Electron correlations and transport effective mass in narrow-band systems and the Hubbard model

The Hubbard model is rederived from a tight-binding band calculation, showing that, as long as parameters are properly chosen, the model is justified for calculating electronic properties of narrow-band systems. The treatment is extended by including correlations and it was found that bound solutions called dimers exist. The concept of dimers is found to be very powerful for understanding the unusual properties of heavy fermion systems. However, a Mott-Hubbard-like model may be required to calculate properties of high T_c cuprates. © 1994 John Wiley & Sons, Inc.     

A highly diastereoselective pinacol coupling reaction of aldehydes and ketones using low-valence niobium generated from Nb(V)

A simple method for the diastereoselective synthesis of racemic 1,2-diol mediated by low-valence niobium generated in situ is described. A 1,4-dioxane-toluene solvent system was found to be essential to achieve higher selectivities and to prevent other reactions of pinacols, such as deoxygenation and acetal formation. Aromatic aldehydes and ketones were converted to the corresponding pinacols with up to 97 and 85% de, respectively.     

Analysis to obtain precise density fluctuation of supercritical fluids by small-angle X-ray scattering

A procedure of analysis for small-angle X-ray scattering (SAXS) data has been established to obtain density fluctuation of supercritical fluids near the critical point. It is indispensable for the certain analysis to utilize both of high-quality SAXS data measured under stable thermodynamic condition and accurate P–ρ–T data in supercritical region. As a standard example, SAXS measurements have been performed for supercritical CO₂, which is a suitable sample satisfying the condition for both experiment and analysis. The measurements were carried out along four isothermal conditions at reduced temperature of T_r = T/T_c = 1.020, 1.022, 1.043 and 1.064. Comparing the experimental density fluctuation with calculated one from the most reliable equation of state, the differences are within 8% at most.     

Effect of polycondensation methods on molecular weight distribution of nylon 610

Polycondensation methods greatly influence the molecular weight distribution of poly(hexamethylene sebacamide) (nylon 610) as determined by gel permeation chromatography (GPC). The ratio of weight average molecular weight to number average molecular weight (M_w/M_n) was used as a measure for estimating the molecular weight distribution. The M_w/M_n ratios of nylon 610 obtained from melt, solid phase, and high temperature polycondensation methods were 2 to 3.5, which were expected values for the most probable distribution. However, those for polymers obtained from the direct polycondensation in the presence of triphenylphosphine, interfacial polycondensation and low temperature polycondensation using an acid chloride varied over a wide range from 3.5 to 8.5. The effect of the kind of organic solvents in the interfacial method on the M_w/M_n ratios was especially large, and the molecular weight distribution could be controlled to some extent by selecting an appropriate solvent.     

Fluorescence immunological determination of immunoglobulin G in human serum by high-performance liquid gel-permeation chromatography

Summary A high-performance liquid gel-permeation chromatographic method is described for the determination of human serum immunoglobulin G (IgG) by separating the fluorescent immuno complex from the free fluorescence-labeled antibody. Fluorescence-labeled antibody used in this study was fluorescein isothiocyanate (FITC)-labeled Fab fragment goat anti-human IgG (anti-IgG Fab). Immuno complexes and antibody of different molecular sizes can be separated. FITC-labeled anti-IgG Fab was added to the serum and the mixture is passed through the column. An immuno complex separates as well-delineated peak in the column void volume, and was measured by the fluorescence of the column eluate (Ex=490nm, Em=520nm). The total analysis time for a serum sample was approximately 15min. The minimum detection limit was 25 mg/dl. The relative standard deviation was below 2% (peak area). The results of the HPL-GPC analysis correlate well with those obtained by laser nephelometric assay (r=0.992).     

Conversion electron Mössbauer spectroscopy using a CAMAC data acquisition system (KODAQ)

For simple depth selective conversion electron Mössbauer spectroscopy (CEMS) by using a He+CH₄ proportional counter, a flexible and versatile CAMAC data acquisition system (KODAQ) which works on a popular Japanese personal computer PC9801VX (NEC) was applied. It is demonstrated that CEM spectra of the oxidized Fe thin film which is composed of Fe₃O₄, Fe_1–xO and -Fe metal are successfully obtained.     

o-Phenylene halocarbenonitrenes and o-phenylene chlorocarbenocarbene: a combined experimental and computational approach

[reaction: see text] Computations find that o-phenylene(halo)carbenonitrenes 2-XN, X = F, Cl, Br, have quinoidal singlet biradical ground states such as the parent o-phenylenecarbenonitrene (2-HN). Compared to the parent 2-HN, halogen substitution stabilizes the A' states relative to the A' ones. Halogen substitution also affects the barrier and exothermicity of the ring-opening reaction (to form unsaturated nitriles 4-XN, X = F, Cl, Br), but it has a smaller effect on the ring-closing reaction (to form benzo(aza)cyclobutadiene 3-XN, X = F, Cl, Br). Attempts to generate and observe the o-phenylene(halo)carbenonitrenes 2-XN, X = F, Cl, Br, using matrix isolation spectroscopy under conditions similar to those of the successful observation of 2-HN failed. Instead, the observed photoproducts were a mixture of 3-XN and 4-XN. In each case, the major product of the mixture appears to be the thermodynamically more stable one. In the case of X = Br, the observed mixture contains an additional component that is postulated to be Z-6-BrN. o-Phenylenechlorocarbenocarbene is also computed to have a quinoidal singlet biradical ground state and relatively stabilized A' excited states. Attempts to generate the biscarbene under matrix isolation conditions led to the detection of benzochlorocyclobutadiene (3-ClC), small amounts of the ring-open product (dienediyne 4-ClC), and cycloalkyne 5-ClC. Computations suggest that the formation of 5-ClC implies the generation of Z-6-ClC, which is analogous to the formation of Z-6-BrN from 2-BrN.     

CYP119 plus a Sulfolobus tokodaii strain 7 ferredoxin and 2-oxoacid:ferredoxin oxidoreductase constitute a high-temperature cytochrome P450 catalytic system

The cytochrome P450 superfamily of enzymes catalyzes a broad range of oxidative processes involved in the metabolism of fatty acids, biosynthesis of sterols, and elimination of drugs and xenobiotics. Application of the unique properties of P450 enzymes as fine biocatalysts in biotechnology is limited due to their thermal instability and the requirement for auxiliary electron-donor proteins and cofactors. CYP119, a thermophilic P450 enzyme from Sulfolobus solfataricus, was characterized some time ago, but no high-temperature redox partners have been available for it. Here we report reconstitution of CYP119 with a novel high-temperature electron-donor system consisting of a ferredoxin and 2-oxoacid:ferredoxin oxidoreductase from Sulfolobus tokodaii strain 7 that, unlike all other known P450 electron-donor partners, utilizes coenzyme-A and pyruvic acid rather than NADH or NADPH as the source of electrons. The oxidation of lauric acid by the reconstituted system increased 16-fold as the temperature increased from 25 to 70 degrees C and was functional for more than 30 min at the higher temperature. This first in vitro high-temperature P450 catalytic system is a key step in the development of practical high-temperature monooxygenase systems.     

Transformation of thioacetals to cyclopropanes

Cyclopropanes were obtained by the titanocene(II)-promoted reaction of thioacetals with vinyl pivalate. It was also found that vinycyclopropanes were produced by a similar treatment of thioacetals with the titanocene(II) species in the presence of 1,3-dienes.     

Hydrogenation of benzaldehyde and cinnamaldehyde in compressed CO2 medium with a Pt/C catalyst: a study on molecular interactions and pressure effects

The hydrogenation of benzaldehyde and cinnamaldehyde has been studied with a 5% Pt/C catalyst in compressed CO(2). The effect of CO(2) pressure on the total conversion was found to be different between the two aldehydes. The total conversion of benzaldehyde merely decreases with increasing CO(2) pressure, while that of cinnamaldehyde shows a maximum at a certain pressure. High-pressure FTIR measurements indicate the existence of interactions of CO(2) with the aldehydes. The absorption of nu(C=O) red-shifts at increasing CO(2) pressure, and this red-shift is more significant for cinnamaldehyde than for benzaldehyde, indicating that the C=O bond of the former becomes more reactive than the latter. The difference in the mode of interactions of CO(2) with these aldehydes has also been indicated by changes of nu(C=O) of CO(2). Thus, the conversion of benzaldehyde will decrease with increasing CO(2) pressure because of a simple dilution by introducing a larger quantity of CO(2). For cinnamaldehyde, the conversion will increase at low pressures because of increasing interactions with CO(2) molecules (increasing the reactivity of the C=O bond) but decrease at high pressures because of the simple dilution effect, similar to the case of benzaldehyde. The dense CO(2) molecules are not likely to change the catalytic activity of supported Pt particles, which was previously suggested from optical absorption of supported fine metal (Au) particles in a compressed CO(2) medium.