Gliclazide as novel carrier in construction of PVC-based La(III)-selective membrane sensor

A PVC-based sensor for La³⁺ ions based on N-[hexahydrocyclopentapyrol-2((1H)yl)amino]carbonyl]-4-methyl benzene sulfonamide (gliclazide) as a novel carrier was prepared. The electrode exhibits a Nernstian response for La³⁺ over a wide concentration range (1.0×10⁻¹-1.0×10⁻⁶ M) with a slope of 20.1 mV per decade. The limit of detection is 8.0×10⁻⁷ M. The sensor has a very short response time (<15 s) and a useful working pH range of 4.0-8.0. The proposed membrane sensor shows excellent discriminating ability towards La³⁺ ions with regard to several alkali, alkaline earth, transition and heavy metal ions. The electrode was successfully applied for determination of La³⁺ in binary mixtures.     

A selective membrane electrode for iodide ion based on a thiopyrilium ion derivative as a new ionophore

A highly selective electrode for iodide ion based on a thiopyrilium derivative as an excellent ionophore is described. At pH 5.5-8.0, the electrode responds to iodide ion in a linear range from 1.0×10⁻¹ to 8.0×10⁻⁷ M with a slope of 60.2 mV per decade, and a detection limit of 2.0×10⁻⁷ M. Selectivity coefficients determined with the match potential method (MPM) indicate that the interference from inorganic and organic anions is very small. The proposed sensor shows a fast response time of approximately 15 s. It was applied as an indicator electrode in titration of iodide with Ag⁺.     

Determination of ultra trace amounts of cobalt and nickel in water samples by inductively coupled plasma-optical emission spectrometry after preconcentration on modified C18-silica extraction disks

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of cobalt and nickel ions in water samples is proposed. The preconcentration is achieved using C₁₈-silica extraction disks modified with 5-(6-methoxy-2-benzothiazoleazo)-8-aminoquinoline (MBTAQ). The retained ions on the prepared solid phase was eluted with 10 ml of 0.01 M nitric acid and measured by inductively coupled plasma-optical emission spectrometry (ICP-OES). The influence of the type and amount of eluent used, pH, sample and eluent flow rates, amount of MBTAQ and the effect of other ions on extraction efficiency were investigated. The limits of detection of the method were 0.08 and 0.06 μg l^− 1 for cobalt and nickel, respectively, and provide an enrichment factor of 100. The results obtained on 10 successive extractions and elution cycles revealed relative standard deviations of 1.5 and 1.0% for cobalt and nickel, respectively. The proposed method has been applied to the determination of ultra trace amounts of cobalt and nickel ions in natural and synthetic water samples with satisfactory results.     

Removal of Arsenic (III) from natural contaminated water using magnetic nanocomposite: kinetics and isotherm studies

The application of newly synthesized Fe₃O₄/TiO₂–SiO₂ that is modified with zinc (FTSZ) as a sorbent, for the removal of arsenic from contaminated water has been investigated in the present study. SEM, FTIR, XRD, BET, Zeta potential sizer (ξ) analyses are used to determine the sorbent characterization. The effect of the operational parameters such as initial pH, initial concentration, and the contact time were studied. In addition, the equilibrium behavior of FTSZ in As(III) removal was investigated in the temperature range of 20–40 °C. The results showed that the equilibrium data were fitted well with Langmuir than Freundlich isotherm model. The maximum monolayer adsorption capacity estimated by Langmuir isotherm was 24.010 mg g^?1. Thermodynamic parameters, ?H°, ?S° and ?G° were also calculated from graphical interpretation of the experimental data. Standard heats of sorption (?H°) were found to be endothermic and ?S° values were calculated to be positive for the sorption of As(III) onto the adsorbent.     

Speciation analysis of mercury contaminants in water samples by RP-HPLC after solid phase extraction on modified C18 extraction disks with 1,3-bis(2-cyanobenzene)triazene

A highly sensitive and accurate method for preconcentration and determination of ultra trace amounts of inorganic mercury and organomercury compounds in different water samples is proposed. The preconcentration is achieved using octadecyl silica (C₁₈) extraction disks modified with 1,3-bis(2-cyanobenzene)triazene (CBT). The retained analytes as their triazenide complexes on the solid phase was eluted with 10 ml acetonitrile and measured by reversed-phase high-performance liquid chromatography (RP-HPLC). Type and amount of eluent, pH, amount of CBT, flow rates of sample solution and eluent have been optimized in order to obtain quantitative recovery of the analytes. The effect of interfering ions, such as Cu²⁺, Mn²⁺, Fe²⁺, Al³⁺, Zn²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, K⁺ and Na⁺ usually present in water samples on the recovery of the analytes has also been investigated. The enrichment factor of 100 was obtained for all mercury species and the analytical detection limits of phenylmercury, methylmercury and Hg²⁺ were found as 0.8, 1.0 and 1.3 ng l^− 1, respectively. Stability of mercury species after extraction on the modified disks was studied and the results showed that complexes collected on the disks were stable for at least 5 days. The proposed method has been applied to the quantitative determination of mercury species in natural and synthetic water samples with recoveries more than 90%.     

Nuclephilic ring opening of epoxides promoted by multi-site phase-transfer catalyst:An efficient and eco-friendly route to synthesis of b-hydroxy-thiocyanate

A highly effective and mild protocol for ring opening of epoxides with NH ₄ SCN in the presence of catalytic amount of a multisite phase-transfer catalyst, α,α',α" -N-hexakis(triethylammoniummethylene chloride)-melamine, is developed. A variety of b-hydroxy thiocyanates as important intermediates in agricultural and pharmaceutical chemistry were obtained in high yields with excellent regioselectivity and in short reaction times.     

Synthesis,structural characterization and antibacterial activity of diorganotin(Ⅳ) complexes with ONO tridentate Schiff bases containing pyridine ring

Five organotin（IV） complexes,were obtained by reaction of SnR₂Cl₂（R = Ph,Me,Bu） with ONO donor Schiff bases.The synthesized complexes have been investigated by elemental analysis and IR,¹H NMR,and ¹¹⁹Sn NMR spectroscopy.These data show that the Schiff base acts as a tridentate dianionic ligand and coordinates via the imine nitrogen and two oxygen atoms.The Xray crystallography of complex 4 shows a dimeric structure for this molecule.The in vitro antibacterial activities of the Schiff bases and their complexes have been evaluated against Gram-positive（Bacillus subtilis and Staphylococcus aureus） and Gram-negative （Escherichia coli and Pseudomonas aeruginosa） bacteria and compared with the standard antibacterial drugs.     

Methyl jasmonate influence on silymarin production and plant stress responses in Silybum marianum hairy root cultures in a bioreactor

In this article our aim was to evaluate mass cultivation of S. marianum hairy roots in a bioreactor to produce silymarin. The effects of methyl jasmonate (MJ) elicitation on the accumulation of silymarin and the extent of the MJ-induced oxidative damage were investigated in bioreactor hairy root cultures of S. marianum. The growth rate of the bioreactor hairy root cultures was higher than that of those in a shake flask after 3 weeks. Silymarin accumulation was increased from 0.13?mg?g?1 DW in non-treated hairy roots to 0.22?mg?g?1 DW in hairy roots 72?h after 100?μM?MJ treatment. Guaiacol peroxidase and ascorbate peroxidase were activated by MJ?72?h after treatment, being 3.2- and 1.3-fold higher, respectively, than that of the control. An increase in enzymatic activity suggests increased scavenging of reactive oxygen species, indicating the tolerance to MJ stress. These results suggest that MJ elicitation is beneficial for silymarin production using bioreactor hairy root cultures.     

Semi-empirical study of ortho-cresol photo degradation in manganese-doped zinc oxide nanoparticles suspensions

ABSTRACT: The optimization processes of photo degradation are complicated and expensive when it is performed with traditional methods such as one variable at a time. In this research, the condition of ortho-cresol (o-cresol) photo degradation was optimized by using a semi empirical method. First of all, the experiments were designed with four effective factors including irradiation time, pH, photo catalyst's amount, o-cresol concentration and photo degradation % as response by response surface methodology (RSM). The RSM used central composite design (CCD) method consists of 30 runs to obtain the actual responses. The actual responses were fitted with the second order algebraic polynomial equation to select a model (suggested model). The suggested model was validated by a few numbers of excellent statistical evidences in analysis of variance (ANOVA). The used evidences include high Fvalue (143.12), very low P-value (<0.0001), non-significant lack of fit, the determination coefficient (R2 = 0.99) and the adequate precision (47.067). To visualize the optimum, the validated model simulated the condition of variables and response (photo degradation %) by a few number of three dimensional plots (3D). To confirm the model, the optimums were performed in laboratory. The results of performed experiments were quite close to the predicted values. In conclusion, the study indicated that the model is successful to simulate the optimum condition of o-cresol photo degradation under visible-light irradiation by manganese doped ZnO nanoparticles.     

<Emphasis Type="Italic">N</Emphasis>-Bromo Reagent Mediated Oxidation of Urazoles to Their Corresponding Triazolinediones under Mild and Heterogeneous Conditions

Summary. Various N-bromo reagents [HMTAB, DABCO-bromine, DPTBE, and TBCA] were used as effective oxidizing agents for the oxidation of urazoles and bisurazoles to their corresponding triazolinediones under mild and heterogeneous conditions at room temperature with good to excellent yields. Also the oxidation of some new 4-phenylurazole derivatives with these reagents is discussed.