Improvement in the Performance of Composite Cathode via Solid Electrolyte for High Electrochemical Performance of Li–S Battery

Commercialization of Li–S in present scenario is obstructed by poor performance of cathode and its compatibility with electrolyte used. Here in this work, in order to improve the electrochemical performance all solid state Li–S battery, solid electrolyte (SE) formed by composition of lithium sulfide (Li₂S) and phosphorus pentasulfide (P₂S₅) combinedly called LPS is used. The modified carbon in the form of graphene oxide (GO) and reduced graphene oxide (rGO) as additive is used to provide better electron conduction pathway. High conductivity of the order 10⁻⁴ S cm⁻¹ of prepared LPS overcomes the major drawback of insulating nature of sulfur. The coin cells are fabricated by using above mentioned material as a cathode material, LPS as SE, and lithium foil as anode. The prepared nanocomposites are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) to study structural and morphological properties. Energy dispersive X-ray spectroscopy (EDS) images of the cathode surface confirms the uniform spreading of material. The electrochemical performance of coin cell is studied by Galvanostatic charge-discharge plot at 0.1 C to check the compatibility of composite and electrolyte prepared. The cells having additive material GO and rGO with host sulfur show better results as compared to the cell having pristine sulfur.     

A 236 GHz Fe3+ EPR Study of Nanoparticles of the Ferromagnetic Room-Temperature Semiconductor Sn1−x Fe x O2 (x = 0.005)

High-frequency (236 GHz) electron paramagnetic resonance (EPR) studies of Fe³⁺ ions at 255 K are reported in a Sn_1?x Fe _x O₂ powder with x = 0.005, which is a ferromagnetic semiconductor at room temperature. The observed EPR spectrum can be simulated reasonably well as the overlap of spectra due to four magnetically inequivalent high-spin (HS) Fe³⁺ ions (S = 5/2). The spectrum intensity is calculated, using the overlap I(BL) + (I(HS1) + I(HS2) + I(HS3) + I(HS4)) × exp(?0.00001B), where B is the magnetic field intensity in Gauss, I represents the intensity of an EPR line (HS1, HS2, HS3, HS4), and BL stands for the baseline (the exponential factor, as found by fitting to the experimental spectrum, is related to the Boltzmann population distribution of energy levels at 255 K, which is the temperature of the sample in the spectrometer). These high-frequency EPR results are significantly different from those at X-band. The large values of the zero-field splitting parameter (D) observed here for the four centers at the high frequency of 236 GHz are beyond the capability of X-band, which can only record spectra of ions with much smaller D values than those reported here.     

Tissue-Specific Regulation of HNK-1 Biosynthesis by Bisecting GlcNAc

Human natural killer—1 (HNK-1) is a sulfated glyco-epitope regulating cell adhesion and synaptic functions. HNK-1 and its non-sulfated forms, which are specifically expressed in the brain and the kidney, respectively, are distinctly biosynthesized by two homologous glycosyltransferases: GlcAT-P in the brain and GlcAT-S in the kidney. However, it is largely unclear how the activity of these isozymes is regulated in vivo. We recently found that bisecting GlcNAc, a branching sugar in N-glycan, suppresses both GlcAT-P activity and HNK-1 expression in the brain. Here, we observed that the expression of non-sulfated HNK-1 in the kidney is unexpectedly unaltered in mutant mice lacking bisecting GlcNAc. This suggests that the biosynthesis of HNK-1 in the brain and the kidney are differentially regulated by bisecting GlcNAc. Mechanistically, in vitro activity assays demonstrated that bisecting GlcNAc inhibits the activity of GlcAT-P but not that of GlcAT-S. Furthermore, molecular dynamics simulation showed that GlcAT-P binds poorly to bisected N-glycan substrates, whereas GlcAT-S binds similarly to bisected and non-bisected N-glycans. These findings revealed the difference of the highly homologous isozymes for HNK-1 synthesis, highlighting the novel mechanism of the tissue-specific regulation of HNK-1 synthesis by bisecting GlcNAc.     

Structural and electrical studies of template synthesized copper nanowires

The template strategy combined with electrodeposition technique has been used to produce copper nanowires in the cylindrical pores of track-etched polycarbonate membranes. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and UV–visible spectroscopy have been used to characterize as-prepared copper nanowires. XRD study shows the face centered cubic crystal structure of copper nanowires. Williamson–Hall (WH) analysis has been used to determine the crystallite size and microstrain induced due to lattice deformation. FESEM results reveal that copper nanowires are continuous, well aligned with uniform diameter and having high aspect ratio. The optical absorption spectra exhibit a strong peak at 568 nm attributed to the surface plasmon resonance. The current–voltage (I–V) characteristics show an ohmic behavior of the fabricated copper nanowires. The increase in resistivity of nanowires than that of bulk counterpart has been attributed to the surface and size effects in nanowires and explained in the light of Fuchs–Sondeimer and Mayadas–Shatzkes models.     

In silico mutagenesis and docking study of Ralstonia solanacearum RSL lectin: performance of docking software to predict saccharide binding

In this study, in silico mutagenesis and docking in Ralstonia solanacearum lectin (RSL) were carried out, and the ability of several docking software programs to calculate binding affinity was evaluated. In silico mutation of six amino acid residues (Agr17, Glu28, Gly39, Ala40, Trp76, and Trp81) was done, and a total of 114 in silico mutants of RSL were docked with Me-α-L-fucoside. Our results show that polar residues Arg17 and Glu28, as well as nonpolar amino acids Trp76 and Trp81, are crucial for binding. Gly39 may also influence ligand binding because any mutations at this position lead to a change in the binding pocket shape. The Ala40 residue was found to be the most interesting residue for mutagenesis and can affect the selectivity and/or affinity. In general, the docking software used performs better for high affinity binders and fails to place the binding affinities in the correct order.     

Aggregation of donor base stabilized 2-thienyllithium in a single crystal and in solution: distances from X-ray diffraction and the nuclear Overhauser effect

Various 2-thienyllithium derivatives were investigated in the solid state by X-ray diffraction and in solution by 2D NMR experiments. The determined structures of [(Et(2)O)Li(C(4)H(3)S)](4) (1), [(THF)(2)Li(C(4)H(3)S)](2) (2), [(DME)Li(C(4)H(3)S)](2) (3), [(TMEDA)Li(C(4)H(3)S)](2) (4), and [(PMDETA)Li(C(4)H(3)S)] (5) (DME = 1,2-dimethoxyethane, TMEDA = N,N,N',N'-tetramethylethylene-1,2-diamine, and PMDETA = N,N,N',N",N"-pentamethyldiethylenetriamine) were solved in nondonating toluene and provide firm ground for diffusion-ordered NMR spectroscopy as well as heteronuclear Overhauser enhancement NMR spectroscopy. The distance relation of nuclear Overhauser effects with a factor of r(-6) is employed to gain further insight into the aggregation degree of 1-5 in solution. Comparison of the slope provided by the linear region of the buildup curves and of the ∑r(-6) calculated distances from the crystal structures offers a handle to judge the structure retention versus conversion in solution. The structures of 3-5 are maintained in toluene solution. The data of 2, however, indicate a partial dissociation or a rapid exchange between the vertices of a tetrameric core and free THF molecules. Auxiliary exchange spectroscopy investigations showed that the signals of the nitrogen donor base containing compounds 4 and 5 exchange with the signals of nonlithiated thiophene. This is explained by exchange of the deuterium by a hydrogen atom via lithiation of toluene molecules.     

Effect of distortion on optical-fiber waveguides

We analyze the modes and coupling efficiency of asymmetric optical-fiber waveguides. We treated the step index-asymmetric optical-fiber waveguide as a boundary-value problem and obtain the expressions for the modes under logical assumptions. Using these expressions, we describe the propagation constants, mode delay, and power distribution of two asymmetric optical-fiber waveguides under consideration. Based on the perturbation theory, we also present the coupling coefficients of these asymmetric optical-fiber waveguides. We show that the waveguide parameters are considerably changed in the presence of distortion, and one can tune these parameters at the desired level by choosing suitable distortions.     

Identification of statistical regimes and crossovers in coherent random laser emission

We measure intensity statistics and identify statistical regimes and crossovers in random lasers based on nonresonant feedback. A single parameter extracted from an α-stable Levy fit is used to characterize the intensity distributions in all regimes. Measurements made over a range of scattering strengths, excitation energies, and sample sizes enable us to demarcate three regimes of intensity statistics and the corresponding crossovers. An initial subthreshold Gaussian regime abruptly transits into a Levy regime at the random lasing threshold, which is followed by a continuous gradual crossover toward a second Gaussian regime. We find that the prominence of the Levy regime depends upon the sample size.     

Aerosol-based coherent random laser

We demonstrate coherent random lasing from an aerosol of dye-doped microdroplets in air. The aerosol is in the form of a linear array of polydisperse, arbitrarily shaped, and randomly spaced microdroplets with average dimensions of about 30 μm. Upon optical excitation, ultranarrow lasing modes were observed in the emission along the axis of the linear array, while the transverse emission exhibited intrascatterer resonance peaks. Direct spatiospectral imaging and lasing threshold studies confirmed the origin of the lasing peaks to be from spatial modes that extended over the array of the polydisperse microdroplets.     

A Diels-Alder-based total synthesis of (-)-kainic acid

An efficient synthesis of (-)-kainic acid, through a high-pressure-promoted Diels-Alder cycloaddition of a vinylogous malonate derived from 4-hydroxyproline, is described. The bicyclic adduct could be converted into the natural product with complete stereocontrol.