A Validated LC Method for the Quantitation of Cefotaxime in pH-Sensitive Nanoparticles

A sensitive and rapid routine LC method was validated for measuring cefotaxime incorporated in three different pH-sensitive nanoparticles. The drug was chromatographed on a C18 reversed-phase column; the mobile phase used was 0.05 M aqueous ammonium acetate, acetonitrile and tetrahydrofuran (87:11:2, v/v) adjusted to pH 5.5 with acetic acid. The flow rate was 1 mL min^?1 and cefotaxime was quantified at 254 nm, with a sensitivity range of 0.005 AUFS. The validated method was specific, linear (R ² ≥ 0.999), precise and accurate in a concentration range of 0.2–50.0 μg mL^?1. The method was rapid, selective and suitable for evaluation of cefotaxime in pH-sensitive Eudragit nanoparticles.     

Bis­(ethyl­enedi­amine)copper(II) bis(O,O′‐diethyl di­thio­phosphate)

In the structure of the title compound, [Cu^II­(en)₂][(EtO)₂P(S)S]₂ (en is ethyl­ene­di­amine) or [Cu(C₂H₈N₂)₂](C₄H₁₀O₂PS₂)₂, the Cu atom lies on a center of inversion and is coordinated in a slightly distorted square coordination geometry by four N atoms from two ethyl­enedi­amine mol­ecules. The diethyl di­thio­phosphate moieties, (EtO)₂P(S)S^?, act as counter‐anions.     

Determination of polyphenol component fractions and integral antioxidant capacity of Syrian aniseed and fennel seed extracts using GC–MS,HPLC analysis,and photochemiluminescence assay

The chemical components of both Syrian aniseed and fennel seeds collected from Idlib and Aleppo regions were identified using GC/MS spectrometry. Thirty-four component fractions representing an average of 98.5% of anise seed extract were characterized. The major average components were (E)-Anethole, Estragole, Limonene, Fenchone, Linalool, para-Anisaldehyde, (Z)-Anethole, and methyl chavicol. Also, thirty-one component fractions representing an average of 99.46% of fennel seed extract were identified. The major components were α-Pinene, α-Phellandrene, Fenchone, Methyl chavicol, Estragole, (Z)-Anethole, Limonene, 1,8-Cineole, Anisole-p-allyl, E,E-Farnesene, Estragole, (E)-Anethole, Anisaldehyde, and Carvacrol. The extract of aniseed was characterized by higher amounts of trans-anethole (52.2%) than fennel extract (38.3%). The integral antioxidant capacity (IAC) of two different extracts from both aniseed and fennel seeds have been determined using photochemiluminescence assay (PCL). The sum of antioxidant capacity (IAC) of hydrophilic and hydrophobic components in both aniseed and fennel seeds was determined, as a total equivalent per gram of dry material (nmolTE/gDM) at 166.69 ± 0.42 and 363.28 ± 1.11 nmol for hydrophilic and hydrophobic components, respectively. Eight major phenolic compounds known as possible antioxidant sources with their concentrations have been identified in both aniseed and fennel seeds by HPLC and GC–MS analysis.     

Geographical traceability of wheat and its products using multielement light stable isotopes coupled with chemometrics

The present study was aimed to investigate the variation of stable isotopic ratios of carbon, nitrogen, hydrogen, and oxygen in wheat kernel along with different processed fractions from three geographical origins across 5 years using isotope ratio mass spectrometry (IRMS). Multiway ANOVA revealed significant differences among region, harvest year, processing, and their interactions for all isotopes. The region contributed the major variability in the δ¹³C ‰, δ²H ‰, δ¹⁵N ‰, and δ¹⁸O‰ values of wheat. Variation of δ¹³C ‰, δ¹⁵N ‰, and δ¹⁸O ‰ between wheat whole kernel and its products (break, reduction, noodles, and cooked noodles) were ?0.7‰, and no significant difference was observed, suggesting the reliability of these isotope fingerprints in geographical traceability of wheat‐processed fractions and foods. A significant influence of wheat processing was observed for δ²H values. By applying linear discriminant analysis (LDA) to the whole dataset, the generated model correctly classified over 91% of the samples according to the geographical origin. The application of these parameters will assist in the development of an analytical control procedure that can be utilized to control the mislabeling regarding geographical origin of wheat kernel and its products.     

Micellization and Clouding Phenomenon of Phenothiazine Drug Promethazine Hydrochloride: Effect of NaCl and Urea Addition

Herein we report the micellization and clouding behavior of promethazine hydrochloride (PMT) in absence and presence of NaCl/ureas. The critical micelle concentration (CMC) of PMT is measured by conductivity method and the values decrease with increasing the NaCl concentration. With increasing the temperature, the CMC first increases then decreases. At 25°C, the maximum CMC values were obtained (with or without NaCl). The thermodynamic parameters are evaluated which indicate more stability of the PMT solution in presence of NaCl. PMT shows phase separation also. The cloud point (CP) of PMT decreases with increase in pH due to deprotonation of the drug molecules. Ureas decreased the CP and the behavior is explained on the basis of removal of water from the head group region.     

Photonic Patterns Printed in Chiral Nematic Mesoporous Resins

Chiral nematic mesoporous phenol‐formaldehyde resins, which were prepared using cellulose nanocrystals as a template, can be used as a substrate to produce latent photonic images. These resins undergo swelling, which changes their reflected color. By writing on the films with chemical inks, the density of methylol groups in the resin changes, subsequently affecting their degree of swelling and, consequently, their color. Writing on the films gives latent images that are revealed only upon swelling of the films. Using inkjet printing, it is possible to make higher resolution photonic patterns both as text and images that can be visualized by swelling and erased by drying. This novel approach to printing photonic patterns in resin films may be applied to anti‐counterfeit tags, signage, and decorative applications.     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Spectrophotometric Determination of Piroxicam via Chelation with Fe(III) in Commercial Dosage Forms

The objective of this work is to develop and validate spectrophotometric method for the determination of piroxicam in commercial dosage forms. The method is based on the chelation of the drug with Fe(III) to form pink coloured metal chelate at room temperature which absorbs maximally at 504 nm. Beer's law is obeyed over the concentration range of 8–160 μg mL^?1 (A = 1.07 × 10^?3 + 7.75 × 10^?3 C). Under the optimized experimental conditions, proposed method is validated as per the International Conference on Harmonisation guidelines. The limits of detection and quantitation for the proposed method are 0.775 and 2.348 μg mL^?1, respectively. The proposed method has been successfully applied to the determination of piroxicam in commercial dosage forms. The results are compared with the reference El‐Ries et al. spectrophotometric method.     

Effect of Oil Palm and Jute Fiber Treatment on Mechanical Performance of Epoxy Hybrid Composites

In this work, oil palm empty fruit bunch (EFB) and jute fibers were treated with 2-hydroxy ethyl acrylate (2-HEA) to improve interfacial bonding of oil palm EFB and jute fibers with epoxy matrix. Hybrid composites were fabricated by incorporation of modified oil palm EFB and jute fibers into an epoxy matrix by the hand lay-up technique. Mechanical (flexural and impact) and morphological properties of modified hybrid composites were measured. Results indicated that flexural and impact properties of modified fiber–reinforced hybrid composites improved as compared to untreated hybrid composites due to better fiber/matrix interfacial bonding, which was confirmed by scanning electron microscopy. We confirmed that treated oil palm/jute hybrid composite may be fabricated by advanced techniques such as resin transfer molding, extrusion, and injection molding for industrial applications in the automotive sector.