Estimation of electrophoretic mobilities of red blood cells in 1-G and microgravity using a miniature capillary electrophoresis unit

Electrophoretic mobilities of red blood cells (RBCs) were measured in microgravity using a home-made capillary electrophoresis unit, which consisted of two small reservoirs of 0.6 mL and a fused-silica capillary tubing with 2 cm in length and 50 num in inner diameter. Migration of RBCs was observed by a microscope at 1000 times magnification and recorded on a videotape. The experiments were performed during stays in microgravity (about 0.01 G), which lasted 20 s and were attained by parabolic flights of an aircraft. On average, the electrophoretic mobilities of RBCs determined in microgravity were about 30% higher than those measured at 1-G condition irrespectively whether the cells were suspended in saline or serum during measurements. This difference might be explained as being mainly due to the cell floating in microgravity. Morphological changes of RBCs may contribute partly to the difference, while the variation in viscosity of the medium under microgravity could play only a minor role.     

Immobilization of ultra-thin layer of monoclonal antibody on glass surface

When preparing an affinity column and a biosensor, it is desirable to immobilize a unimolecular layer of pure protein on a matrix. In this work, we tried to immobilize a monoclonal antibody on a surface of a glass test-tube as a model, to confirm the stability of this ultra-thin layer by an enzyme immunoassay, and to estimate the thickness of the layer on a slide glass by Fourier transform infrared reflection spectrometry. A new test-tube was washed and dried. The tube was filled with 5% 3-aminopropyltriethoxysilane. The 3-aminopropylsilylated surface was treated with glutaraldehyde and 5.6.10(-2) mg/ml solution of a normal mouse monoclonal antibody. The Schiff base between glutaraldehyde and the antibody was further reduced with 7.9.10(-3)% NaBH4. The tube was washed with 0.05% Tween 20 to block non-specific binding. The antibody immobilized on the surface was measured by an enzyme immunoassay based on a reaction of anti-mouse immunoglobulin G labelled with alkaline phosphatase, with which p-nitrophenol was produced from p-nitrophenylphosphate as a substrate. Meanwhile, various amounts of the antibody were immobilized on slide glasses in the same manner. The antibody on each surface was measured by Fourier transform infrared reflection spectrometry. The antibody immobilized under the final conditions was detectable by the enzyme immunoassay, and stable at 4 degrees C for ten days. The antibody on the slide glass was a unimolecular layer, as judged from the Fourier transform infrared spectra referred to -CONH- band semiquantitatively. Thus, we found the optimal conditions for immobilizing an ultra-thin layer of the monoclonal antibody on the glass surface.(ABSTRACT TRUNCATED AT 250 WORDS)     

Studies on stable free radicals. XIX. Copolymerization of N-oxyl biradical with α-chloro-p-xylylene

Copolymerization of N-oxyl biradical with α-chloro-p-xylylene was carried out by varying the feed ratio of α,α′-dichloro-p-xylene which was the precursor of α-chloro-p-xylylene. The structures of the obtained copolymers were determined spectroscopically. The results that the N-oxyl attacked the carbon-bearing chlorine atom of α-chloro-p-xylylene suggest a nucleophilic reactivity of N-oxyl radical. The copolymerization process was also discussed.     

Theoretical (DFT, GIAO-NMR, NICS) study of carbocations (M+H)+, dications (M2+) and dianions (M2-) from dihydro-dicyclopenta[ef,kl]heptalene (dihydro-azupyrene), dihydro-dicyclohepta[ed,gh]pentalene, and related bridged [14]annulenes

The annulenium ions of protonation, the two-electron oxidation dications, and the two-electron reduction dianions derived from dihydro- and dimethyldihydro derivatives (cis and trans) of dicyclopenta[ef,kl]heptalene (azupyrene) (1) and dicyclohepta[ed,gh]pentalene (2), which are the nonalternant isomers of pyrene, were studied by density functional theory (DFT) at the B3LYP/6-31G(d), 6-31+G(d,p), or 6-31++G(d,p) levels. Charge delocalization modes in the energetically most favored annulenium ions, as well as in the singlet and triplet dications and dianions, were assessed based on gauge-including atomic orbital (GIAO) Deltadelta](13)C values and via changes in natural population analysis (NPA) charges. Relative aromaticity/antiaromaticity in the annulenes were gauged via nucleus-independent chemical shift (NICS) and DeltaNICS. Annulenium ions of monoprotonation, the dications, and dianions derived from bismethano- and propanediylidene [14]annulenes were also studied by DFT for comparison with the cis-dihydro isomers derived from . Computed GIAO NMR data and the optimized geometries were compared with the experimental data when available, and the optimized geometries were compared with the X-ray data if known. A basis-set dependency study of the computed GIAO chemical shifts was also undertaken. The present DFT work represents the first detailed comparative theoretical study of charged annulenes derived from the dihydro derivatives of and .     

Study of flow rate in pressurized gradient capillary electrochromatography using splitter and separation of peptides using an Amide stationary phase

A pressurized gradient capillary electrochromatograph using a splitter was constructed. The variation in flow rate during gradient elution was investigated and separations of peptides using an Amide stationary phase were demonstrated. The flow rate, which is one of the important factors to control chromatographic behavior, was increased during the gradient elution, and the mismatching of mobile phase between the column and the resistance tubing derived three variation patterns in the flow rate. The electrophoretic migration in electrochromatography could enhance in separation of peptides. The separated peak number of tryptic digest of bovine serum albumin was increased from 30 to 40 by the application of +5 kV.     

Extraction separation of strontium and yttrium radionuclides by hydrogen heptachlorodicarbollylcobaltate in the presence of benzo-15-crown-5

Extraction of strontium and yttrium by the nitrobenzene solution of H⁺-form of heptachloro-bis-1,2-dicarbollylcobaltate (H⁺B^–) in the presence of benzo-15-crown-5 (B15C5, L) has been investigated. The presence of B15C5 leads to a great synergistic effect for the extraction of strontium and an antagonistic effect for the extraction of yttrium. The extraction constants of Sr²⁺ complexes of B15C5 were determined. The separation factor a(Sr/Y) in the system with B15C5 presents the same order of magnitude as that for 15C5.     

Generation of functionalized asymmetric benzynes with TMP-zincates. Effects of ligands on selectivity and reactivity of zincates

We have developed new methods for preparing functionalized benzynes through deprotonative zincation as a key reaction using R2Zn(TMP)Li, and we also describes dramatic ligand effects on the benzyne formation. Deprotonative zincation of various meta-substituted bromobenzenes with Me2Zn(TMP)Li proved effective for the one-pot generation of various 3-functionalized benzynes, particularly those electrophilic substituents such as ester, amide, and cyano. On the other hand, zincation with tBu2Zn(TMP)Li, followed by electrophilic trapping (with I2) proved a powerful tool for the preparation of 1,2,3-trisubstituted aromatic compounds.8 The resultant 1,2,3-trisubstituted benzenes are available as precursors for generation of 3-substituted benzynes by halogen-zinc exchange reactions with Me3ZnLi. These methods offer far greater generality than previous methods for the synthesis of functionalized asymmetric benzynes, and should be of value in new syntheses of various natural products and functional materials. In addition, these results underline the utility of spectator ligands on the central metal of ate complexes as a tunable functionality in the development of new ate complex-promoted reactions.     

Molecular mobility of lyophilized poly(vinylpyrrolidone) and methylcellulose as determined by the laboratory and rotating frame spin-lattice relaxation times of 1H and 13C

Laboratory- and rotating- frame spin-lattice relaxation times (T(1) and T(1rho)) of (1)H and (13)C in lyophilized poly(vinylpyrrolidone) (PVP) and methylcellulose (MC) are determined to examine feasibility of using T(1) and T(1rho) as a measure of molecular motions on large time scales related to the storage stability of lyophilized formulations. The T(1rho) of proton and carbon was found to reflect the mobility of PVP and MC backbones, indicating that it is useful as a measure of large-time-scale molecular motions. In contrast to the T(1rho), the T(1) of proton measured in the same temperature range reflected the mobility of PVP and MC side chains. The T(1) of proton may be useful as a measure of local molecular motions on a smaller-time-scale, although the measurement is interfered by moisture under some conditions. The temperature dependence of T(1) and T(1rho) indicated that methylene in the MC molecule had much higher mobility than that in the dextran molecule, also indicated that methylene in the PVP side chain had a higher mobility than that in the MC side chain.     

trans-2,2'-Bi(1-phenyladamantylidene): the most twisted biadamantylidene

The Grignard coupling of 2,2-dibromo-1-phenyladamantane gave trans-2,2'-bi(1-phenyladamantylidene) (1-Ph). Single-crystal X-ray analysis indicated that 1-Ph has a 23.2 degrees twisted double bond, which is much more distorted than that of parent 2,2'-biadamantylidene (1-H) and that of the ethyl-substituted derivative (1-Et). A cyclic voltammogram showed a reversible electron oxidation wave at 0.87 V vs Fc/Fc(+), which is 0.19 V lower than 1-H, indicating a significant increase in the HOMO energy level due to the distortion. The reaction of 1-Ph with 0.9 equiv of bromine gave an intramolecular Friedel-Crafts alkylation product, while bromination of 1-H and 1-Me has been reported to give a bridged bromonium ion and a rearranged product, 2-(1-methyl-2-adamantylidene)-4-bromotricyclo[5,3,1,0(3.9)]undec-4-ene, respectively.