Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.     

Singlet Oxygen–mediated Hydroxyl Radical Production in the Presence of Phenols: Whether DMPO–·OH Formation Really Indicates Production of ·OH?¶

The reaction of singlet oxygen (1O2) generated by ultraviolet-A (UVA)-visible light (lambda > 330 nm) irradiation of air-saturated solutions of hematoporphyrin with phenolic compounds in the presence of a spin trap, 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), gave an electron spin resonance (ESR) spectrum characteristic of the DMPO-hydroxyl radical spin adduct (DMPO-*OH). In contrast, the ESR signal of 5,5-dimethyl-2-pyrrolidone-N-oxyl, an oxidative product of DMPO, was observed in the absence of phenolic compounds. The ESR signal of DMPO-*OH decreased in the presence of either a *OH scavenger or a quencher of *O2 and under anaerobic conditions, whereas it increased depending on the concentration of DMPO. These results indicate both 1O2- and DMPO-mediated formation of free *OH during the reaction. When DMPO was replaced with 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline-N-oxide (DEPMPO), no DEPMPO adduct of oxygen radical species was obtained. This suggests that 1O2, as an oxidizing agent, reacts little with DEPMPO, in which a strong electron-withdrawing phosphoryl group increases the oxidation potential of DEPMPO compared with DMPO. A linear correlation between the amounts of DMPO-*OH generated and the oxidation potentials of phenolic compounds was observed, suggesting that the electron-donating properties of phenolic compounds contribute to the appearance of *OH. These observations indicate that 1O2 reacts first with DMPO, and the resulting DMPO-1O2 intermediate is immediately decomposed/reduced to give *OH. Phenolic compounds would participate in this reaction as electron donors but would not contribute to the direct conversion of 1O2 to *OH. Furthermore, DEPMPO did not cause the spin-trapping agent-mediated generation of *OH like DMPO did.     

Photoelectrochemistry of p-type Cu2O semiconductor electrode in ionic liquid

We investigated the photoelectrochemical characteristics and photo-stability of Cu₂O layered on a copper plate using a hydrophobic ionic liquid. Our findings revealed that Cu₂O is stable under white light irradiation, provided water is removed from the electrolyte. Methyl viologen derivative, a well-established electron acceptor, was introduced to the ionic liquid electrolyte, allowing the photo-induced electron transfer reaction at the Cu₂O/electrolyte interface to be characterized. The methyl viologen derivative exhibited two distinct redox reactions at −0.56 V and −0.98 V vs. Ag/AgCl, clearly indicating that no dimer formation or co-proportionation reaction occurred. The excessive photocurrents being continuously generated resulted from a viable photo-induced electron transfer reaction from the Cu₂O to the acceptor. However, in contrast, the reduction of the Cu₂O by water in the aqueous solution causes this electron transfer to be inhibited. We further demonstrate that these findings are vital to understanding the role of the Cu₂O and its photoelectrochemical applications.     

Polymerization of tetrahydrofuran by AlEt3–H2O promoter system: Rate of propagation reaction

Kinetic studies were carried out on the polymerization of tetrahydrofuran with catalyst systems of aluminum alkyl–epichlorohydrin. As aluminium alkyl species AlEt₃, AlEt₃–H₂O (1:0.1 to 1:1.0), and “oxyaluminum ethyl” were employed. The polymerizations with these catalysts are characterized by a mechanism of stepwise addition without chain transfer or termination, which is expressed by the kinetic relation R_p = K_p[P*] ([M]–[M]_e), where [M] and [M]_e are the instantaneous and equilibrium concentrations of monomer and [P*] is the concentration of propagating species calculated from the amount and molecular weight of the product polymer. The determination of the rate constant k_p for these catalysts has shown that the polymerization rate varied considerably with the change of aluminum alkyl species, i.e., with the water-to-aluminum ratio, but the propagation rate constant itself varied very little. The variation of polymerization rate was, therefore, attributed primarily to the differences in concentration of the propagating species, i.e. the efficiency of the catalyst in forming propagating species. The catalyst efficiency was closely related to the acid strength of the aluminum alkyl species, which was estimated from the magnitude of shift of the xanthone carbonyl band in the infrared spectrum of its coordination complex with aluminum alkyl. The maximal catalyst efficiency was attained at about [H₂O]/[AlEt₃] = 0.75.     

Oxime-based salen-type tetradentate ligands with high stability against imine metathesis reaction

Although salen and its analogues are versatile chelate ligands in inorganic and organometallic chemistry, synthesis of unsymmetrical salen derivatives consisting of two different salicylideneimine moieties is difficult because of the C=N bond recombination. To develop stable analogues of salen-type ligands, we synthesized a series of new ligands salamo (=1,2-bis(salicylideneaminooxy)ethane) on the basis of O-alkyl oxime instead of the imine moiety. Eight salamo ligands 1a-h were prepared in 64-88% yields as colorless crystals from the corresponding salicylaldehydes 2a-h. The crystal structure of 1a-c suggests that the oxime-OH form is more predominant than the keto-NH form. The reaction of 2a-e with excess 1,2-bis(aminooxy)ethane gave monooximes 3a-e in 59-86%, which further reacted with a different salicylaldehyde to afford unsymmetrical salamo ligands 4-8 as stable crystals in 51-70%. No reaction took place when a mixture of salamo derivatives 1a and 1b was treated at 40 degrees C in H2O/MeCN (5:95). However, the metathesis reaction of salen derivatives 9a and 9b completed in 2 h to give a statistical mixture. Monooxime 3b was much more stable than monoimine 11 which is difficult to be isolated. These results indicate the extremely high stability of the salamo derivatives 1 and precursors 3.     

Polyesters containing ring units in main chains. I. Preparation and stereochemistry of monomers and polyesters

Cycloalkanone (C₅–C₈, C₁₂, and C₁₅) or cycloalkane (C₅ and C₆) ring-containing monomeric diesters and the polyesters derived from them were prepared, and their configurations were studied by ¹³C-NMR spectroscopy. Absolute configurations were determined for ring sizes 5, 6, and 7. Configurational change during reduction of a ketonic group of monomeric diesters with ring sizes 5 and 6 was discussed in terms of the steric effect of ring substituents on the ketonic group. In the polycondensation reaction epimerization of the ring units was observed in 5-, 6-, and 7-membered cycloalkanones and not in others, which is explained by steric hindrance by the ring substituents against attack of tetrabutyl titanate catalyst on the ketonic group.     

Multipoint recognition of catecholamines by hydrindacene-based receptors accompanied by the complexation-induced conformational switching

The molecular recognition of catecholamines by hydrindacene-based receptors 1 and 2, as well as the durene-based receptor 3, and the guest-induced conformational changes are reported. These receptors selectively bind adrenaline and dopamine salts through the guests' ammonium group and 3-hydroxyl group on the aromatic ring. In the case of adrenaline, an additional hydrogen bond with a benzylic hydroxyl group is formed. In 2 % CD3CN/CDCl3, the association constants are of the order of 10(4) M(-1), which is much larger than with guests without the 3-hydroxyl groups (10(3) M(-1)). The two amide groups of receptor 1 can rotate freely around the C(aromatic)--C(amide) bond, whereas the tert-amide in 2 changes between two stable conformations at a slow enough rate to allow detection by (1)H NMR spectroscopy. In the absence of a guest molecule, the syn-conformer is less stable than the anti-conformer. On complex formation with adrenaline, the syn-conformer becomes dominant due to an intramolecular dipole-reversal effect in addition to multipoint hydrogen bonding.