Electrochemical preparation of graphite intercalation compounds containing a cyclic amide, [CF2(CF2SO2)2N]

Graphite intercalation compounds (GICs) containing the cyclo-hexafluoropropane-1,3-bis(sulfonyl)amide anion, [CF₂(CF₂SO₂)₂N]⁻, are prepared for the first time. Stages 2 and 3 GICs are obtained by electrochemical oxidation of graphite in a nitromethane electrolyte. Gallery heights of 0.85-0.86 nm are determined by powder X-ray diffraction, and the intercalate anion orientation within the intercalate galleries is modeled using an energy minimized anion structure. GIC compositions are determined by thermogravimetric, fluorine and nitrogen analyses. The chemical preparation and bifluoride displacement reactions are compared with a GIC containing the linear bis(trifluoromethanesulfonyl)amide anion, [(CF₃SO₂)₂N]⁻.     

Design, testing and two-dimensional flow modeling of a multiple-disk fan

A multiple-disk Tesla type fan has been designed, tested and analyzed two-dimensionally using the conservation of angular momentum principle. Experimental results showed that such multiple-disk fans exhibited exceptionally low performance characteristics, which could be attributed to the low viscosity, tangential nature of the flow, and large mechanical energy losses at both suction and discharge sections that are comparable to the total input power. By means of theoretical analysis, local and overall shearing stresses on the disk surfaces have been determined based on tangential and radial velocity distributions of the air flow of different volume flow rates at prescribed disk spaces and rotational speeds. Then the total power transmitted by rotating disks to air flow, and the power acquired by the air flow in the gap due to transfer of angular momentum have been obtained by numerically integrating shearing stresses over the disk surfaces. Using the measured shaft and hydraulic powers, these quantities were utilized to evaluate mechanical energy losses associated with the suction and discharge sections of the fan.     

Treatment in Swelling Solutions Modifying Cellulose Fiber Reactivity – Part 1: Accessibility and Sorption

Of prime importance in reactions involving insoluble cellulosic fibers is the sorption of reagents, which is governed by their degrees of accessibility in substrates. Swelling treatments of cellulosics in alkali solutions alter substrate accessibility leading to changes in their reactivity. In this paper, the first of a two-part series, we collate and examine the results from various studies involving different techniques to characterize modifications in cellulosic fibers after swelling treatments in alkali solutions. Results from measurements of structure and accessibility in fibers with techniques such as water retention, inverse size exclusion chromatography (ISEC), iodine sorption, fiber diameters, and fiber-splitting propensities indicate that the influence of swelling treatments on fiber structure/accessibility is differs with alkali type. The results show that a non-uniform rather than uniform distribution of reagents within structures is a more accurate representation of reactions involving swollen cellulosic fibers. Hence, the observed changes in cellulose-fiber reactivity are governed by the degrees of fiber swelling, and reagent sorption and accessibility during swelling treatments.     

Novel Complexes of Zinc(II) with Different Proton Transfer Ion Pairs Obtained from Dipicolinic Acid: Synthesis, Characterization and X-ray Crystal Structure

Abstract  Three new complexes of zinc(II) with three different proton transfer compounds, obtained from pyridine-2,6-dicarboxylic acid (dipicolinic acid) and different Lewis bases, were synthesized and characterized using IR, ¹H NMR and ¹³C NMR spectroscopy and single crystal X-ray diffraction. The chemical formulae and space groups of the complexes are (pipzH₂)[Zn(pydc)₂] · 4H₂O, P2₁/n (1), (EDGnH₂)[Zn(pydc)₂] · 3H₂O, P2₁/c (2) and (pdaH₂)[Zn(pydc)₂] · 4H₂O, (3) where pydc, pipz, EDGn and pda are standing for dipicolinic acid, piperazine, ethylenediguanidine and 1,3-propanediamine respectively. Cell parameters of the complexes are a = 7.9493(4) ?, b = 13.4386(7) ?, c = 21.0557(11) ?, β = 90.415(5)° for 1; a = 9.785(3) ?, b = 25.671(4) ?, c = 9.3402(16) ?, β = 90.790(17)° for 2 and a = 8.411(5) ?, b = 11.650(7) ?, c = 12.793(8) ?, α = 115.534(9)°, β = 92.791(10)°, γ = 97.778(10)° for 3. The three crystal structures illustrate that the metal ion is six-coordinated by two pydc’s. In all three compounds a large number of O–H⋯O, N–H⋯O and C–H⋯O hydrogen bonds are observed. These interactions as well as other noncovalent interactions such as ion–pairing and π–π stacking play an important role in the formation and stabilization of supramolecular systems in the crystal lattices. Index Abstract  The main purpose of this paper is to report and discuss about the synthesis, characterization, crystal structure and non-covalent interactions of three supramolecular frameworks of six-coordinated Zn(II) complexes, obtained by the reaction of different proton transfer compounds, i.e. (pipzH₂)(pydc), (EDGnH₂) (pydc) · 3H₂O and (pdaH₂)(pydc) · (pydcH₂) · 2.5H₂O with corresponding metallic salts.      

A Sodium Supported Borate Ester: Synthesis,Spectral Characterization and Crystal Structure of dimeric Sodium Organoborate Complex [Na(py)][B(hyncaH<Subscript>−2</Subscript>)<Subscript>2</Subscript>]<Subscript>2</Subscript>

Abstract  A dimeric sodium supported borate complex, [Na(py)][B(hyncaH₋₂)₂]₂ (1) (py = pyridine, hynca = 1-hydroxynaphthalene-2-carboxylic acid), has been synthesised by the reaction of NaBH₄ with two equivalents of hynca in anhydrous THF and following crystallization from py/H₂O solution afforded borate ester derivative. The complex has been fully characterized by FT-IR in the solid state and by NMR (¹H and ¹³C) spectroscopy and electrospray ionization mass spectrometry in solution. The molecular structure of the title compound was determined by single crystal X-ray diffraction. Structure analysis of complex 1 confirmed the presence of an anionic complex [B(hyncaH₋₂)₂]⁻ in which boron atom is coordinated simultaneously by two hynca ligands utilising both alkoxide and carboxylate groups for bonding. The Na atom is six- coordinate to five O atoms of hydroxy carboxylic acid and one pyridine N atom. Crystal data: crystal system, monoclinic, a = 10.971(3) Å, b = 6.839(3) Å, c = 30.545(5) Å, β = 92.20(2)°, space group P2₁/c (#14), V = 2,290(1) Å³, Z = 4. Index Abstract  There are limited examples of alkali metal supported borate ester complexes.      

On Finite Model Property for Admissible Rules

Our investigation is concerned with the finite model property (fmp) with respect to admissible rules. We establish general sufficient conditions for absence of fmp w. r. t. admissibility which are applicable to modal logics containing K4: Theorem 3.1 says that no logic λ containing K4 with the co-cover property and of width > 2 has fmp w. r. t. admissibility. Surprisingly many, if not to say all, important modal logics of width > 2 are within the scope of this theorem–K4 itself, S4, GL, K4.1, K4.2, S4.1, S4.2, GL.2, etc. Thus the situation is completely opposite to the case of the ordinary fmp–the absolute majority of important logics have fmp, but not with respect to admissibility. As regards logics of width ≤ 2, there exists a zone for fmp w. r. t. admissibility. It is shown (Theorem 4.3) that all modal logics A of width ≤ 2 extending S4 which are not sub-logics of three special tabular logics (which is equipotent to all these λ extend a certain subframe logic defined over S4 by omission of four special frames) have fmp w.r.t. admissibility.     

Optimization of a Multiresidue Analysis of 65 Pesticides in Surface Water Using Solid-Phase Extraction by LC-MS/MS

An analytical method was developed and validated for simultaneous quantitation of 65 pesticides, including one single solid-phase extraction (SPE) procedure in surface water by liquid chromatography coupled to tandem mass spectroscopy. Different parameters that have an influence on extraction efficiency were evaluated in this research. Different types of cartridges, elution solvents, and sorbent drying time were investigated, and the most appropriate one was selected. Moreover, various pretreatment techniques were applied to remove sediments from water without the loss of pesticides. Centrifugation was introduced as the best option at the beginning of sample preparation to resolve the clogging of the sorbent cartridges. The recoveries of all pesticides ranged from 70% to 120%, with a relative standard deviation of less than 13.7%. The feasibility of the method was evaluated on 10 surface water samples with different concentrations of sand, sediment, and particles.     

Analysis of Non-Exponential Multi-Component Emission of Aryl Ketones: The Cases for the Phosphorescence Spectra of Beta-Naphthil and Benzophenone

The dual emission spectra of β-naphthil in two different glasses at 77° K have been resolved to their individual components by a computerized kinetic phosphorescence spectrometry system. Both the time-resolved spectrum which reveals the kinetic behavior of the excited states and the wavelength-resolved spectrum which tells the nature of the emitting species are obtained. Several possible emission mechanisms are discussed based on the informations gathered through the resolution processes. Triplet-triplet annihilation is shown to exist in solutions of benzophenone as well as in solutions of β-naphthil. As concluded from the results of time-resolved study, such kind of interaction is responsible for the non-exponential distorsion of the decays. And according to the wavelength-resolved studies, transoid and cisoid conformational isomers seem to accout for the sources of the dual emission of β-naphthil.     

Studies on intramolecular Diels-Alder reactions of furo[3,4-c]pyridines in the synthesis of conformationally restricted analogues of nicotine and anabasine

En route to conformationally restricted analogues of nicotine and anabasine, a novel synthetic route to bridged anabasines is described that hinges on a domino intramolecular [4 + 2]-cycloaddition/ring opening-elimination sequence of 3-amino-substituted furo[3,4-c]pyridines. Extension of this route to bridged nicotines, however, proved abortive, even when the dienophile tether is activated by a p-tolylsulfonyl group or when the diene moiety is activated by an electron-releasing methoxy substituent. A detailed density functional theoretical study (B3LYP/6-31+G) was undertaken to provide insight into the factors that facilitate an intramolecular Diels-Alder reaction in the former case.     

DNA adsorption onto polyethylenimine-attached poly(p-chloromethylstyrene) beads

In this study, DNA adsorption properties of polyethylenimine (PEI)-attached poly(p-chloromethylstyrene) (PCMS) beads were investigated. Spherical beads with an average size of 186 microm were obtained by the suspension polymerization of p-chloromethylstyrene conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, PCMS beads had a specific surface area of 14.1 m2/g. PEI chains could be covalently attached onto the PCMS beads with equilibrium binding capacities up to 208 mg PEI/g beads, via a direct chemical reaction between the amine and chloromethyl groups. After PEI adsorption with 10% (w/w) initial PEI concentration, free amino content of PEI-attached PCMS beads was determined as 0.91 mequiv./g. PEI-attached PCMS beads were utilized as sorbents in DNA adsorption experiments conducted at +4 degrees C in a phosphate buffer medium of pH 7.4. DNA immobilization capacities up to 290 mg DNA/g beads could be achieved with the tried sorbents. This value was approximately 50-times higher relative to the adsorption capacities of previously examined sorbents.