Qualitative interpretation of physico-chemical and isotopic parameters in the Krka River (Croatia) assessed by multivariate statistical analysis

Multivariate statistical analyses were applied on the measured physico-chemical (Cd, Pb, Cu, Zn, Mg, Ca, O₂, alkalinity, temperature, pH, SAS, DOC and DIC) and isotopic parameters (δ¹³C and δ¹⁸O) to estimate and distinguish anthropogenic from natural influences to the water system of the Krka River. Analyses were conducted on the data collected during six years from twelve sampling sites. On the basis of orientation, positioning and grouping of parameters arranged by biplots, four main hypotheses were defined and finally statistically confirmed. Thereof, two main and distinct processes occurring in the Krka River could be highlighted: (i) upstream pollution, caused by the inflow of untreated waste-waters of city of Knin and (ii) downstream self-purification, caused by the sedimentation and/or co-precipitation of pollutants coupled by the inflow of clean subterranean water (groundwater recharge). Grouping of (i) hydrological and carbon cycle connected parameters, and (ii) anthropogenically influenced correlated parameters were proposed as a result of statistical analysis. Regarding the pH, it is shown that a stream section influenced by the subterranean inflow of Zrmanja River is statistically significantly different for all sampling campaigns during six years, being lower for about 0.5 pH unit.     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.     

Spectral characterisation of new organic fluorescent dyes with an alkoxysilane moiety and their utilisation for the labelling of layered silicates

New fluorescence dyes with an alkoxysilane moiety were synthesised by the condensation of 3-(triethoxysilyl)-1-propanamine (3-aminopropyltriethoxysilane) with 4,10-benzothioxanthene-3,1′-dicarboxylic acid anhydride (BTXA) and N,N-dimethylaminonaphthalene-1,8-dicarboxylic acid anhydride (DMANA), which was accompanied by the formation of an imidic bridge. The compounds N-(3-(triethoxysilyl)propyl)-thioxantheno[2,1,9-dej]isoquinoline-1,3-dione (BTX-S) and 4-(N′, N′-dimethyl)-N-(triethoxysilyl)propyl-1,8-naphthalene dicarboxylic acid imide (DMAN-S) were characterised by steady-state and time-resolved fluorescence spectroscopy in chloroform and ethanol. Both conjugates (BTX-S and DMAN-S) exhibited absorption and emission bands in the same region as the un-substituted BTXA and DMANA. An important Stokes shift was observed for DMAN-S in ethanol. A high fluorescence quantum yield was observed for BTX-S in both solvents and for DMAN-S in chloroform. In addition, the newly developed fluorescent silane dyes were covalently attached to the microscopic particles of layered silicates and on the surface of SiO₂ wafers as a proof of concept for fluorescence particle (surface) visualisation. The surface wafer modification was precisely characterised by X-ray photoelectron spectroscopy (XPS). Successful covalent linkage onto the particles of layered silicates was proved by confocal laser scanning microscopy technique.     

Synthesis and properties of macrocyclic diazene switch with binaphthalene unit attached via acrylamide linkers

2,2′-Diiodo-1,1′-binaphthalene undergoes a tandem Heck reaction with methyl acrylate to afford methyl 2-(7H-dibenzo[c,g]fluoren-7-ylidene)acetate. As a consequence, the target macrocyclic diazene with binaphthalene unit attached via acrylamide linker was prepared by the stepwise building of acrylamide at a binaphthalene moiety, including the Doebner modification of the Knoevenagel condensation, and completed by oxidative macrocyclisation of aniline end-groups. Despite being an equimolar mixture of monomer and dimer, it exhibited remarkable changes in CD spectra due to reversible (E/Z) isomerisation of N=N diazene bonds upon irradiation at 365/465 nm. Although the dimer isomerises from (E) to (Z) isomer 7.4 times faster than the monomer, the latter’s contribution to the change in ellipticity at 307 nm in the photostationary state is 2.4 times greater.     

Biologically Active 1-Aminodeoxy and 1-O-Alkyl Derivatives of The Powerful D-Glucosidase Inhibitor 2,5-Dideoxy-2,5-Imino-D-Mannitol

ABSTRACT

By an Amadori rearrangement of easily available 5-azido-5-deoxy-D-glucofuranose with dibenzylamine and subsequent catalytic hydrogenation of the resulting 5-azido-1-(N,N-dibenzyl)amino-1,5-dideoxy-D-fructopyranose, 1-amino-1,2,5-trideoxy-2,5-imino-D-mannitol was obtained in only two steps and in excellent overall yield. Likewise, other amines were employed to introduce extended side chains ultimately suitable for attachment of the inhibitor to solid supports. The reported rearrangement reaction is a high yielding, convenient and apparently general entry to 1-aminodeoxyketopyranoses modified at C-5, facilitated by the ring enlargement of the aldofuranose to the ketopyranose as an additional driving force. A range of selected chain extended analogues was prepared by acylation of N-1. Inhibitors obtained exhibit K _i-values with D-glucosidases in the micromolar range. Interestingly, 1-N-acylation resulted in superior inhibitory activities, as did the addition of a hexyl chain.     

pH‐Dependent Coordination of AgI Ions by Histidine: Experiment,Theory, and a Model for SilE

Artificial implants and biomaterials lack the natural defense system of our body and, thus, have to be protected from bacterial adhesion and biofilm formation. In addition to the increasing number of implanted objects, the resistance of bacteria is also an important problem. Silver ions are well‐known for their antimicrobial properties, yet not a lot is known about their mode of action. Silver is expected to interact on many levels, thus the development of silver resistance is very difficult. Nevertheless, some bacteria are able to resist silver, even at higher concentrations. One such defense mechanism of bacteria against heavy‐metal intoxication includes an efflux system. SilE, a periplasmic silver‐binding protein that is involved in this defense mechanism, has been shown to possess numerous histidine functions, which strongly bind to silver atoms, as demonstrated by ourselves previously. Herein, we address the question of how histidine binds to silver ions as a function of pH value. This property is important because the local proton concentration in cells varies. Thus, we solved the crystal structures of histidine–silver complexes at different pH values and also investigated the influence of the amino‐acid configuration. These results were completed by DFT calculations on the binding strength and packing effects and led to the development of a model for the mode of action of SilE.     

Finished-vehicle transporter routing problem solved by loading pattern discovery

This work addresses a new transportation problem in outbound logistics in the automobile industry: the finished-vehicle transporter routing problem (FVTRP). The FVTRP is a practical routing problem with loading constraints, and it assumes that dealers have deterministic demands for finished vehicles that have three-dimensional irregular shapes. The problem solution will identify optimal routes while satisfying demands. In terms of complex packing, finished vehicles are not directly loaded into the spaces of transporters; instead, loading patterns matching finished vehicles with transporters are identified first by mining successful loading records through virtual and manual loading test procedures, such that the packing problem is practically solved with the help of a procedure to discover loading patterns. This work proposes a mixed-integer linear programming (MILP) model for the FVTRP considering loading patterns. As a special class of routing models, the FVTRP is typically difficult to solve within a manageable computing time. Thus, an evolutionary algorithm is designed to solve the FVTRP. Comparisons of the proposed algorithm and a commercial MILP solver demonstrate that the proposed algorithm is more effective in solving medium- and large-scale problems. The proposed scheme for addressing the FVTRP is illustrated with an example and tested with benchmark instances that are derived from well-studied vehicle routing datasets.     

Chinese regional energy efficiency change and its determinants analysis: Malmquist index and Tobit model

China becomes the largest energy consumer in 2010 but its energy productivity is well below the world average. To meet China’s fast growing energy using, energy efficiency should be especially emphasized under China’s energy policy. This paper focuses on the regional level of energy efficiency change in China. And we analyze total factor energy efficiency for 30 Chinese provinces over the period 1998–2009 using Malmquist index method and Tobit analysis. The Malmquist estimation results suggest there is a dropping change trend of energy productivity growth. Chinese energy efficiency still faces with huge regional disparity, but the energy technical efficiency reflects convergence in the nationwide and west region. As a result of Tobit regression, we find that industrial structure, energy consumption structure and institutional factor have different influences on energy efficiency.     

Almost Sure Approximation of the Superposition of the Random Processes

This article presents sufficient conditions, which provide almost sure (a.s.) approximation of the superposition of the random processes S(N(t)), when càd-làg random processes S(t) and N(t) themselves admit a.s. approximation by a Wiener or stable Lévy processes. Such results serve as a source of numerous strong limit theorems for the random sums under various assumptions on counting process N(t) and summands. As a consequence we obtain a number of results concerning the a.s. approximation of the Kesten–Spitzer random walk, accumulated workload input into queuing system, risk processes in the classical and renewal risk models with small and large claims and use such results for investigation the growth rate and fluctuations of the mentioned processes.     

Penultimate Approximations in Statistics of Extremes and Reliability of Large Coherent Systems

In reliability theory any coherent system can be represented as either a series-parallel or a parallel-series system. Its lifetime can thus be written as the minimum of maxima or the maximum of minima. For large-scale coherent systems it is sensible to assume that the number of system components goes to infinity. Then, the possible non-degenerate extreme value laws either for maxima or for minima are eligible candidates for the system reliability or at least for the finding of adequate lower and upper bounds for the reliability. The identification of the possible limit laws for the system reliability of homogeneous series-parallel (or parallel-series) systems has already been done under different frameworks. However, it is well-known that in most situations such non-degenerate limit laws are better approximated by an adequate penultimate distribution. Dealing with regular and homogeneous parallel-series systems, we assess both theoretically and through Monte-Carlo simulations the gain in accuracy when a penultimate approximation is used instead of the ultimate one.