Rheological properties of paraffin suspensions of surface-modified alumina powder for low-pressure injection moulding

Due to the hygroscopic nature of fine alumina powders, the presence of water may have a detrimental effect on the rheological properties of a suspension in melted paraffin for low-pressure injection moulding (LPIM). For this reason, a modification of the powder surface from hydrophilic to hydrophobic is essential for the production of high-quality moulded ceramics. In our paper, the efficiency of the application and the chemisorption of protective monomolecular layers of a long-chain carboxylic acid or its salts will be presented. The effect of the powder treatment on the shear viscosity and the viscoelastic properties of the suspensions for LPIM as well as on their stability in terms of the detrimental effect of water will be discussed.This paper was presented at the first Annual European Rheology Conference (AERC) held in Guimarães, Portugal, September 11-13, 2003.     

A new concept in lightning parameters measurement

Nowadays the electrical activity measured in tall objects has been widely characterized, but the collected data of lightning rods installed in buildings do not amount to enough to obtain reliable statistics. The measures stored at relatively few points are not representative of the different types of installations. Furthermore, the protection model applied for lightning air terminal installations is based on theoretical models. This paper describes the design of a micro-station to measure some lightning parameters in real lightning air terminal installations correlated to the nature of emplacement instead of triggering lightning or choosing points with a high number of lightning impacts.     

Efficient and reliable mixture critical points calculation by global optimization

Multicomponent systems may exhibit several critical points or no critical point at all. Local methods can find only one critical point for a given initial guess. Recently, several global methods have been proposed for finding all the solutions of the problem. In the present work, we propose a gradient-based calculation method using global optimization, with temperature and molar volume as primary variables, and with analytical partial derivatives calculated from a two-parameter cubic equation of state. The Tunneling global optimization method is used for finding all the global minima. The implementation is based on a unique feature of the Tunneling method, which is able to find efficiently and reliably multiple minima at the same level. Several mixtures from binaries to petroleum reservoir fluids are used to test the proposed method. Numerical experiments proved the efficiency and reliability of the Tunneling method for finding all mixture critical points.     

Assessment uncertainty associated to the analysis of organic compounds linked to particulate matter of atmospheric aerosols

Current work has evaluated uncertainty associated to quantification of several organic compounds present in particulate matter of atmospheric aerosols, setting out the stages of analytical procedure that contribute most to the global uncertainty. Several sources of uncertainty have been identified, which were clustered into five main contributions: sampling, extraction, clean-up, derivatization and analysis. A discussion of the main contributions to the overall uncertainty is reported, allowing authors to locate the largest ones and plan future improvements. Combined uncertainties ranged between 10-18% (alkanes), 12-16% (PAHs), 10-18% (alcohols) and 9-21% (acids). The analytical procedure was validated by analysing a standard reference material (SRM1649a, urban dust). Also, the proposed method was applied to the analysis of four samples of particulate matter.     

Exploring the emissive properties of new azacrown compounds bearing aryl, furyl, or thienyl moieties: a special case of chelation enhancement of fluorescence upon interaction with Ca(2+), Cu(2+), or Ni(2+)

Three new compounds bearing furyl, aryl, or thienyl moieties linked to an imidazo-crown ether system (1, 2, and 3) were synthesized and fully characterized by elemental analysis, infrared, UV-vis absorption, and emission spectroscopy, X-ray crystal diffraction, and MALDI-TOF-MS spectrometry. The interaction toward metal ions (Ca(2+), Cu(2+), Ni(2+), and Hg(2+)) and F(-) has been explored in solution by absorption and fluorescence spectroscopy. Mononuclear and binuclear metal complexes using Cu(2+) or Hg(2+) as metal centers have been synthesized and characterized. Compounds 2 and 3 show a noticeable enhancement of the fluorescence intensity in the presence of Ca(2+) and Cu(2+) ions. Moreover compound 3 presents a dual sensory detection way by modification of the fluorimetric and colorimetric properties in the presence of Cu(2+) or Hg(2+). EPR studies in frozen solution and in microcrystalline state of the dinuclear Cu(II)3 complex revealed the presence of an unique Cu(2+) type.     

Structural analysis, spectroscopic, and magnetic properties of the 1D triple-bridged compounds [M(dca)2(bpa)] (M = Mn, Fe, Co, Zn; dca = dicyanamide; bpa = 1,2-bis(4-pyridyl)ethane) and the 3D [Ni(dca)(bpa)2]dca·6H2O

The family of compounds [Mn(dca)(2)(bpa)] (1), [Fe(dca)(2)(bpa)] (2), [Co(dca)(2)(bpa)] (3), [Zn(dca)(2)(bpa)] (4), and [Ni(dca)(bpa)(2)]dca·6H(2)O (5), with dca = dicyanamide and bpa = 1,2-bis(4-pyridyl)ethane, has been synthesized. These compounds have been characterized by single crystal (1, 2, 4, and 5) and powder X-ray diffraction (3), by Fourier transform infrared (FTIR), UV-vis, and electron paramagnetic resonance (EPR) spectroscopies, and by magnetic measurements. Compound 1 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 16.757(6), b = 9.692(3), and c = 13.073(4) ?, and β = 123.02(2)°; Compound 2 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 16.588(5), b = 9.661(3), c = 12.970(5) ?, and β = 123.16(3)°; Compound 4 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 16.519(2), b = 9.643(2), c = 12.943(2) ?, and β = 123.15(1)°; Compound 5 crystallizes in the monoclinic C2/c space group, Z = 4, with a = 18.504(4), b = 19.802(3), and c = 8.6570(18) ?, and β = 99.74(2)°. The compounds 1-4 are isostructural and show a one dimensional (1D) disposition, with the metal(II) ions bridged by double μ(1,5) dca ligands and unusually by a third bridge consisting of the bpa ligand, which adopts a very low torsion angle to accommodate in the structure. This kind of structure is unusual, even considering the voluminous bpa bridge. The compound 5 shows a 3D structure with layers of Ni-bpa joined by single dca bridges. Magnetic susceptibility measurements show antiferromagnetic couplings, increasing for 1-3. Compound 5 shows very slight antiferromagnetic interactions.     

A Comparative Kinetic and Mechanistic Study Between Tetrahydrozoline and Naphazoline Toward Photogenerated Reactive Oxygen Species

Kinetic and mechanistic aspects of the vitamin B2 (riboflavin [Rf])-sensitized photo-oxidation of the imidazoline derivates (IDs) naphazoline (NPZ) and tetrahydrozoline (THZ) were investigated in aqueous solution. The process appears as important on biomedical grounds, considering that the vitamin is endogenously present in humans, and IDs are active components of ocular medicaments of topical application. Under aerobic visible light irradiation, a complex picture of competitive interactions between sensitizer, substrates and dissolved oxygen takes place: the singlet and triplet (³Rf*) excited states of Rf are quenched by the IDs: with IDs concentrations ca.  5.0 m m and 0.02 m m Rf, ³Rf* is quenched by IDs, in a competitive fashion with dissolved ground state oxygen. Additionally, the reactive oxygen species: O₂(¹Δ_g), O₂^•−, HO^• and H₂O₂, generated from ³Rf* and Rf ^•−, were detected with the employment of time-resolved methods or specific scavengers. Oxygen uptake experiments indicate that, for NPZ, only H₂O₂ was involved in the photo-oxidation. In the case of THZ, O₂^•−, HO^• and H₂O₂ were detected, whereas only HO^• was unambiguously identified as THZ oxidative agents. Upon direct UV light irradiation NPZ and THZ generate O₂(¹Δ_g.), with quantum yields of 0.2 (literature value, employed as a reference) and 0.08, respectively, in acetonitrile.     

Platinum nanoparticle-modified electrodes, morphologic, and electrochemical studies concerning electroactive materials deposition

The present work describes the synthesis of platinum nanoparticles followed by their electrophoretic deposition onto transparent fluorine-doped tin oxide electrodes. The nano-Pt-modified electrodes were characterized by voltammetric studies in acidic solutions showing a great electrocatalytic behavior towards H⁺ reduction being very interesting for fuel cell applications. Morphological characterization was performed by atomic force microscopy on different modified electrodes showing a very rough surface which can be tuned by means of time of deposition. Also, nickel hydroxide thin films were galvanostatically grown onto these electrodes showing an interesting electrochemical behavior as sharper peaks, indicating a faster ionic exchange from the electrolyte to the film.