Finite creep deformations of thick-walled tubes

As an application of the theory of finite deformations to creep problems, the steady-state creep of pressurized thick-walled tubes is analysed. Constitutive equations of steady-state creep in case of finite deformations are first derived by assuming the Prager-Drucker potential and Norton's law. Closed form solutions are obtained, and compared with the corresponding experiment as well as the analysis disregarding the effect of J₃ and that of infinitesimal deformations. The relation between the present analysis and that of Rimrott, performed by modifying the procedure of infinitesimal deformations, is also discussed.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXX. Preparation of polystyrene‐core nanospheres having a poly(2‐methacryloyloxyethyl phosphorylcholine) corona

Polystyrene core nanosphere particles possessing 2‐methacryloyloxyethyl phosphorylcholine (MPC) polymers on the corona were prepared by the free radical polymerization of hydrophilic polyMPC macromonomer and hydrophobic styrene with AIBN as a radical initiator in ethanol as a polar solvent. The morphology of the nanospheres was observed by transmission electron micrograph (TEM). The nanospheres were spherical in form and have a narrow size distribution. Their sizes could be controlled by varying the molecular weight of the macromonomer and the amount of it in feed. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces suggested that polyMPC chains were located favorably on the surface of the nanosphere. The nanospheres having the polyMPC chains on their surfaces can be significant and useful materials in technological and medical fields. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3052–3058, 2000     

Nanosphere formation in copolymerization of methyl methacrylate with poly(ethylene glycol) macromonomers

Polymeric nanospheres consisting of poly(methyl methacrylate) (PMMA) cores and poly(ethylene glycol) (PEG) branches on their surfaces were prepared by free radical copolymerization of methyl methacrylate (MMA) with PEG macromonomers in ethanol/water mixed solvents. PEG macromonomers having a methacryloyl (MMA‐PEG) and p‐vinylbenzyl (St‐PEG) end group were used. It has become clear that the obtained polymer dispersions form three kinds of states, particle dispersion (milky solution), clear solution, and gel/precipitation. It was found that the reaction parameters such as MMA concentration, molecular weight, and concentration of PEG macromonomers, and water content can affect nanosphere formation in a copolymerization system. The water volume fraction of mixed ethanol/water solvents affected the particle size of the nanospheres. These differences in the formation of nanospheres were due to the solvophilic/solvophobic balance between the copolymers and solvents during the self‐assembling process of the copolymers. The sizes of nanospheres can be controlled by varying concentration of PEG macromonomer and water content in solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1811–1817, 2000     

Radical polymerization of ortho-(1,3-dioxolan-2-yl)phenyl ethyl fumarate involving intramolecular hydrogen abstraction and ring opening of cyclic acetal

The polymerization of o-(1,3-dioxolan-2-yl)phenyl ethyl fumarate (DOPEF) initiated with dimethyl 2,2′-azobisiso-butyrate (MAIB) was studied kinetically in benzene. The polymerization rate (R_p) at 60°C was given by R_p = k [MAIB]^0.76 [DOPEF]^0.71. The overall activation energy of polymerization was calculated to be 98.3 kJ/mol. The number-average molecular weight of resulting poly(DOPEF) was in the range of 1000–3100. ¹H- and ¹³C-NMR spectra of resulting polymers revealed that the radical polymerization of DOPEF proceeds in a complicated manner involving vinyl addition, intramolecular hydrogen abstraction, and further ring opening of the cyclic acetal at higher temperatures. From the copolymerization of DOPEF (M₁) and styrene (St) (M₂) at 60°C, the monomer reactivity ratios were obtained to be r₁ = 0.02 and r₂ = 0.20, the values of which are similar to those of the copolymerization of ethyl o-formylphenyl fumarate and St. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 563–572, 1998     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XVIII. Poly(styrene) nanospheres with novel thermosensitive poly(N-vinylisobutyramide)s on their surfaces

Poly(styrene) nanospheres having poly(N-vinylisobutyramide)s (PNVIBA)s, which are structurally the same composition as well-known thermosensitive poly(N-isopropylacrylamide)s (PNIPAAm)s and show the thermosensitive property as well, on their surfaces were synthesized by the free radical polymerization of hydrophilic PNVIBA macromonomers and hydrophobic styrene with AIBN as a radical initiator in ethanol as a polar solvent and were characterized in regard to their thermosensitive properties. Both the NVIBA oligomers and PNVIBA macromonomers that we synthesized showed a lower critical solution temperature (LCST) at around 40°C, as was predicted by our previous research. The nanospheres were spherical in form and have a narrow size distribution. Their sizes could be controlled by varying the molecular weight of the macromonomers and the amount of it in feed. The size in the nanosphere became small above the LCST of the corresponding macromonomer, possibly due to thermosensitive shrinking of the PNVIBA on the nanosphere surface, while transmittance of its dispersion did not change at all at studied temperature range. The nanospheres having the PNVIBA on their surfaces, which response sharply to atmospheres such as dispersion temperature, can be significant and useful materials in technological and medical fields. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2581–2587, 1998     

Synthesis and functionalities of poly(N-vinylalkylamide). V. Control of a lower critical solution temperature of poly(N-vinylalkylamide)

N-vinyl-n-butyramide (NVBA), N-vinylisovaleramide (NVIVA), and N-vinyl-n-valeramide (NVVA), which are N-vinylalkylamides with different alkyl groups were synthesized and their solution behavior in a polymeric form was examined. Copolymers of N-vinylisobutyramide (NVIBA) with N-vinylacetamide (NVA), NVIBA with NVVA, and NVVA with NVA were prepared by the solution polymerization to control the LCSTs. The resultant polyNVBA showed a lower critical solution temperature (LCST) sharply at 32°C, but polyN-vinylisovaleramide (polyNVIVA) and polyN-vinyl-n-valeramide(polyNVVA) that have n-butyl and isobutyl groups, respectively, on their side chains were insoluble even in cold water. The water solubility of the resulting polymers was found to vary, depending on the molecular shapes as well as the side chain length of the alkyl groups in question. The copolymers consisting of NVVA, NVIBA, and NVA in water showed LCSTs sharply between 10 and 90°C, depending on changes in their comonomer content. It was found that the changes in LCST that are caused by the incorporation of comonomers are due to changes in the overall hydrophilicity of the polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3087–3094, 1997     

A ferroelectric barium titanate,BaTi2O5

The crystal structure of monobarium dititanium pentaoxide, BaTi₂O₅, synthesized by a floating‐zone method, was studied by X‐ray diffraction. Previous reports describe the structure as being in the monoclinic centrosymmetric space group C2/m. We have recently found that this material exhibits ferroelectricity, and therefore BaTi₂O₅ should have lower symmetry. The crystal structure of BaTi₂O₅ was refined in space group C2, revealing a displacement of the Ti atoms along the b axis. This result is consistent with the fact that the ferroelectricity of BaTi₂O₅ was only observed along the b axis.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXIII. Particle size control of poly(ethylene glycol)-coated polystyrene nanoparticles prepared by macromonomer method

Monodisperse polymeric nanospheres, which consist of polystyrene cores and poly(ethylene glycol) (PEG) branches on their surfaces, were prepared by the dispersion copolymerization of styrene (St) with PEG macromonomers that had a methacryloyl (MMA-PEG) or p-vinylbenzyl (St-PEG) end group in various organic solvent/water media. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces indicated that PEG macromonomer chains were favorably located on their surfaces. The morphologies of the nanospheres were observed via a scanning electron micrograph (SEM), and particle sizes were estimated by a submicron particle analyzer. When both the concentration of macromonomers and molecular weight were higher, small nanospheres in diameter were obtained. Larger nanospheres in diameter were obtained using macromonomers with low molecular weight at lower concentration. The functions that correlate the diameter (D_n) on different concentration units were D_n = K[St]^0.64[MMA-PEG]^{−0.53±0.01}[I]^−0.49 and D_n = K[St]^0.80[St-PEG]^{−0.69±0.01}[I]^−0.22, where [I], [St], [MMA-PEG], and [St-PEG] are initiator, styrene, MMA-PEG, and St-PEG macromonomer concentration in feed, respectively. When the reaction parameters such as the molecular weight of the macromonomers were properly chosen, the particle size could be controlled in a range from ca. 80 to 3100 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2155–2166, 1999     

Interaction of a practical fluoran-based black color former with possible color developers, various acids and magnesium ions, in acetonitrile

For the purpose of improving the visible method of γ-rays detection, detailed conditions with various acids have been examined for the color development of a fluoran-based black color former in acetonitrile. It is suggested that the protons (H⁺), which may be produced from acid generators by γ-ray radiation, can be properly detected by the color development of the black color former containing proper kinds and concentrations of bases. Reversible decolorization through the interaction between Mg²⁺ and polyamines (acyclic and macrocyclic) has been examined in order to reconfirm that the colored zwitterion is produced by the direct chemical interaction with Mg (ClO₄)₂ in the fluoran dye–acetonitrile solution.