Chemical studies on antioxidant mechanisms and free radical scavenging properties of lignans

The antioxidant activity, in terms of radical scavenging capacity, of altogether 15 different lignans was measured by monitoring the scavenging of the free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH). The effect of differences in skeletal arrangement or the degree of oxidation of the lignans was investigated in a structure-activity relationship study. A large variety in the radical scavenging capacities of the different lignans was observed and related to some structural features. Lignans with catechol (3,4-dihydroxyphenyl) moieties exhibited the highest radical scavenging capacity, while the corresponding guaiacyl (3-methoxy-4-hydroxyphenyl) lignans showed a slightly weaker scavenging capacity. In addition, the butanediol structure was found to enhance the activity, whereas a higher degree of oxidation at the benzylic positions decreased the activity. Additionally, the readily available lignans (-)-secoisolariciresinol, a mixture of hydroxymatairesinol epimers and (-)-matairesinol were studied in more detail, including kinetic measurements and identification of oxidation products in the reactions with DPPH and ABAP (2,2-azobis(2-methylpropionamidine) dihydrochloride. The identification of reaction products, by GC-MS, HPLC-MS and NMR spectroscopy, showed that dimerisation of the two aromatic moieties was the major radical termination reaction. Also, the formation of adducts was a predominant reaction in the experiments with ABAP. The kinetic data obtained from the reactions between the lignans and DPPH indicated a complex reaction mechanism.     

Synthesis of Aristotelia-Type Alkaloids. Part III. (3R,4R)- and (3R,4S)-1-p-menthene-3,8-diol and the corresponding racemates: Preparation and assignment of configuration

A 1:1 mixture of the racemic trans- and cis-1-p-menthene-3,8-diols ((±)- 3 and (±)- 4 , resp.) was readily prepared in 3 steps starting from 3-methyl-2-cyclohexen-1-one. The relative configuration of the diols, purified via the corresponding cyclocarbonates, was assigned by ¹H-NMR spectroscopy and found to be at variance with tentative claims in the literature. Optically active samples of 3 and 4 were prepared by resolution of the racemates with (R)-1-phenylethylamine. The absolute configuration of the resulting diols was determined by chemical correlation with standards of known absolute configuration.     

The platinum catalyst [bpyrPtCl2] in superacidic solution

The methane oxidation catalyst [bpyrPtCl(2)] (bpyr = bis-pyrimidine) dissolves in superacidic HF/SbF(5) solution under formation of a dinuclear cation [H(2)bpyrPt(mu-Cl)(2)PtbpyrH(2)](6+). Two crystal forms are isolated, [Pt(2)Cl(2)bpyr(2)H(4)](6+)(SbF(6)(-))(4)(Sb(2)F(11)(-))(2).2HF (I) (triclinic, Ponemacr;, a = 814.8(2) pm, b = 1444.8(3) pm, c = 2300.5(5) pm, alpha = 89.627(4) degrees, beta = 84.285(4) degrees, gamma = 84.665(4) degrees, Z = 2) and [Pt(2)Cl(2)bpyrH(4)](6+)(Sb(2)F(11)(-))(6).4HF (II) (triclinic, Ponemacr;, a = 879.4(2) pm, b = 1170.4(3) pm, c = 1789.9(5) pm, alpha = 95.37(2) degrees, beta = 99.97(2) degrees, gamma = 100.41(2) degrees, Z = 1). The cation in I has an angle of 148.4(1) degrees between the two square plane platinum environments, while the cation in II is fully planar. The non-platinum-bound nitrogen atoms are all protonated in the superacidic medium.     

Facile synthesis of novel functionalized bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) derivatives

An improved and efficient synthetic route to four functionalized bis(ethylenedithio)-tetrathiafulvalene (BEDT-TTF) derivatives 2-5 is reported. Tetrathiolate 1 was readily prepared from 2,2'-bis(1,3,4,6-tetrathiapentalen-5-one) under carefully controlled conditions. Subsequent reaction of 1 with selected primary alkyl halides affords new functionalized BEDT-TTF derivatives in good yields.     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Multicomponent coupling reactions for organic synthesis: chemoselective reactions with amide-aldehyde mixtures

The acid-catalyzed condensation chemistry of simple amides and aldehydes provides a highly prolific source of diverse reactants for irreversible follow-up reactions. Amide-aldehyde mixtures have been successfully employed in multicomponent syntheses of N-acyl alpha-amino acids (via palladium-catalyzed amidocarbonylation) and various cyclohexene, cyclohexadiene, and benzene derivatives (via the amide-aldehyde-dienophile (AAD) reaction).     

Improved third-order Møller-Plesset perturbation theory

Based on a partitioning of the total correlation energy into contributions from parallel‐ and antiparallel‐spin pairs of electrons, a modified third‐order Møller–Plesset (MP) perturbation theory is developed. The method, termed SCS–MP3 (SCS for spin‐component‐scaled) continues previous work on an improved version of MP2 (S. Grimme, J Chem Phys 2003, 118, 9095). A benchmark set of 32 isogyric reaction energies, 11 atomization energies, and 11 stretched geometries is used to assess to performance of the model in comparison to the standard quantum chemical approaches MP2, MP3, and QCISD(T). It is found, that the new method performs significantly better than usual MP2/MP3 and even outperforms the more costly QCISD method. Opposite to the usual MP series, the SCS third‐order correction uniformly improves the results. Dramatic enhancements are especially observed for the more difficult atomization energies, some of the stretched geometries, and reaction and ionization energies involving transition metal compounds where the method seems to be competitive or even superior to the widely used density functional approaches. Further tests performed for other complex systems (biradicals, C₂₀ isomers, transition states) demonstrate that the SCS–MP3 model yields often results of QCISD(T) accuracy. The uniformity with which the new approach improves for very different correlation problems indicates significant robustness, and suggests it as a valuable quantum chemical method of general use. © 2003 Wiley Periodicals, Inc. J Comput Chem 24: 1529–1537, 2003     

In situ Fe K-edge X-ray absorption fine structure of a nitrosyl adduct of iron phthalocyanine irreversibly adsorbed on a high area carbon electrode in an acidic electrolyte

Key aspects of the microenvironment surrounding the Fe center in the nitrosyl adduct of iron phthalocyanine, [Fe(Pc)(NO)], have been elucidated from the analysis of the Fe K-edge extended X-ray absorption fine structure (EXAFS) of the material adsorbed on the surface of a high area carbon electrode recorded in situ, in 0.5 M H(2)SO(4). Statistical best fits to the EXAFS data place the Fe center in a five-coordinated square pyramidal configuration shifted away from the Pc plane toward the axially bound NO bent at an angle of ca. 40 degrees with respect to the normal to the Pc plane. This environment is analogous to that of Fe in the nitrosyl adduct of crystalline [Fe(TPP)], where TPP = meso-tetraphenylporphyrinato(2-), determined from X-ray diffraction.     

Efficient synthesis of sulfonic,phosphoric, and phosphinic esters employing alkylating polymer-bound reagents

The efficient esterification of various sulfonic acids and sulfonates using polymer-bound triazenes based on the triazene T2 linker is described. Esterification of enantiopure alpha-substituted sodium sulfonates was performed in the presence of an alkylating resin without racemization. Racemization is a serious drawback in the esterification route via sulfonyl chlorides because of intermediate sulfene formation. To demonstrate the versatility of this protocol, phosphoric and phosphinic acids have been converted into the corresponding esters as well. All products were obtained in good yield and excellent purities without any further purification steps.