New Acetylcholinesterase‐Inhibitory Pregnane Glycosides of Cynanchum atratum Roots

Three new pregnane glycosides, cynatroside A ( 1 ), cynatroside B ( 2 ), and cynatroside C ( 3 ), isolated from the roots of Cynanchum atratum (Asclepiadaceae), were characterized as 7β‐{[O‐α‐L ‐cymaropyranosyl‐(1→4)‐O‐β‐D ‐digitoxopyranosyl‐(1→4)‐β‐D ‐oleandropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐6α‐hydroxy‐4b‐ methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 1 ), 7β‐{[O‐β‐D ‐cymaropyranosyl‐(1→4)‐O‐α‐L ‐diginopyranosyl‐(1→4)‐β‐D ‐cymaropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐2,6α‐dihydroxy‐4b‐methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 2 ), and 7β‐{[O‐α‐L ‐cymaropyranosyl‐(1→4)‐O‐β‐D ‐digitoxopyranosyl‐(1→4)‐β‐L ‐cymaropyranosyl]oxy}‐3,4,4a,4b,5,6,7,8,10,10a‐decahydro‐2,6α‐dihydroxy‐4b‐methyl‐2‐(2‐methyl‐3‐furyl)phenanthren‐1(2H)‐one ( 3 ), respectively. In addition, ten known constituents were identified, i.e., cynascyroside D ( 4 ), glaucoside C ( 5 ), glaucoside D ( 6 ), atratoside A ( 7 ), 2,4‐dihydroxyacetophenone ( 8 ), 4‐hydroxyacetophenone ( 9 ), syringic acid ( 10 ), azelaic acid ( 11 ), suberic acid ( 12 ), and succinic acid ( 13 ). Among these compounds, 1 – 4 significantly inhibit acetylcholinesterase activity.     

Preparation of nanoporous MgO-coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells

Sol-gel-derived Mg(OH)(2) gel was coated onto TiO(2) nanoparticles, and the subsequent thermal topotactic decomposition of the gel formed a highly nanoporous MgO crystalline coating. The specific surface area of the electrode that was prepared from the core-shell-structured TiO(2) nanoparticles significantly increased compared with that of the uncoated TiO(2) electrode. The increase in the specific surface area of the MgO-coated TiO(2) electrode was attributed to the highly nanoporous MgO coating layer that resulted from the topotactic reaction. Dye adsorption behavior and solar cell performance were significantly enhanced by employing the MgO-coated TiO(2) electrode. Optimized coating of a MgO layer on TiO(2) nanoparticles enhanced the energy conversion efficiency as much as 45% compared to that of the uncoated TiO(2) electrode. This indicates that controlling the extrinsic parameters such as the specific surface area is very important to improve the energy conversion efficiency of TiO(2)-based solar cells.     

A polymer-based microfluidic device for immunosensing biochips

This paper describes the design, fabrication, and test of a PDMS/PMMA-laminated microfluidic device for an immunosensing biochip. A poly(dimethyl siloxane)(PDMS) top substrate molded by polymer casting and a poly(methyl methacrylate)(PMMA) bottom substrate fabricated by hot embossing are bonded with pressure and hermetically sealed. Two inlet ports and an air vent are opened through the PDMS top substrate, while gold electrodes for electrochemical biosensing are patterned onto the PMMA bottom substrate. The analyte sample is loaded from the sample inlet port to the detection chamber by capillary force, without any external intervening forces. For this and to control the time duration of sample fluid in each compartment of the device, including the inlet port, diffusion barrier, reaction chamber, flow-delay neck, and detection chamber, the fluid conduit has been designed with various geometries of channel width, depth, and shape. Especially, the fluid path has been designed so that the sample flow naturally stops after filling the detection chamber to allow sufficient time for biochemical reaction and subsequent washing steps. As model immunosensing tests for the microfluidic device, functionalizations of ferritin and biotin to the sensing surfaces on gold electrodes and their biospecific interactions with antiferritin antiserum and streptavidin have been investigated. An electrochemical detection method for immunosensing by biocatalyzed precipitation has been developed and applied for signal registration. With the biochip, the whole immunosensing processes could be completed within 30 min.     

A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.     

Resveratrol derivatives potently induce apoptosis in human promyelocytic leukemia cells

Resveratrol has been shown to possess antioxidant and anticancer activities, but little is known on the effect of resveratrol derivatives. Recently we have isolated resveratrol and its dimers and trimers from peony (Paeonia lactiflora) seeds, and reported their strong antioxidant and cytotoxic activity. In the present study, we have evaluated cellular effects of resveratrol derivatives; viniferin, gnetin H, and suffruticosol B on the proliferation and apoptosis in HL-60 cells in vitro. All resveratrol and its derivatives reduced viability of HL-60 cells in a dose-dependent manner with their IC(50) values of 20-90 microM. Ascending orders of IC(50) values were suffruticosol B, gnetin H, viniferin and resveratrol respectively. HL-60 cells treated with the four stilbenes exhibited the distinct morphological changes characteristics of cell apoptosis such as chromatin condensation, apoptotic bodies, and DNA fragmentations. A time-dependent histogram of the cellular DNA analyzed by flow cytometry revealed a rapid increase in subdiploid cells and a concomitant decrease in diploid cells exposed to 100 microM resveratrol for 0-24 h. Cells treated with 25 microM of resveratrol, viniferin, gnetin H, and suffruticosol B for 24 h resulted in increment of sub-G1 population by 51, 5, 11 and 59%, respectively. Treatment of cells with 0-20 microM resveratrol for 5 h produced a concentration-dependent decrease in cytochrome P450 (CYP) 1B1 mRNA levels. Suffruticosol B also suppressed CYP1B1 gene expression. These results demonstrated that resveratrol oligomers also strongly suppressed HL-60 cell proliferation, and induced DNA damage. In addition, CYP1B1 gene supression may suggest an involvement in the resveratrol-induced apoptosis in HL-60 cells.     

Role of sphingomyelin-MAPKs pathway in heat-induced apoptosis

The role of sphingomyelinase (SMase) activation and mitogen activated protein kinases (MAPKs) activation in cellular apoptosis was investigated during the hyperthermic treatment of HL-60 human leukemia cells. Treating the cells for 1 h at 43(o)C caused more than 50% of cellular apoptosis within several hours. The neutral-SMase activity in the cells treated for 1 h at 42(o)C was slightly increased but decreased in the cells treated at 43(o)C or 44(o)C for the same period whereas the acid SMase activity was slightly increased after heating the cells at 42(o)C and 43(o)C and markedly increased at 44(o)C for 1 h. Treatment of cells with inhibitors of SMase activation and ceramide formation significantly reduced the heat-induced apoptosis. Three major families of mitogen-activated protein kinases (MAPKs), i.e. ERK1/2, p38 and JNK, were activated by the hyperthermic treatment of cells. Inhibition of ERK1/2 with PD98059 exerted little effect on the heat-induced apoptosis and p38 inhibition with SB203580 slightly lessened apoptosis whereas, inhibition of JNK with SP600125 markedly suppressed the heat-induced apoptosis. These results indicate that heat-shock induced the activation of SMase, particularly acid-SMase, thereby causing apoptosis and that JNK played a pivotal role in heat-induced apoptosis in HL-60 leukemia cells.     

Reversible affinity interactions of antibody molecules at functionalized dendrimer monolayer: affinity-sensing surface with reusability

We described reversible affinity interactions of antibody molecules at a chemically functionalized electrode surface for a repeatedly renewable affinity-biosensing interface. Underlying biofunctionalizable monolayers were constructed with poly(amidoamine) dendrimers, whose surface chain-end groups were double-functionalized with biotinyl ligand and ferrocenyl groups for biospecific recognition and electron transfer reactions, respectively. Functionalized monolayers on gold electrodes provide platform surfaces for biospecific recognition reaction with monoclonal anti-biotin antibody molecules. Bound antibody molecules were dissociated from the surface via displacement reaction by the addition of free biotin in solution, enabling the affinity surface to be renewed and repeatedly utilized. Tracking of the association/dissociation reaction cycles were performed by registering the bioelectrocatalytic currents at the electrode using glucose oxidase (GOx) as a signal generator and ferrocenyl-tethered dendrimer (Fc-D) as an electron transferring mediator in electrolyte. Shielding of the affinity surface by biospecifically bound antibody molecules caused hindrance in electron transfer, resulting in reduced signal from cyclic voltammetry. By the displacement reaction using free biotin, bound antibody molecules were dissociated from the surface and the bioelectrocatalytic signal was restored. With the affinity surfaces constructed in this work, continuous association/dissociation reactions have been successfully accomplished, providing a possibility of reusable affinity biosensing interface.     

Preparation of water‐soluble,syndiotacticity‐rich,low molecular weight poly(vinyl alcohol) microfibrils in high yields with the low‐temperature polymerization of vinyl pivalate in tetrahydrofuran and saponification

To prepare water‐soluble, syndiotacticity‐rich poly(vinyl alcohol) (PVA) microfibrils for various industrial applications, we synthesized syndiotacticity‐rich, low molecular weight PVA by the solution polymerization of vinyl pivalate (VPi) in tetrahydrofuran (THF) at low temperatures with 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN) as an initiator and successive saponification of poly(vinyl pivalate) (PVPi). Effects of the initiator and monomer concentrations and the polymerization temperature were investigated in terms of the polymerization behaviors and molecular structures of PVPi and the corresponding syndiotacticity‐rich PVA. The polymerization rate of VPi in THF was proportional to the 0.91 power of the ADMVN concentration, indicating the heterogeneous nature of THF polymerization. The low‐temperature solution polymerization of VPi in THF with ADMVN proved to be successful in obtaining water‐soluble PVA with a number‐average degree of polymerization (P_n) of 300–900, a syndiotactic dyad content of 60–63%, and an ultimate conversion of VPi into PVPi of over 75%. Despite the low molecular weight of PVA with P_n = 800, water‐soluble PVA microfibrillar fibers were prepared because of the high level of syndiotacticity. In contrast, for PVA with P_n = 330, shapeless and globular morphologies were observed, indicating that molecular weight has an important role in the in situ fibrillation of syndiotacticity‐rich PVA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1103–1111, 2002     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300