilized layer was shown to be the cause of dilatacy. At even higher shear rates the immobilized layer fractures. In this paper the viscosity minimum was interpreted as the yielding of the immobilized layer. Subsequently, data in the literature were analyzed to find criteria for the yielding and fracture of the immobilized layer. Yielding was found to obey Coulomb's criterion, from which the coefficient of friction and the cohesive strength of the immobilized layer were evaluated. These properties were controlled by the nature of particle assembly in the immobilized layer and the plasticizer type had only a minor effect. The value of the coefficient of friction was on the lower side and within the range of values found in the literature for other materials. There were two modes of fracture of the immobilized layer, one with low strength, low strain to break, and the other with high strength, high strain to break. The former is analogous to the brittle fracture of solids and the latter ductile failure. The strength of brittle fracture was somewhat higher than cohesive strength, which was evaluated from yielding data. This is akin to Griffith's criterion for brittle fracture of a solid. Ductile failure occurred when the shear stress exceeded normal stress.     

Effect of syndiotacticity on the aqueous poly(vinyl alcohol) gel 3. Mechanical property of gel

Summary The mechanical property of aqueous gel was studied using the PVA having the content of syndiotacticity in diad from 58.4 and 66.2%. The elastic modulus of gels was 105–106 dyne/cm2 and the variation of the elastic modulus of gel with the rise of temperature was corresponded with the variation of the concentration of PVA in gel accompanying syneresis. The elastic modulus of gel having the same content of syndiotacticity and concentration of PVA increased in the order as follows, the first is the gel chilled at room temperature, the second is the gel chilled at 60 °C and last is the gel chilled at 0 °C. The variation of the elastic modulus of gel with the rise of temperature became smaller with increasing content of syndiotacticity. The increase of elastic modulus is considered to be attributed to the further growth of stronger junctions through the recrystallization followed by syneresis rather than the entropic effect of polymer networks with the rise of temperature.

---

Zusammenfassung Es wurden die mechanischen Eigenschaften wßriger Gele aus Polyvinylalkohol untersucht, mit Gehalten an Syndioaktizität in Diaden zwischen 58,4 und 66,2%. Die elastischen Moduln der Gele lagen bei 105 bis 106 dyn/cm2 und die Variation der elastischen Moduln der Gele mit Steigerung der Temperatur entsprach der Konzentrationsänderung von Polyvinylalkohol im Gele gemäß der stattgefundenen Synärese. Der elastische Modul des Gels mit konstantem Gehalt an Syndiotaktizität und Konzentration des PVA steigen in folgender Weise: Zuerst das Gel abgekühlt bei Raumtemperatur, dann das Gel abgekühlt bei 60 °C und zuletzt das Gel erstarrt bei 0 °C. Die Variation der elastischen Moduln mit steigender Temperatur wird kleiner mit steigendem Gehalt an Syndiotaktizität. Das Anwachsen der Moduln sollte vermutlich dem weiteren Wachstum strengerer Kopp lungen durch Rekristallisation infolge der Synärese zuzuschreiben sein mehr als einem Entropieeffekt der polymeren Netzwerke mit steigender Temperatur.

---

---

With 6 figures and 2 tables

---

Part 2. cf. reference 2.     

Electronic spectra of Hafner's hydrocarbons

Electronic structures and spectra of Hafner's hydrocarbons have been calculated by means of the semi-empirical SCF CI MO method incorporated with the variable bond-length technique. The results are in good agreement with experimental data.     

Thermotropic copolyamides from triethyleneglycol bis (4-carboxyphenyl) ether,aromatic diamines,and p-aminobenzoic acid

It is proposed that depression of the transition temperatures, especially the melting point (T_m), can be achieved by the introduction of a different amide bond structure into the copolyamides of dicarboxylic acids and diamines by copolymerization of aminocarboxylic acids, such as p-aminobenzoic acid. The effect was examined by the amount and distribution of the structure in the copolylamindes. Copolycondensations of PEG₃, p-aminobenzoic acid, and diamines with different chain lengths showed that the structural change of the amide bond in the copolymers, especially its distribution, was more important than its total amount in them. Several types of aminocarboxylic acids were briefly examined to study the effect. © 1994 John Wiley & Sons, Inc.     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Synthetic studies of proanthocyanidins. Part 3: Stereoselective 3,4-cis catechin and catechin condensation by TMSOTf-catalyzed intramolecular coupling method

TMSOTf-catalyzed intramolecular condensation for catechin and epicatechin units are described. A potential electrophile and a nucleophile were connected with diester linkers and TMSOTf-catalyzed condensation was examined. In comparison with intermolecular catechin and catechin condensation, the intramolecular condensation required high reaction temperature and reversed 3,4-cis product was obtained. The condensed product was transformed into the natural 3,4-cis (+)-catechin-(4β→8)-(+)-catechin dimer.     

Mechanism of gold adsorption by persimmon tannin gel.

Gold adsorption by persimmon tannin (PT) gel from a solution containing hydrogen tetrachloroaurate(III) was examined. A flow-rate examination in a column system indicated the reduction of Au(III) ion to Au(0). XRD patterns clarified the existence of Au(0) on the gel which adsorbed gold. The gel could also adsorb colloidal Au(0) prepared independently. A model consisting of ligand exchange, Au(III) reduction to Au(0), and resulting Au(0) adsorption by PT gel was presented for the gold adsorption mechanism.