Grafting Vinyl Monomers onto Silk Fibers. XIII. Graft Copolymerization of Methyl Methacrylate onto Silk Using Fe3+−Cysteine Redox System

The graft copolymerization of methyl methacrylate onto silk fibers initiated by the ferric chloride-eysteine redox system has been investigated in aqueous medium. The rate of grafting was calculated by varying the concentrations of monomer, initiator, acidity of the medium, cysteine, and temperature. The percentage of grafting increases with an increase of Fe³⁺ concentration up to 2,5 × 10^?3 mol/L and thereafter it decreases. The graft yield increases steadily upon increasing the monomer concentration. The graft yield also increases with increasing cysteine concentration up to 0.5 × 10^?3 mol/L and then decreases. The effect of the perchloric acid concentration, temperature, solvents, and certain neutral salts on graft yield has also been investigated and a suitable reaction scheme has been proposed.     

Hexavalent Chromium-Thioacetamide Redox System Initiated Polymerization of Acrylonitrile

Polymerization of acrylonitrile initiated by the Cr⁶⁺/thioacetamide redox system was studied in nitrogen atmosphere in the temperature range 35–45°C. The rate of polymerization and the rate of Cr⁶⁺ ion disappearance were measured. The effect of certain water-miscible organic solvents, neutral electrolytes, and complexing agents on the rate of polymerization was investigated. Chromic acid alone did not initiate the polymerization under deaerated and undeaerated conditions. Depending on the results obtained, a suitable kinetic scheme was proposed and various rate parameters were evaluated.     

Grafting Vinyl Monomers onto Poly(ethylene Terephthalate) (PET). IV. Graft Copolymerization of Methyl Methacrylate onto PET Fibers Using Acetyl Acetonate Complexes of Mn(III), Co(III), and Fe(III)

The graft copolymerization of methyl methacrylate onto poly-(ethylene terephthalate) using metal complexes of Mn³⁺, Co³⁺, and Fe³⁺ as initiators was studied. The rate of polymerization, R_p, increased with increasing complex concentrations.

The rate of polymerization was also studied by varying monomer concentrations. Increasing monomer concentrations, the rate of polymerization increases significantly. The graft yield increases with increasing temperature within the range 60–75°C. The graft yield is medium dependent. A suitable kinetic scheme has been pictured and rate equations have been derived.     

Polymerization of Methyl Methacrylate: Kinetics of the Reaction Initiated by the Mn(III)-1,2-Propanediol Redox System

Kinetics of polymerization of methyl methacrylate initiated by Mn³⁺/1,2-propanedlol has been investigated in aqueous sulfuric acid at the temperature range of 25–35°C. The rate of polymerization (R_p) and the rate of manganic ion disappearance (-R_Mn) have been computed. The effects of organic solvents, certain cationic and anionic detergents, added electrolytes on the initial rate of polymerization, and maximum conversion have been examined. Depending on the kinetic results, a reaction scheme has been suggested involving the formation of a complex between Mn³⁺ and the alcohol, which subsequently decomposed in an unimolecular step to generate the initiating free-radical which initiates polymerization and termination of the growing polymer chain by metal ion.     

Grafting Vinyl Monomers onto Silk Fibers. V. Graft Copolymerization of Methyl Methacrylate onto Silk with Potassium Permanganate as Initiator

The graft copolymerization of methyl methacrylate onto silk fibers in aqueous solution with the use of manganese (IV) ions as initiator was investigated. The rate of grafting was determined by varying monomer, acidity of the medium, temperature, nature of silk, and the reaction medium. The graft yield increases significantly with increase of manganese (IV) concentration up to 15 meq/liter; with further increase of manganese (IV) concentration, the graft yield decreases. The effect of the increase of monomer concentration brings about a significant enhancement in the graft yield up to 7%, and with further increase of monomer concentration the graft yield decreases. The graft yield is considerably influenced by chemical modification prior to grafting. The effect of some inorganic salts and anionic surfactants on the rate of grafting has been investigated.     

Antibacterial,antioxidant and anthelmintic studies of inclusion complexes of some 4-arylidenamino-5-phenyl-4H-1,2,4-triazole-3-thiols

A series of 4-arylidenamino-5-phenyl-4H-1,2,4-triazole-3-thiols have been synthesised and their inclusion complexes have been prepared with β-cyclodextrin. The compounds and their inclusion complexes have been characterised by studying their physical and spectral properties. The thermodynamic stability constant and free energy of activation have been determined to know the stability of inclusion complexes. Finally, the compounds and their inclusion complexes are screened for antibacterial, antioxidant and anthelmintic activities. It is found that inclusion complexes of the newly synthesised compounds have appreciable stability and inclusion complex formation increases the antibacterial, antioxidant and anthelmintic activities significantly as compared to naked compound.     

Thermal properties and cold crystallization kinetics of surface-treated banana fiber (BF)-reinforced poly(lactic acid) (PLA) nanocomposites

Nucleation capacity of organically modified natural montmorillonite within the surface-treated banana fiber (BF)-reinforced PLA biocomposites has been studied using DSC analysis in the present investigation. Both the surface treatments and nanoclays play vital roles in the variation in nucleation process of PLA during cold crystallization process. Biocomposite made up of silane-treated BF and its bionanocomposite prepared using cloisite 30B (C30B) were showed superior nucleation parameters, n and K values, in the Avrami plots. Enhanced equilibrium melting point and lower E _a suggests the reinforcing effect imparted by the BF surface treatments and C30B within the PLA matrix. Even though, Louritzen–Hoffmann theory was revealed that no change in crystallization regimes of PLA even after the biocomposite and bionanocomposite preparation. TG analysis revealed better heat barrier capacity for all the biocomposites and bionanocomposites in comparison with virgin PLA (V-PLA). Increased storage modulus values for biocomposites and bionanocomposites also confirm the reinforcing effects of the fillers. Heat deflection temperature and the flammability studies concluded better application window for newly developed materials than that V-PLA.     

Jasmonoids: Part 1. Dicarbanion Alkylation Approach to Synthesis of Z-Jasmone/Dihydrojasmone

Application of the dicarbanion alkylation strategy to 2-acetyl-4-methyl-butyrolactone 1 has resulted in a 4 step/5 step synthesis of dihydro-jasmone 6a/z-jasmone 7 respectively.     

Intramolecular Ketone-Olefin Radical Cyclization with Low-Valent Titanium Reagent: Synthesis of Benzopyrans

A novel protocol for intramolecular ketyl-olefin radical cyclization with low-valent titanium reagent is outlined. It allows the formation of the benzopyran nucleus from ortho-allyloxy propiophenones as the sole product in moderate yields via intramolecular radical cyclization.     

Advances in the Bestmann–Ohira Reagent–Assisted Regioselective Synthesis of Substituted Pyrazoles,Triazoles, and Oxazoles

The Bestmann–Ohira reagent serves as a versatile platform for the regioselective construction of pyrazoles, triazoles, and oxazoles via a cycloaddition reaction and multicomponent reaction. In this review, we have summarized the most significant advances in the Bestmann–Ohira reagent (BOR)–assisted construction of functionalized five–membered heterocycles reported in the literature up to 2012.