Silicon tetrafluoride : Preparation and reduction with lithium aluminium hydride

Pure silicon tetrafluoride can be prepared in 66% yield from silicon tetrachloride by refluxing with lead fluoride in acetonitrile. The gas can be reduced to pure silane by lithium aluminum hydride in diethyl ether.     

Synthesis, fluorescence and photoisomerization studies of azobenzene-functionalized poly(alkyl aryl ether) dendrimers

A series of azobenzene-functionalized poly(alkyl aryl ether) dendrimers have been synthesized and their photochemical and photophysical properties in solution and as thin films have been investigated. Although the photochemical behavior of the azodendrimers in solution indicated that the azobenzene units behave independently, very similar to the constituent monomer azobenzene unit, the properties of thin solid films of the dendrimers were distinctly different. The azodendrimers, AzoG1, AzoG2, and AzoG3 were observed to form stable supercooled glasses, which showed long-wavelength absorption and red emission characteristics of J-aggregates of the azobenzene chromophores. Reversible photoinduced isomerization of the azodendrimers in the glassy state is described.     

Design of a capillary-microreactor for efficient Suzuki coupling reactions

A Pyrex glass capillary (0.4 mm internal diameter) microreactor was developed and used for Suzuki coupling reactions. Capillary-microreactors are more attractive than photolithographic microfluidic devices in terms of simplicity, low cost and ease of handling. Compared with the conventional synthesis procedure, our approach of using a capillary-microreactor offers a convenient and highly efficient means to optimize reaction conditions and the performance of catalysts. The procedure exhibits good precision, reproducibility and high reaction yield for a range of reactants investigated.     

THE PHOTOSENSITIZERS BENZOPHENOXAZINE and THIAZINES: COMPREHENSIVE INVESTIGATION OF PHOTOPHYSICAL and PHOTOCHEMICAL PROPERTIES

Eight differently substituted title dye compounds have been investigated regarding intersystem crossing, triplet state, fluorescence and singlet excited state pKa properties. In general, non-halogenated oxazines and thiazines as well as a mono bromooxazine show very low triplet quantum yields, phi tau (less than 0.03) and relatively long triplet lifetimes (approximately 40 microseconds) in acidic methanol. The phi tau data correlate well with known singlet oxygen yields. In basic methanol no triplet transient is observed but a significant yield of a ground state transient protonated (base dye) form is produced with a short lifetime, approximately 400 ns. Fluorescence can be seen simultaneously from both the excited base and the protonated base dye forms in basic methanol. For iodinated oxazine or thiazines, the triplet yield increases and can be as high as 0.5 (diiodo case) in acidic methanol. The triplet lifetimes are further shortened to approximately 10 microseconds compared to the non-iodinated derivatives above. The triplet yields of the iodo compounds are higher or equal to known singlet oxygen yields. In basic methanol triplet yields up to 0.2 can be seen, the triplet lifetime are shortened still further to 1 microsecond but no observable protonated form is produced (in distinction to the non-iodinated cases). Consideration is given to the correlation of triplet and singlet oxygen yields, ground and excited pKa properties, spin-orbit coupling and internal conversion properties, solvent effects, and phototherapeutic activity of these dyes.     

Preparation of cobalt doped γ-Fe2O3 and Mn-Zn ferrites by the thermal decomposition of the hydrazine precursors

Fine particle cobalt doped-Fe₂O₃ and Mn-Zn ferrites have been prepared by the thermal decomposition of N₂H₅Co _x Fe_1–x (N₂H₃COO)₃.H₂O wherex=1–10 atom% and (N₂H₅)₃Mn_xZn_1–x Fe₂(N₂H₃COO)₉· 3H₂O wherex=0.2–0.8, respectively. Formation of these oxide materials has been confirmed by thermogravimetry and X-ray powder diffraction patterns. The fine particle nature of these oxide materials is evident from particle size analysis and surface area measurements.

---

Zusammenfassung Mit fein verteiltem Kobalt versetztes-Fe₂O₃ sowie Mn-Zn Ferrite wurden durch thermische Zersetzung von N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O mit jc=1–10 Atomprozent bzw. (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉·3H₂O mitx=0,2–0,8 hergestellt. Die Bildung dieser Oxidstoffe wurde durch Thermogravimetrie und Pulverdiffraktionsmethoden bekräftigt. Die Feinkornstruktur dieser Oxidstoffe wird durch Korngrößenverteilungs- und Oberflächenmessungen augenscheinlich.

---

N₂H₅Co _x Fe_1–x (N₂H₃COO)₃·H₂O, x-1–10 %, (N₂H₅)₃Mn _x Zn_1–x Fe₂(N₂H₃COO)₉ · 3H₂O, x=0,2–0,8, , , -Fe₂O₃ Mn-Zn . . .

     

Phase equilibria for binary systems of octane boosters with 2,2,4-trimethylpentane

Isobaric vapor–liquid equilibrium data at 95.96 kPa for the three binary systems of 2,2,4-trimethylpentane with methyl tert-butyl ether, di-isopropyl ether and dimethoxymethane are determined. A Swietoslawski type ebulliometer is used for the measurements. The experimental T–x data are used to estimate Wilson parameters and the parameters, in turn, are used to calculate vapor phase compositions and activity coefficients. All the systems studied here do not exhibit azeotropes and behave like non-ideal solutions.     

Temperature Dependent Dielectric Relaxation in Solvent Mixtures at Microwave Frequencies

By the use of time domain reflectometry method, dielectric measurements were carried out on dimethylformamide‐2‐nitrotoluene solvent mixtures in the frequency range 10 MHz‐20 GHz, at various temperatures from 15 °C to 45 °C. These solvent mixtures as well as pure solvents display a Debye type dispersion. Their frequency dependent dielectric properties can be summarized by the three parameters in the Debye equation: a static permittivity, permittivity at high frequency and a dielectric relaxation time constant. The free energy of activation for dipolar relaxation process and the Kirkwood correlation factor were determined using these fitting parameters for these solvent mixtures at various concentrations and temperatures. By using these dielectric parameters, the excess permittivity and excess inverse relaxation time is obtained. The excess permittivity is found to be positive for all concentrations and temperatures whereas the excess inverse relaxation time is negative.     

Synthesis and antimicrobial activity of N-(substituted)-N'-(2,3-dihydro-2-oxido-5-benzoyl-1H-1,3,2-benzodiazaphosphol-2-yl) ureas

N-(substituted)-N'-(2,3-dihydro-5-benzoyl-2-oxido-1H-1,3,2-benzodiazaphosphol-2-yl) ureas were synthesized by reacting 3,4-diaminobenzophenone (4) with different chlorides of carbamidophosphoric acids (3) in the presence of triethylamine at 40-45 degrees C. Their 1H-, 13C- and 31P-NMR spectral data are discussed. The title compounds were screened for antifungal and antibacterial activity against the fungi Aspergillus niger and Fusarium solani and bacteria Escherichia coli and Staphylococcus aureus. These compounds showed higher antibacterial activity when compared with antifungal activity.     

Synthesis of peptides employing Fmoc-amino acid chlorides and commercial zinc dust

Coupling of Fmoc-amino acid chlorides mediated by activated commercial zinc dust for the synthesis of peptides is described. The reaction is carried out in an organic medium. The necessity of using an inorganic base like NaHCO₃/Na₂CO₃ or an organic base like DIEA/NMM/TEA/pyridine is circumvented. The coupling is reasonably fast, clean, racemization free and high yielding.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.