Response Factor Correction for Estimation of Ester Content in Biodiesel

EN 14103 is generally used for quantification of ester content in biodiesel free of heptadecanoate ester (C17:0) or methyl nonadecanoate (C19:0), which are employed as internal standards. It was observed that ester content obtained by EN 14103 method did not match with theoretical value of biodiesel, as the method did not take care of response factors of each component to compensate for changes in detector sensitivities. In this study, the whole range of fatty acid (C₆–C_24:1) methyl esters have been taken into consideration for the calculation of the ester content. Methyl nonadecanoate (C19:0) was used as an internal standard. The response factors of both the saturated and unsaturated methyl esters in the range C₆–C_24:1 were estimated and found in the range 0.97–1.16. The ester content was calculated after applying the response factors of each methyl ester. The results obtained by this method agreed well with the theoretical value as compared to estimated value using EN14103 method. The results obtained from this method also show good correlation (R ² = 0.98) with ¹H-NMR method. Further, this method does not depend on nature of biodiesel feed stock and is applicable to all methyl biodiesel samples obtained from different raw materials.     

Comparative determination of uranium in rock phosphates and columbite by ICP-OES,alpha &; gamma spectrometry

During this work selective separation of uranium from rock phosphate and columbite mineral was done before its quantitative estimation by using Inductively Coupled Plasma Optical Emission Spectrometery (ICP-OES). Uranium from the rock phosphate and columubite was extracted by sodium peroxide fusion followed by leaching in 2 M HNO₃. To avoid spectral interference in the estimation of uranium by ICP-OES, the selective separation of uranium from the leachate was carried out by using two different extractants, 30% Tributyl Phophates (TBP) in CCl₄ and a equi-volume mixture of Di(2-ethylhexyl) phosphoric acid (D2EHPA) & TBP in petrofin. Uranium was stripped from the organic phase by using 1 M ammonium carbonate solution. Determination of uranium by ICP-OES was done after dissolving the residue left after evaporation of ammonium carbonate solution in 4% HNO₃. The concentration of the uranium observed in the rock phosphates samples was 40–200 μg g⁻¹ whereas in columbite samples the concentration range was 100–600 μg g⁻¹. Uranium concentration evaluated by ICP-OES was complimented by gamma & alpha spectrometry. Concentration of uranium evaluated by gamma spectrometry in case of rock phosphate and coulmbite was in close agreement with the uranium content obtained by ICP-OES. Uranium determination by alpha spectrometry showed only minor deviation (1–2%) from the results obtained by ICP-OES in case of rock phosphates whereas in case of coulmbites results are off by 20–30%.     

PP2A in the regulation of cell motility and invasion

Cell motility is a very critical phenomenon that plays an important role in the development of eukaryotic organisms. One of the well studied cell motility phenomena is chemotaxis, which is described as a directional movement of cell in response to changes in external chemotactic gradient. Numerous studies conducted both in unicellular organism and in mammalian cells have demonstrated the importance of phosphatidylionositol-3 kinase (PI3K) in this process. In addition, it is now well established that although PI3K plays an activation role in chemotaxis, the role of phosphatases is also critical to maintain this dynamic cyclical process. Protein phosphatase 2A (PP2A) is a major serine/threonine phosphatase that is a key player in regulating PI3K signaling. PP2A is abundantly and ubiquitously expressed and has been highly conserved during the evolution of eukaryotes. PP2A is composed of three protein subunits, A, B, and C. Subunit 'A' is a 60-65 kDa structural component, 'C' is a 36-38 kDa catalytic subunit, and 'B' is a 54-130 kDa regulatory subunit. The core complex of PP2A is comprised of the A and C subunits, which are tightly associated and this dimeric core complexes with the regulatory B subunit. The B subunit determines the substrate specificity as well as the spatial and temporal functions of PP2A. PP2A plays an important role in regulating multiple signal transduction pathways, including cell-cycle regulation, cell-growth and development, cytoskeleton dynamics, and cell motility. This review focuses on the role of PP2A in regulating motility of normal and transformed cells.     

Photophysical behavior of acridine with amines within the micellar microenvironment of SDS: a time-resolved fluorescence and laser flash photolysis study

The photophysical behavior of acridine (Acr) shows a facilitated water assisted protonation equilibrium between its deprotonated (Acr* ～ 3.4 ns) and protonated forms (AcrH(+)* ～ 33 ns) within a confined environment of sodium dodecyl sulphate (SDS) micelles above the critical micellar concentration of 8 mM. The acidic interface of the micelles is capable of protonating Acr whereas deprotonated Acr is partitioned into the hydrophobic core. The time-resolved-area-normalized-emission spectra confirm the presence of both Acr* and AcrH(+)*, while time-resolved-emission spectra depict time evolution between them. Quenching of AcrH(+)* with triethylamine (TEA) results in a linear Stern-Volmer (S-V) plot, whereas non-linearity arises with N,N-dimethylaniline (DMA). Both steady-state and time-resolved quenching results with TEA are explained on the basis of excited state proton transfer (ESPT), however the reasons behind the quenching of excited Acr with DMA are proposed as ESPT followed by a photoinduced electron transfer. Partitioning of DMA at the interface makes it accessible for both Acr* and AcrH(+)* in hydrophobic and hydrophilic regions of micelles respectively. The rate of electron transfer at the interface is found to be slower compared to that in the hydrophobic core. Characterization of transient intermediates formed during ESPT and PET between Acr and amines by laser-flash photolysis also supports the observation obtained during fluorescence studies. The mode of interactions between Acr and amines inside micelles is controlled by the localization of the proton/electron donors and acceptors in different hydrophobic or hydrophilic regions of such nano-confined environments.     

Low temperature thermoelectric properties of Cu intercalated TiSe2: a charge density wave material

Y₂O₃ nanoparticles and nanorods have been firstly synthesized in bulk Ti-Y films prepared by magnetron sputtering on Si (100) substrates at different temperatures. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDS) are used to characterize the structure, morphology, and composition of the as-synthesized nanoparticles and nanorods. The mechanical properties of the sputtered films are investigated using nanoindentation techniques. The results indicate that both the nanoparticles and nanorods have a pure cubic Y₂O₃ structure resulting from the reaction of Y atoms with the residual O₂ in the vacuum chamber, and are free from defects and dislocations with uniform diameters of about 30 nm. The Y₂O₃ nanoparticles mainly distribute at the grain boundaries of the Ti matrix and the nanorods have lengths ranging from 250 nm to more than 1 μm with the growth direction parallel to the (002) plane. As the growth temperature elevates, the nanoparticles turn to be coarsening while more and longer nanorods are inclined to form. Compared with the Ti film, the TiY films have a remarkable increase in hardness, but do not exhibit expected increase in elastic modulus. Finally, the growth mechanism is also briefly discussed.     

Stationary response with exponential transformation: A perturbative analysis for molecular static properties

We present here a perturbative analysis of the coupled cluster response method for molecular static properties with Euler and extended coupled cluster functionals under cubic truncation. Comparative analysis is meant to cater to both pedagogical and practical interests. Comprehensive tables for energy-derivative expressions and equations at the stationary point are presented. © 1995 John Wiley & Sons, Inc.     

On the non-existence of a rationality definition for extensive games

Standard solution concepts, like subgame perfection, implicitly require that players will continue to assume everybody is rational even if this has been revealed to be false by virtue of having reached a node that could not have been reached had all players behaved rationally. Several attempts have been made in the literature to solve this problem. The present paper shows that the problem is insoluble.     

Multivariate Exponential Distributions with Constant Failure Rates

In this paper a multivariate failure rate representation based on Cox's conditional failure rate is introduced, characterizations of the Freund–Block and the Marshall–Olkin multivariate exponential distributions are obtained, and generalizations of the Block–Basu and the Friday–Patil bivariate exponential distributions are proposed.