A mass spectrometry study of XCO+, X=Si, Ge: is SiCO+ a main group carbonyl? Comments on the bonding in ground state SiCO and the

The cation [Si,C,O]+ has been generated by 1) the electron ionisation (EI) of tetramethoxysilane and 2) chemical ionisation (CI) of a mixture of silane and carbon monoxide. Collisional activation (CA) experiments performed for mass-selected [Si,C,O]+, generated by using both methods, indicate that the structure is not inserted OSiC+; however, a definitive structural assignment as Si(+)-CO, Si(+)-OC or some cyclic variant is impossible based on these results alone. Neutralisation-reionisation (+NR+) experiments for EI-generated [Si,C,O]+ reveal a small peak corresponding to SiC+, but no detectable SiO+ signal, and thus establishes the existence of the Si(+)-CO isomer. CCSD(T)@B3LYP calculations employing a triple-zeta basis set have been used to explore the doublet and quartet potential-energy surfaces of the cation, as well as some important neutral states. The results suggest that both Si(+)-CO and Si(+)-OC isomers are feasible; however, the global minimum is 2 pi SiCO+. Isomeric 2 pi SiOC+ is 12.1 kcal mol-1 less stable than 2 pi SiCO+, and all quartet isomers are much higher in energy. The corresponding neutrals Si-CO and Si-OC are also feasible, but the lowest energy Si-OC isomer (3A") is bound by only 1.5 kcal mol-1. We attribute most, if not all, of the recovery signal in the +NR+ experiment to SiCO+ survivor ions. The nature of the bonding in the lowest energy isomers of Si(+)-(CO,OC) is interpreted with the aid of natural bond order analyses, and the ground state bonding of SiCO+ is discussed in relation to classical analogues such as metal carbonyls and ketenes.     

A computational study of bond dissociation enthalpies in haloethenes

Carbon–hydrogen bond dissociation enthalpies (BDEs) were computed for all haloethenes, C₂H_4−nX_n (n=0–3, X=F, Cl, Br, I), at the B3LYP/6-311+G(3df,2p) level using isodesmic reactions. It was found that C–H bond strengths in the monohaloethenes varied substantially, by as much as 18 kJ mol⁻¹, dependent upon the bond's stereochemical position relative to the halogen. BDEs in the dihaloethanes varied in the order CX₂CH–H>(E)-CHXCX–H>(Z)-CHXCX–H. Trends in the computed bond enthalpies were discussed and explained on the basis of relative steric repulsions and hyperconjugative delocalization interactions, as determined from Natural Bond Orbital analysis.     

One-pot synthesis of 1-aryl-3-methyl-1,3-dienes using methallyl(trimethyl)silane and aldehydes and their low temperature (Z)→(E) isomerization induced by sulfur dioxide

2-Methylprop-2-ene-1-sulfonyl fluorides can be easily prepared via the ene reaction of methallylsilanes and SO₂. In the presence of a base, aldehydes and 2-methylprop-2-ene-1-sulfonyl fluorides give 1,3-(E) and (Z)-dienes. Their (Z)→(E) isomerization by classical means fails or leads to their polymerization. It is shown that SO₂ can isomerize 1-aryl-3-methyl-1,3-dienes at low temperature, without formation of sulfolenes (cheletropic addition/elimination). Preliminary mechanistic studies suggest that SO₂ adds to 1,3-dienes forming 1,4-diradical intermediates that are responsible for the (Z)→(E) isomerizations.     

Sulfur dioxide mediated one-pot, three- and four-component syntheses of polyfunctional sulfonamides and sulfonic esters: study of the stereoselectivity of the ene reaction of sulfur dioxide

The ene reaction of sulfur dioxide with enoxysilanes or with allylsilanes generates silyl sulfinates that can be brominated (Br(2) or NBS) or chlorinated (NCS or Cl(2)) to produce the corresponding sulfonyl halides. They react with primary and secondary amines or alcohols to give the corresponding sulfonamides and sulfonic esters, respectively. The hetero-Diels-Alder addition of sulfur dioxide to 1-oxy- or 1,3-dioxy-1,3-dienes generates zwitterions that add to enoxysilanes or allylsilanes giving silyl sulfinates that can be converted in situ into polyfunctional sulfonamides or sulfonic esters. This realizes quick access to libraries of complicated sulfonamides and sulfonic esters applying one-pot, three- and four-component methods.     

Simple method for the determination of rosiglitazone in human plasma using a commercially available internal standard

To the best of our knowledge, bioanalytical methods to determine rosiglitazone in human plasma reported in literature use internal standards that are not commercially available. Our purpose was to develop a simple method for the determination of rosiglitazone in plasma employing a commercially available internal standard (IS). After the addition of celecoxib (IS), plasma (0.25 mL) samples were extracted into ethyl acetate. The residue after evaporation of the organic layer was dissolved in 750 microL of mobile phase and 50 microL was injected on to HPLC. The separation was achieved using a Hichrom KR 100, 250 x 4.6 mm C(18) with a mobile phase composition potassium dihydrogen phosphate buffer (0.01 m, pH 6.5):acetonitrile:methanol (40:50:10, v/v/v). The flow-rate of the mobile phase was set at 1 mL/min. The column eluate was monitored by fluorescence detector set at an excitation wavelength of 247 nm and emission wavelength of 367 nm. Linear relationships (r(2) > 0.99) were observed between the peak area ratio rosiglitazone to IS vs rosiglitazone concentrations across the concentration range 5-1000 ng/mL. The intra-run precision (%RSD) and accuracy (%Dev) in the measurement of rosiglitazone were <+/-10.69 and <-12.35%, respectively across the QC levels (50-1000 ng/mL). The extraction efficiency was >80% for both rosiglitazone and IS from human plasma. The lower limit of quantitation of the assay was 5 ng/mL. In summary, the methodology for rosiglitazone measurement in plasma was simple, sensitive and employed a commercially available IS.     

High-performance liquid chromatographic determination of xanthohumol in rat plasma, urine, and fecal samples

Xanthohumol (XN) is the major prenylated flavonoid in hop plants and as such a constituent of beer. Pharmacological studies have shown that XN possesses marked antioxidant and antiproliferative effects. In order to study the resorption and metabolism of this compound, reversed-phase high-performance liquid chromatography is used for the determination of XN in rat plasma, urine, and feces. In session one, rats receive either oral or intravenous (iv) administration (20 mg/kg body weight) of XN. In session two, rats receive oral administration of 50, 100, 200, 400, and 500 mg/kg body weight XN for bioavailability studies at various dose levels. Plasma, urine, and feces are collected at varying time points and assayed for their XN content. Plasma levels of XN fell rapidly within 60 min after iv administration; no XN is detected in plasma after oral administration in either session. XN and its metabolites are excreted mainly in feces within 24 h of administration. The method is a reliable tool for performing studies of XN in different biological material.     

Organosulfur compounds: electrophilic reagents in transition-metal-catalyzed carbon-carbon bond-forming reactions

Transition-metal-catalyzed carbon-carbon bond-forming reactions are among the most powerful methods in organic synthesis and play a crucial role in modern materials science and medicinal chemistry. Recent developments in the area of ligands and additives permit the cross-coupling of a large variety of reactants, including inexpensive and readily available sulfonyl chlorides. Their desulfitative carbon-carbon cross-coupling reactions (Negishi, Stille, carbonylative Stille, Suzuki-Miyaura, and Sonogashira-Hagihara-type cross-couplings and Mizoroki-Heck-type arylations) are reviewed together with carbon-carbon cross-coupling reactions with other organosulfur compounds as electrophilic reagents.     

Ge2H2 a π-ligand in organometallic chemistry

η² π-Complexes of Ge₂H₂ with the organometallic fragments V(PH₃)₂(I)(CO)₂, Cr(CO)₄, Co(PH₃)₂(Cl) and M(PH₃)₂ (M = Ni, Pd, Pt) have been studied at the B3LYP level using the SBKJC relativistic effective core potentials and their associated basis sets on metals and iodine, and the 6-31G(d) basis set on all other elements. The transition metal fragments of V, Cr, Co, Ni, Pd and Pt were chosen based on known alkyne compounds. All the complexes are local minima for both the HGeGeH and GeGeH₂ isomers of the Ge₂H₂ ligand. The complexes containing GeGeH₂ isomer as a ligand are lower in energy than those with the HGeGeH ligand (except in the V complex in which the difference is only 1.0 kcal/mol). There is a net charge transfer from ligand to metal in complexes V-Co and from metal to ligand in late transition metal complexes (Ni-Pt).     

Antibody-recruiting protein-catalyzed capture agents to combat antibiotic-resistant bacteria

Antibiotic resistant infections are projected to cause over 10 million deaths by 2050, yet the development of new antibiotics has slowed. This points to an urgent need for methodologies for the rapid development of antibiotics against emerging drug resistant pathogens. We report on a generalizable combined computational and synthetic approach, called antibody-recruiting protein-catalyzed capture agents (AR-PCCs), to address this challenge. We applied the combinatorial protein catalyzed capture agent (PCC) technology to identify macrocyclic peptide ligands against highly conserved surface protein epitopes of carbapenem-resistant Klebsiella pneumoniae, an opportunistic Gram-negative pathogen with drug resistant strains. Multi-omic data combined with bioinformatic analyses identified epitopes of the highly expressed MrkA surface protein of K. pneumoniae for targeting in PCC screens. The top-performing ligand exhibited high-affinity (EC₅₀ ∼50 nM) to full-length MrkA, and selectively bound to MrkA-expressing K. pneumoniae, but not to other pathogenic bacterial species. AR-PCCs that bear a hapten moiety promoted antibody recruitment to K. pneumoniae, leading to enhanced phagocytosis and phagocytic killing by macrophages. The rapid development of this highly targeted antibiotic implies that the integrated computational and synthetic toolkit described here can be used for the accelerated production of antibiotics against drug resistant bacteria.

Antibody-recruiting protein-catalyzed capture agent (AR-PCCs) are a new class of all-synthetic and highly targeted antibiotics that recruit endogenous immune responses to eliminate drug-resistant microbes.