Effect of surface‐grafted ionic groups on the performance of cellulose‐fiber‐reinforced thermoplastic composites

The influence of the surface chemistry of the cellulose fiber and polymer matrix on the mechanical and thermal dynamic mechanical properties of cellulose‐fiber‐reinforced polymer composites was investigated. The cellulose fiber was treated either with a coupling agent or with a coupling‐agent treatment followed by the introduction of quaternary ammonium groups onto the fiber surface, whereas the polymer matrix, with opposite polar groups such as polystyrene incorporated with sulfonated polystyrene and poly(ethylene‐co‐methacrylic acid), was compounded with the fiber. The grafting of the fiber surface was investigated with Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. Experimental results showed that an obvious improvement in the mechanical strength could be achieved for composites with an ionic interface between the fiber and the polymer matrix because of the adhesion enhancement of the fiber and the matrix. The improved adhesion could be ascribed to the grafted ionic groups at the cellulose‐fiber surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2022–2032, 2003     

Synthesis and Photophysical Properties of Fluorescein Esters as Potential Organic Semiconductor Materials

Journal of Fluorescence - Fluorescein (1), a known fluorescent tracer in microscopy with high photophysical properties, was esterified to have fluorescein ethyl ester (2) and O-ethyl-fluorescein...     

Unexpected Synthesis of Novel 3-Allyl-5-(arylidene)-2-thioxo-thiazolidin-4-ones in Reactions of 3-Allylrhodanine with 2-Arylidene-4-methyl-5-oxopyrazolidinium Ylides

Abstract

The reaction of 3-allylrhodanine with 2-arylidene-4-methyl-5-oxopyrazolidinium ylides proceeded unexpectedly to form novel 3-allyl-5-(arylidene)-2-thioxo-thiazolidin-4-ones 6a–k in good yields. All structures have been formulated on the basis of their spectral (IR, NMR, MS) data and elemental analyses. In addition, the structure of compound 6a was confirmed by means of x-ray crystallographic analysis.     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate) [poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

Radioanalytical prediction of radiative capture in 99Mo production via transmutation adiabatic resonance crossing by cyclotron

In this study, the transmutation adiabatic resonance crossing (TARC) concept was estimated in ⁹⁹Mo radioisotope production via radiative capture reaction in two designs. The TARC method was composed of moderating neutrons in lead or a composition of lead and water. Additionally, the target was surrounded by a moderator assembly and a graphite reflector district. Produced neutrons were investigated by (p,xn) interactions with 30 MeV and 300 μA proton beam on tungsten, beryllium, and tantalum targets. The ⁹⁹Mo production yield was related to the moderator property, cross section, and sample positioning inside the distinct region of neutron storage as must be proper to achieve gains. Gathered thermal flux of neutrons can contribute to molybdenum isotope production. Moreover, the sample positioning to gain higher production yield was dependent on a greater flux in the length of thermal neutrons and region materials inside the moderator or reflector. When the sample radial distance from Be was 38 cm inside the graphite region using a lead moderator design, the production yield had the greatest value of activity, compared with the other regions, equal to 608.72 MBq/g. Comparison of the two designs using a Be target revealed that the maximum yield occurred inside the graphite region for the first design at 38 cm and inside the lead region for the second design at 10 cm. The results and modeling of the new neutron activator were very encouraging and seem to confirm that the TARC concept can be used for ⁹⁹Mo production in nuclear medicine.     

Preparation of water-soluble magnetic nanocrystals using aryl diazonium salt chemistry

A novel and facile methodology for the in situ surface functionalization of Fe(3)O(4) nanoparticles is proposed, based on the use of aryl diazonium salts chemistry. The grafting reaction involves the formation of diazoates in a basic medium. These species are unstable and dediazonize along a homolytic pathway to give aryl radicals which further react with the Fe(3)O(4) NPs during their formation and stop their growth. Advantages of the present approach rely not only on the simplicity, rapidity, and efficiency of the procedure but also on the formation of strong Fe(3)O(4)-aryl surface bonds, highly suitable for further applications.     

Diastereodivergent behavior of alkyl versus cyano allenylcuprates toward aldehydes: a key role for lithium

The stereodivergent behavior of allenyl(cyano)- and allenyl(alkyl)cuprates toward aldehydes, providing a selective preparation of both syn- and anti-homopropargylic alcohols, is described. This study, which combines both experimental and theoretical support, shows that the copper nontransferred "dummy ligand" controls the localization of the lithium cation with respect to the allenylcuprate moiety. As a consequence, Li(+) acts as a Lewis acid activator but also controls the diastereoselectivity during the addition of allenylcuprates onto aldehydes. The combined high selectivity, efficiency, and versatility of these cuprate compounds opens the way to new one-pot synthetic procedures, as illustrated by the combined Klein rearrangement/transmetalation methodology described herein.     

Approximate Controllability of Semilinear Fractional Stochastic Dynamic Systems with Nonlocal Conditions in Hilbert Spaces

A class of dynamic control systems described by semilinear fractional stochastic differential equations of order 1 < q < 2 with nonlocal conditions in Hilbert spaces is considered. Using solution operator theory, fractional calculations, fixed-point technique and methods adopted directly from deterministic control problems, a new set of sufficient conditions for nonlocal approximate controllability of semilinear fractional stochastic dynamic systems is formulated and proved by assuming the associated linear system is approximately controllable. As a remark, the conditions for the exact controllability results are obtained. Finally, an example is provided to illustrate the obtained theory.     

Relaxed Locally Identifying Coloring of Graphs

A locally identifying coloring (lid-coloring) of a graph is a proper vertex-coloring such that the sets of colors appearing in the closed neighborhoods of any pair of adjacent vertices having distinct neighborhoods are distinct. Our goal is to study a relaxed locally identifying coloring (rlid-coloring) of a graph that is similar to locally identifying coloring for which the coloring is not necessarily proper. We denote by \(\chi _{rlid}(G)\) the minimum number of colors used in a relaxed locally identifying coloring of a graph G. In this paper, we prove that the problem of deciding that \(\chi _{rlid}(G)=3\) for a 2-degenerate planar graph G is NP-complete and for a bipartite graph G is polynomial. We give several bounds of \(\chi _{rlid}(G)\) for different families of graphs and construct new graphs for which these bounds are tight. We also compare this parameter with the minimum number of colors used in a locally identifying coloring of a graph G (\(\chi _{lid}(G)\)), the size of a minimum identifying code of G (\(\gamma _{id}(G)\)) and the chromatic number of G (\(\chi (G)\)).