Ruthenium(II)-catalyzed hydrogenation of carbon dioxide to formic acid. Theoretical study of real catalyst, ligand effects, and solvation effects

Ruthenium-catalyzed hydrogenation of carbon dioxide to formic acid was theoretically investigated with DFT and MP4(SDQ) methods, where a real catalyst, cis-Ru(H)2(PMe3)3, was employed in calculations and compared with a model catalyst, cis-Ru(H)2(PH3)3. Significant differences between the real and model systems are observed in CO2 insertion into the Ru(II)-H bond, isomerization of a ruthenium(II) eta1-formate intermediate, and metathesis of the eta1-formate intermediate with a dihydrogen molecule. All these reactions more easily occur in the real system than in the model system. The differences are interpreted in terms that PMe3 is more donating than PH3 and the trans-influence of PMe3 is stronger than that of PH3. The rate-determining step is the CO2 insertion into the Ru(II)-H bond. Its deltaG(o++) value is 16.8 (6.8) kcal/mol, where the value without parentheses is calculated with the MP4(SDQ) method and that in parentheses is calculated with the DFT method. Because this insertion is considerably endothermic, the coordination of the dihydrogen molecule with the ruthenium(II)-eta1-formate intermediate must necessarily occur to suppress the deinsertion. This means that the reaction rate increases with increase in the pressure of dihydrogen molecule, which is consistent with the experimental results. Solvent effects were investigated with the DPCM method. The activation barrier and reaction energy of the CO2 insertion reaction moderately decrease in the order gas phase > n-heptane > THF, while the activation barrier of the metathesis considerably increases in the order gas phase < n-heptane < THF. Thus, a polar solvent should be used because the insertion reaction is the rate-determining step.     

Importance of the isopropylidene terminal of geranylgeranyl group for the formation of tetraether lipid in methanogenic archaea

Labeling experiments using several deuterated lipids were pursued to study the biosynthesis of macrocyclic isoprenoidal lipids of thermophilic methanogenic archaea, Methanothermobacter thermautotrophicus. The isopropylidene terminal of geranylgeranyl group of monomeric precursor appeared to be important for the CC bond formation at the hydrophobic end in the macrocyclic lipids. A mechanism involving a radical trigger at the allylic methyl group is proposed for this CC bond formation.     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Syntheses and thermal reactions of 2-alkyl(or aryl)-1-benzoyl-3,4-dihydro-2-thianaphthalenes

1-Benzoyl-2-methy1-3,4-dihydro-2-thianaphthalene ($\text{4a}$) underwent novel intermolecular 1,4-rearrangement in refluxing toluene to give an enol ether $\text{5a}$, while rearrangement of 2-phenyl derivative $\text{4e}$ proceeded intramolecularly in refluxing xylene to afford a 1,4-rearranged enol ether $\text{5b}$. On the other hand, ylides $\text{4a–e}$ were refluxed in alcohols to afford some ring-opened products $\text{10–12}$.     

The synthesis of 6-C-substituted 9-methoxymethylpurine derivatives

6-Cyanomethylene ( 2 ), which was prepared via 1 by substitution with malononitrile, has been catalytically hydrogenated to the α-(aminomethylene)-9-(methoxymethyl)-9H-purine-6-acetonitrile ( 3 ) in good yield using N,N-dimethylformamide-benzene as solvent over Pd-C under medium pressure. Intermediate 3 was derived to aldehyde 5 by hydrolysis with acid or base. Substitution of 3 with amines gave the corresponding alkylamines 6 and 7 . Reaction of 3 with hydrazine and acetamidine hydrochloride gave pyrazole derivative 8 and pyrimidine derivative 9 , respectively.     

Synthesis and γ-radiolysis of 2′-deoxy-5-fluorouridine and 5-fluorouridine derivatives

Seventeen compounds having a variety of substituents at the 3- and 5′-positions of 2′-deoxy-5-fluorouridine (5-FUdR) and 5-fluorouridine (5-FUR) were synthesized, and their γ-radiolysis in aqueous solutions were studied. The compounds having thioureido (RNHCSNH, R ? H, PhCH₂, acyl) and thiocarbonylamino (XCSNH, X ? PhCH₂S, PhO) groups at the 3-position of 5-FUdR were efficiently cleaved to give 5-FUdR with high G values upon γ-irradiation of their aqueous solutions. The active species for these cleavage reactions were hydrated electron (e^? _aq), H^? and HO^?. However, the compounds having a dimethylsulfoxyimino group at 3-position of 5-FUdR and 5-FUR afforded 5-FUdR and 5-FUR only under the radiolysis conditions where e^? _aq becomes a principal active species. The compound having a 2-benzoylthiazoylthiocarbonylamino group at the 3-position of 5-FUdR showed the highest reactivity toward HO^.. The mechanisms of these γ-radiolysis reactions are discussed. The examination of anticellular activities of γ-irradiated compounds having a thiocarbonylamino group at the 3-position of 5-FUdR toward murine Sarcoma 180 cells revealed that these compounds may be utilized as a candidate for a radiation-induced drug (RID).     

The study of electron beam flue gas treatment for coal-fired thermal plant in Japan

The fundamental research work with simulated coal-fired flue gas was performed in JAERI to get basic data for electron beam treatment of flue gas from thermal power plants in Japan. The standard condition of the experiments was set to be the same as that of next large scale pilot test in Nagoya. The concentrations of NO_x and SO_x were 225 ppm and 800 ppm, respectively. The temperature of the system was 65°C. The effect of multiple irradiation was observed for NO_x removal. The target SO_x and NO_x removals (94% and 80%, respectively) with low NH₃ leakage (less than 10 ppm) were achieved at 9 kGy irradiation with 0.9 NH₃ stoichiometry during 7 hours continuous operation. The facility for the pilot plant (12,000 Nm³/hr) has just built at the site of Shin-Nagoya power plant of Chubu Electric Power Company and will be started in full operation in November 1992.     

Crystallization of filled nylon 6 III. Non-isothermal crystallization

Summary DSC data on crystallization kinetics from the melt at different cooling rates of nylon 6 containing various amonts of untreated and surface-treated fillers, were analyzed in terms of a modified Kolmogorov-Avrami equation. It was established that mechanism of crystallinity development in molten nylon 6 does not change appreciably in presence of aminosilane-treated glass beads and small amounts of untreated glass beads, whereas time exponentn was found to decrease with increasing filler content in samples containing untreated glass beads and Aerosil. On the other hand, dependence of temperature of the onset of crystal nucleation on cooling rate obeyedm = 2 law for pure nylon 6 and samples containing surface-treated filler, whilem = 4 law seemed to hold for samples containing large amounts of untreated fillers at low cooling rates (m is the exponent at degree of supercooling). It was concluded that although isothermal conditions of crystallization should be preferred for further quantitative investigations of polymer-filler interactions in highly filled polymer melts, the above results qualitatively are consistent with trends discovered in isothermal crystallization experiments.     

Optical resolution by preferential crystallization of (1RS,3RS)-1,2,3,4-tetrahydro-6,7-dihydroxy-1-methyl-3-isoquinolinecarboxylic acid

The racemic structure of (1RS,3RS)-1,2,3,4-tetrahydro-6,7-dihydroxy-1-methyl-3-isoquinolinecarboxylic acid [(1RS,3RS)-1] was examined based on the melting point, solubility, and IR spectrum, with the aim of optical resolution by preferential crystallization. (1RS,3RS)-1 was indicated from these results to exist as a conglomerate. The successive optical resolution by preferential crystallization of (1RS,3RS)-1 yielded (1S,3S)- and (1R,3R)-1 with optical purities of 85--95% at 66--81% degrees of resolution, which were fully purified by recrystallization.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.