A remarkable stereoselectivity switching upon solid-state versus solution-phase enantiodifferentiating photocyclodimerization of 2-anthracenecarboxylic acid mediated by native and 3,6-anhydro-γ-cyclodextrins

The enantiodifferentiating [4+4] photocyclodimerization of anthracenecarboxylic acid (AC) mediated by native, mono- and di-3,6-anhydro-γ-cyclodextrins was investigated in both aqueous solution and solid-state. The solid-state photolyses gave inherently disfavored head-to-head photodimers in much higher chemical and optical yields than in the aqueous solution.     

Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Importance of the isopropylidene terminal of geranylgeranyl group for the formation of tetraether lipid in methanogenic archaea

Labeling experiments using several deuterated lipids were pursued to study the biosynthesis of macrocyclic isoprenoidal lipids of thermophilic methanogenic archaea, Methanothermobacter thermautotrophicus. The isopropylidene terminal of geranylgeranyl group of monomeric precursor appeared to be important for the CC bond formation at the hydrophobic end in the macrocyclic lipids. A mechanism involving a radical trigger at the allylic methyl group is proposed for this CC bond formation.     

Adsorption characteristics of bisphenol A onto carbonaceous materials produced from wood chips as organic waste

A single-chain amphiphile containing a rigid Schiff base segment, 3-cyano-N-benzylidene hexadecylamine (CNBHB) in the polar head group was synthesized and studied for its vesicle-forming properties. The dependence of the aggregation behavior of the vesicles as such and in the presence of manganese ions were studied as a function of temperature using differential scanning calorimetry and turbidity measurements. Transmission electron microscopy (TEM) was used to analyze the morphology of the vesicles, showed interesting features with fusion of regular structures, and were quite stable. In the presence of manganese ions, fusion of vesicles takes place. This could be due to the metal ions that are bound to the surface of the vesicles that cause a partial destruction of the hydration shell on the surface of the vesicles. The reduction in the hydration force could thus be responsible for the fusion.     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Syntheses and thermal reactions of 2-alkyl(or aryl)-1-benzoyl-3,4-dihydro-2-thianaphthalenes

1-Benzoyl-2-methy1-3,4-dihydro-2-thianaphthalene ($\text{4a}$) underwent novel intermolecular 1,4-rearrangement in refluxing toluene to give an enol ether $\text{5a}$, while rearrangement of 2-phenyl derivative $\text{4e}$ proceeded intramolecularly in refluxing xylene to afford a 1,4-rearranged enol ether $\text{5b}$. On the other hand, ylides $\text{4a–e}$ were refluxed in alcohols to afford some ring-opened products $\text{10–12}$.     

Nuclear magnetic resonance study of exchanging systems : The line shape analysis of the inversion of 9,10-dihydro-4,5-dimethylphenanthrene by the density matrix method

9,10-Dihydro-4,5-dimethylphenanthrene has two rotational isomers around the pivot bond. This compound shows a complex signal pattern of an AA′BB′ type for the four methylene protons in the NMR spectrum. The inversion process is analysed using the density matrix method, and at various temperatures the calculated line shapes are fitted to the observed spectra to obtain the life-time τ of the inversion. From the logarithmic plot of the life time versus 1/T, the kinetic parameters of this intramolecular inversion process are obtained as follows: E_a = 25·3 ± 1·0 Kcal/mole ΔG3 = 24°1 ± 1·0 Kcal/mole at 25·0° ΔH3 = 24·7 ± 1·0 Kcal/mole ΔS3 = 2·1 ± 0·8 e.u.     

The synthesis of 6-C-substituted 9-methoxymethylpurine derivatives

6-Cyanomethylene ( 2 ), which was prepared via 1 by substitution with malononitrile, has been catalytically hydrogenated to the α-(aminomethylene)-9-(methoxymethyl)-9H-purine-6-acetonitrile ( 3 ) in good yield using N,N-dimethylformamide-benzene as solvent over Pd-C under medium pressure. Intermediate 3 was derived to aldehyde 5 by hydrolysis with acid or base. Substitution of 3 with amines gave the corresponding alkylamines 6 and 7 . Reaction of 3 with hydrazine and acetamidine hydrochloride gave pyrazole derivative 8 and pyrimidine derivative 9 , respectively.     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.     

Optical resolution by preferential crystallization of (1RS,3RS)-1,2,3,4-tetrahydro-6,7-dihydroxy-1-methyl-3-isoquinolinecarboxylic acid

The racemic structure of (1RS,3RS)-1,2,3,4-tetrahydro-6,7-dihydroxy-1-methyl-3-isoquinolinecarboxylic acid [(1RS,3RS)-1] was examined based on the melting point, solubility, and IR spectrum, with the aim of optical resolution by preferential crystallization. (1RS,3RS)-1 was indicated from these results to exist as a conglomerate. The successive optical resolution by preferential crystallization of (1RS,3RS)-1 yielded (1S,3S)- and (1R,3R)-1 with optical purities of 85--95% at 66--81% degrees of resolution, which were fully purified by recrystallization.